Gigabyte GeForce RTX 5070 WindForce OC SFF VS Zotac Gaming GeForce RTX 5070 Solid

Both the Gigabyte WindForce OC SFF and the Zotac Gaming Solid are built on the same fundamental RTX 5070 silicon, sharing an identical 2325 MHz base clock, 6144 shading units, 192 TMUs, 80 ROPs, and 1750 MHz memory speed. This means the vast majority of their compute architecture is equivalent, and in sustained workloads where both cards settle near their base clocks, real-world performance will be virtually indistinguishable.

The only meaningful differentiator within this group is the boost clock: the Gigabyte's ″OC″ (factory overclocked) designation gives it a 2542 MHz turbo versus the Zotac's 2512 MHz — a 30 MHz or roughly 1.2% advantage. This flows directly into slightly higher derived metrics: 31.24 TFLOPS vs 30.87 TFLOPS in floating-point throughput, and 488.1 GTexels/s vs 482.3 GTexels/s in texture fill rate. In practice, a sub-2% boost clock delta rarely translates into a measurable FPS difference in games or rendering workloads; benchmarks would likely show results within the margin of run-to-run variance.

On performance alone, the Gigabyte WindForce OC SFF holds a marginal edge due to its higher factory boost clock, but this advantage is so slim that it should carry negligible weight in a purchasing decision. Buyers should prioritize other differentiators — such as cooling design, form factor, or price — over this near-negligible performance gap.

The memory specifications for the Gigabyte GeForce RTX 5070 WindForce OC SFF and the Zotac Gaming GeForce RTX 5070 Solid are identical. Both cards feature an effective memory speed of 28000 MHz and a maximum memory bandwidth of 672 GB/s. They also share the same VRAM capacity of 12GB and utilize the GDDR7 memory type. In addition, both cards have a 192-bit memory bus width and support ECC memory.

Since the memory configurations are the same, there is no difference between the two products in terms of memory performance or features.

The Gigabyte GeForce RTX 5070 WindForce OC SFF and the Zotac Gaming GeForce RTX 5070 Solid have identical feature sets. Both cards support DirectX 12 Ultimate, OpenGL 4.6, and OpenCL 3. They also offer multi-display technology, ray tracing, 3D support, and DLSS. Neither product supports XeSS (XMX), and both support Intel Resizable BAR (AMD SAM is not listed for either). Additionally, both cards do not have LHR (Lite Hash Rate) features and include RGB lighting.

In terms of display support, both the Gigabyte and Zotac cards can support up to 4 displays. The features of both models are identical, so there is no distinction between them in this category.

The ports for the Gigabyte GeForce RTX 5070 WindForce OC SFF and the Zotac Gaming GeForce RTX 5070 Solid are identical. Both cards feature 1 HDMI port with HDMI 2.1b support, and both provide 3 DisplayPort outputs. Neither card includes USB-C, DVI, or mini DisplayPort outputs.

As a result, there is no distinction between the two models in terms of port configuration, as they both offer the same set of connections.

The Gigabyte GeForce RTX 5070 WindForce OC SFF and the Zotac Gaming GeForce RTX 5070 Solid have identical specifications in most areas of general info. Both cards use the Blackwell GPU architecture, have a Thermal Design Power (TDP) of 250W, and feature the PCI Express (PCIe) version 5. The semiconductor size is the same at 5 nm, and both cards contain 31,100 million transistors. Neither product features air-water cooling.

However, there are slight differences in the physical dimensions. The Gigabyte card is 282 mm in width and 110 mm in height, while the Zotac card is slightly larger at 304.4 mm in width and 115.8 mm in height.