Palit GeForce RTX 5070 GamingPro-S VS PNY GeForce RTX 5070 OC Triple Fan

Both cards share the same foundation: identical base clocks of 2325 MHz, the same 6144 shading units, 192 TMUs, 80 ROPs, and matching memory speeds of 1750 MHz. This confirms they are built on the same silicon and memory configuration, meaning their performance gap is driven entirely by factory overclocking decisions rather than any architectural difference.

The PNY GeForce RTX 5070 OC Triple Fan pulls ahead in every compute metric. Its boost clock of 2587 MHz versus the Palit GamingPro-S's 2512 MHz — a 75 MHz advantage — translates directly into higher throughput across the board: 31.79 TFLOPS of floating-point performance against 30.87 TFLOPS, a pixel rate of 207 GPixel/s vs. 201, and a texture rate of 496.7 GTexels/s vs. 482.3. In practice, these roughly 3% gains mean the PNY card can sustain slightly higher frame rates or handle heavier compute workloads before hitting its performance ceiling.

The edge in this group goes clearly to the PNY OC Triple Fan. While a ~3% performance delta is unlikely to be perceptible in most gaming scenarios, it is a real, measurable advantage derived directly from its higher factory boost clock. Buyers prioritizing raw out-of-the-box GPU throughput should lean toward the PNY; those indifferent to the marginal gap may find the Palit equally sufficient for their workloads.

The Palit GeForce RTX 5070 GamingPro-S and the PNY GeForce RTX 5070 OC Triple Fan share identical memory specifications. Both models have an effective memory speed of 28000 MHz, a maximum memory bandwidth of 672 GB/s, and 12GB of VRAM. Additionally, both products use GDDR7 memory and feature a 192-bit memory bus width. They also both support ECC memory (Error-Correcting Code) for improved reliability.

Given these identical specs, there is no difference in the memory performance between the two cards. Both models offer the same memory configuration and should provide similar performance in terms of memory handling and error correction.

The Palit GeForce RTX 5070 GamingPro-S and the PNY GeForce RTX 5070 OC Triple Fan share almost identical feature sets. Both support DirectX 12 Ultimate, OpenGL 4.6, and OpenCL 3, as well as multi-display technology, ray tracing, and 3D rendering. Both models also support DLSS and are equipped with Intel Resizable BAR, making them highly compatible with modern gaming and productivity technologies.

The key difference between the two cards is in RGB lighting. The Palit model features RGB lighting, while the PNY model does not include this feature. Both products also lack XeSS (XMX) support and have no LHR (Lite Hash Rate) limitations. Additionally, both cards support up to 4 displays.

Both the Palit GeForce RTX 5070 GamingPro-S and the PNY GeForce RTX 5070 OC Triple Fan are equipped with similar port configurations. Each card features one HDMI output, with both supporting HDMI version 2.1b. They also offer three DisplayPort outputs. Neither card has USB-C, DVI, or mini DisplayPort outputs.

Given these identical port setups, there are no significant differences between the two models in terms of connectivity options.

The Palit GeForce RTX 5070 GamingPro-S and the PNY GeForce RTX 5070 OC Triple Fan share identical specifications in several key areas. Both cards use the Blackwell GPU architecture, feature a Thermal Design Power (TDP) of 250W, and support PCI Express (PCIe) version 5. Additionally, both models are built using a 5 nm semiconductor size and have the same number of transistors, 31,100 million.

The primary differences between the two models lie in their physical dimensions. The Palit card is slightly larger, with a width of 331.9 mm and a height of 127.1 mm, while the PNY model is more compact, measuring 299.5 mm in width and 120 mm in height.

Both cards lack air-water cooling solutions, offering traditional cooling methods instead.