Asus Dual GeForce RTX 5060 VS PNY GeForce RTX 5060 Dual Fan

When comparing the Performance specs of the Asus Dual GeForce RTX 5060 and the PNY GeForce RTX 5060 Dual Fan, the picture is immediately clear: every single metric is identical. Both cards share a base GPU clock of 2280 MHz and a boost clock of 2497 MHz, meaning neither card has been factory overclocked relative to the other. This results in the exact same theoretical throughput across the board — 19.18 TFLOPS of floating-point performance, a pixel fill rate of 119.9 GPixel/s, and a texture rate of 299.6 GTexels/s.

Under the hood, the architectural building blocks are also a perfect match: 3840 shading units, 120 TMUs, and 48 ROPs. These figures govern how efficiently the GPU handles geometry, shading workloads, and render output — and since they are equal, neither card holds any inherent advantage in rasterization pipelines or compute-heavy scenarios. Both also support Double Precision Floating Point (DPFP), which, while rarely critical for gaming, is a meaningful bonus for users running GPGPU workloads or professional applications alongside games.

In terms of raw performance, this comparison is a complete tie. There is no differentiator here that would give one card a real-world edge over the other in gaming, rendering, or compute tasks. Any performance difference a user might observe in practice would come down to cooling efficiency and sustained boost behavior — factors that fall outside these core spec figures. Buyers should look to other spec groups, such as thermal design or memory configuration, to find meaningful distinctions between these two cards.

The memory subsystems of the Asus Dual RTX 5060 and the PNY RTX 5060 Dual Fan are, once again, completely identical across every measurable dimension. Both cards come equipped with 8GB of GDDR7 VRAM — a meaningful generational step up from the GDDR6X found on previous-generation mid-range cards. GDDR7 delivers substantially higher bandwidth efficiency per pin, and that translates directly into the numbers here: an effective memory speed of 28000 MHz driving a peak bandwidth of 448 GB/s over a 128-bit bus.

That 448 GB/s figure deserves some context. A 128-bit memory bus is relatively narrow for a modern GPU, but GDDR7's dramatically improved data rates compensate effectively, pushing bandwidth that would have required a wider bus in previous generations. In practice, this means both cards should handle 1080p and 1440p workloads with comfortable headroom, though memory-bandwidth-hungry scenarios at 4K — particularly with large texture packs or high-resolution assets — may expose the limitations of the 8GB capacity ceiling rather than the bus width itself.

Both cards also support ECC memory, a feature typically associated with workstation-class hardware. For pure gaming use it is largely irrelevant, but for users running creative or compute workloads where data integrity matters, its presence is a genuine bonus. Ultimately, the memory group yields the same verdict as performance: a complete tie. There is no basis in the provided data to recommend one card over the other on memory grounds.

Feature parity continues to be the defining theme of this comparison. Both the Asus Dual RTX 5060 and the PNY RTX 5060 Dual Fan share an identical software and API feature set, anchored by DirectX 12 Ultimate support — the current gold standard for modern gaming, enabling hardware-accelerated ray tracing, mesh shaders, and variable rate shading in compatible titles. Alongside this, both cards support ray tracing and DLSS, NVIDIA's AI-driven upscaling technology, which is arguably one of the most practically impactful features on this list. DLSS allows users to render at a lower native resolution and reconstruct a sharp, high-quality image, delivering a meaningful performance uplift in supported games with minimal visual compromise.

Neither card supports XeSS, which is Intel's competing upscaling solution and largely redundant here given DLSS availability. Both also carry Intel Resizable BAR support, which allows the CPU to access the full GPU frame buffer at once rather than in smaller chunks — a feature that can yield modest but real frame rate gains in certain game engines. Multi-display support up to 4 simultaneous displays adds practical flexibility for productivity-focused users or sim enthusiasts running wide setups.

A couple of absences are worth noting: neither card features RGB lighting, which will suit users prioritizing a clean aesthetic or building in cases without windowed panels. The lack of LHR (Lite Hash Rate) on both is also a legacy non-issue at this point. Since every feature listed is shared equally, this group is an unambiguous tie — the decision between these two cards cannot hinge on software capabilities or feature support.

Both the Asus Dual RTX 5060 and the PNY RTX 5060 Dual Fan offer an identical port configuration: one HDMI 2.1b output and three DisplayPort outputs, totaling four display connections — consistent with the four-display limit noted in the Features group. HDMI 2.1b is the latest revision of the standard, supporting very high refresh rates at 4K and beyond, as well as features like Dynamic HDR, making it well-suited for connecting a modern gaming monitor or TV without any compromises.

The three DisplayPort outputs provide ample flexibility for multi-monitor productivity setups or mixed-display configurations. Neither card offers a USB-C output, which means users hoping to drive a USB-C or Thunderbolt-connected display directly from the GPU will need an active adapter. The complete absence of DVI and mini DisplayPort is expected at this product tier and generation — legacy connectivity has been phased out in favor of the higher-bandwidth modern standards these cards carry.

As with every other group in this comparison, the port layout is a perfect tie. Both cards will connect to the same range of monitors and displays with identical capability. Connectivity cannot serve as a differentiator here, and buyers should weigh other factors — such as pricing, cooler design, or warranty — when making their final choice.

At the foundational level, these two cards are built from the same silicon. Both are based on NVIDIA's Blackwell architecture, fabbed on a 5nm process with 21,900 million transistors, and both draw a maximum of 145W TDP. That shared power envelope means neither card will place meaningfully different demands on a system's PSU or case airflow, and thermal management expectations going in are essentially the same for both.

Where this group finally reveals a concrete, measurable difference is in physical dimensions. The Asus Dual RTX 5060 measures 228mm × 123mm, while the PNY RTX 5060 Dual Fan comes in at a notably more compact 200mm × 120mm. That 28mm difference in length is far from trivial — it can be the deciding factor for users building in smaller mid-tower or mini-ITX adjacent cases where GPU clearance is tight. The PNY's shorter footprint gives it a genuine compatibility advantage in constrained builds, without any trade-off in the underlying silicon or power characteristics.

Both cards connect via PCIe 5.0 and rely solely on air cooling, so interface bandwidth and cooling type are non-factors in differentiating them. On balance, the PNY RTX 5060 Dual Fan holds a practical edge in this group purely due to its smaller form factor, making it the more flexible choice for space-limited systems. For users with full-size cases, however, this distinction carries little weight.