Inno3D GeForce RTX 5070 Ti iChill X3 VS PNY GeForce RTX 5070 Ti ARGB Epic-X Triple Fan

At their core, both the Inno3D iChill X3 and the PNY ARGB Epic-X are built on identical silicon foundations: the same 8960 shading units, 280 TMUs, 96 ROPs, and a matching base clock of 2295 MHz with identical memory speeds. This means any performance gap between them is purely a function of how aggressively each card boosts under load.

That is where the iChill X3 pulls ahead. Its GPU turbo reaches 2512 MHz compared to the PNY's 2452 MHz — a 60 MHz (roughly 2.4%) advantage. While that margin sounds modest, it compounds across every derived metric: the iChill X3 delivers 45.02 TFLOPS of floating-point throughput versus 43.94 TFLOPS for the PNY, and leads in both pixel fill rate (241.2 GPixel/s vs 235.4) and texture throughput (703.4 GTexels/s vs 686.6). In practice, the higher boost clock translates to a small but consistent performance edge in GPU-bound workloads — think demanding rasterization, AI-accelerated rendering, or compute tasks — though the real-world frame rate difference will typically fall within a 1–3% range.

The verdict for this group is clear: the Inno3D iChill X3 holds a measurable performance edge over the PNY ARGB Epic-X, driven entirely by its higher turbo clock. The PNY is not slow by any means, but buyers prioritizing peak throughput from the same GPU architecture should lean toward the iChill X3.

The Inno3D GeForce RTX 5070 Ti iChill X3 and the PNY GeForce RTX 5070 Ti ARGB Epic-X Triple Fan both share identical specifications when it comes to memory. Both models have an effective memory speed of 28000 MHz and a maximum memory bandwidth of 896 GB/s, ensuring high-speed data transfer for demanding tasks.

Both cards are equipped with 16GB of VRAM, which should provide ample memory for most gaming and professional workloads. The GDDR version used in both models is GDDR7, the latest standard for graphics memory.

In terms of memory bus width, both products also match with a 256-bit bus, providing a solid foundation for high-performance memory management. Additionally, both cards support ECC (Error-Correcting Code) memory, which adds a layer of reliability by detecting and correcting memory errors.

The Inno3D GeForce RTX 5070 Ti iChill X3 and the PNY GeForce RTX 5070 Ti ARGB Epic-X Triple Fan share identical feature specifications across the board. Both cards support DirectX 12 Ultimate, OpenGL 4.6, and OpenCL 3, ensuring full compatibility with modern graphics and compute workloads.

Both models also support multi-display technology, ray tracing, 3D, and DLSS, offering an enhanced visual experience for gaming and creative applications. Neither card has XeSS (XMX) support, meaning they do not feature Intel's AI-based image upscaling technology.

Both the Inno3D and PNY models support Intel's Resizable BAR technology, but not AMD SAM. Additionally, both have no Lite Hash Rate (LHR) restrictions, making them suitable for cryptocurrency mining. Both cards are equipped with RGB lighting and support up to four displays.

The Inno3D GeForce RTX 5070 Ti iChill X3 and the PNY GeForce RTX 5070 Ti ARGB Epic-X Triple Fan are identical when it comes to ports. Both models feature one HDMI output with HDMI 2.1b support, and both have three DisplayPort outputs. Neither card includes USB-C, DVI, or mini DisplayPort outputs.

With the same HDMI version and DisplayPort outputs, these two products provide a similar connectivity experience for users, ensuring compatibility with a wide range of modern displays and monitors.

Overall, the port options are the same on both cards, so users won’t experience any difference in terms of physical connectivity capabilities.

The Inno3D GeForce RTX 5070 Ti iChill X3 and the PNY GeForce RTX 5070 Ti ARGB Epic-X Triple Fan share the same key technical specifications. Both cards are built on the Blackwell GPU architecture, feature a 300W thermal design power (TDP), and utilize the PCI Express 5.0 interface for high-speed data transfer. They also have the same 5 nm semiconductor size and 45.6 billion transistors, which contribute to their performance capabilities.

Neither card includes air-water cooling, keeping the cooling method unspecified. The main physical difference between the two models lies in their size. The Inno3D card is 334 mm in width and 148 mm in height, while the PNY card is slightly smaller, measuring 299.5 mm in width and 120 mm in height.

Aside from the size difference, all other specifications in this group are identical, meaning both models offer the same GPU architecture, power requirements, and connectivity features.