Xiaomi Redmi Note 14 4G (Global) VS Xiaomi Redmi Note 14S

Both phones share the same fundamental design philosophy — neither is ruggedized nor foldable — but the Xiaomi Redmi Note 14S carves out a meaningful advantage in physical form factor. It is noticeably lighter at 179 g versus 196.5 g for the Redmi Note 14 4G (Global), a difference of 17.5 g that is perceptible during extended one-handed use or long calls. The Note 14S is also slightly more compact across every dimension: narrower, shorter, and thinner at 8 mm compared to 8.2 mm, resulting in a smaller overall volume of 96.66 cm³ versus 102.57 cm³. In practice, this makes the Note 14S the more pocketable and ergonomically comfortable of the two.

The more significant differentiator in this group, however, is the IP rating. Both phones are rated water resistant, but the Note 14S holds an IP64 certification while the Note 14 4G (Global) is rated only IP54. The first digit — dust protection — is where they diverge: a rating of 6 means complete protection against dust ingress, whereas a rating of 5 means only partial protection against dust contact. For users in dusty environments or anyone concerned about long-term device reliability, this is a genuine functional advantage for the Note 14S, not merely a spec-sheet distinction.

Overall, the Redmi Note 14S holds a clear edge in this design group. It is lighter, more compact, and offers stronger environmental protection. The Note 14 4G (Global) has no compensating design advantage based on the available specs.

Both the Xiaomi Redmi Note 14 4G (Global) and the Xiaomi Redmi Note 14S feature OLED/AMOLED displays with a 6.67″ screen size, a resolution of 1080 x 2400 px, and a pixel density of 395 ppi, so their basic display specs are identical. Both models also support a 120Hz refresh rate, ensuring smooth visuals.

The key difference between the two comes in terms of brightness. The Redmi Note 14 4G (Global) offers a significantly higher typical brightness of 1800 nits, compared to the 500 nits of the Redmi Note 14S. This means the 14 4G (Global) should provide a brighter viewing experience, especially in direct sunlight.

Other than this, both devices share similar features such as Gorilla Glass 5 for damage resistance, Always-On Display functionality, and touchscreen support. However, the 14 4G (Global) supports HDR10 and HDR10+, while the 14S lacks these features. Neither model supports Dolby Vision, has a secondary screen, or offers any additional display technologies beyond what is listed.

Both the Xiaomi Redmi Note 14 4G (Global) and the Xiaomi Redmi Note 14S are equipped with the Mediatek Helio G99 chipset, 8GB of RAM, and 256GB of internal storage, offering similar performance specs. The two devices also feature the Mali G57 GPU, with a GPU clock speed of 950 MHz and a GPU turbo frequency of 2133 MHz. Additionally, both phones have the same CPU configuration, with 2 high-performance cores clocked at 2.2 GHz and 6 efficiency cores at 2 GHz, as well as 8 CPU threads and support for big.LITTLE technology.

While most of the performance specifications match, there are some minor differences in benchmark scores. The Redmi Note 14 4G (Global) achieves an AnTuTu benchmark score of 470,000, which is slightly higher than the 450,000 scored by the Redmi Note 14S. Geekbench 6 results are identical for both devices, with scores of 1979 (multi-core) and 729 (single-core). Both models also share the same thermal design power (TDP) of 5W, maximum memory bandwidth of 17.1 GB/s, and support for 64-bit processing.

Other similarities include the use of DDR4 RAM running at 4266 MHz, a 6 nm semiconductor size, and the same eMMC version 5.2. Both phones support a maximum memory amount of 12GB, although they are equipped with only 8GB of RAM. Additionally, both devices support dual displays and have integrated LTE, OpenGL ES 3.2, and OpenCL 2. The CPU temperature for both phones is also listed as 95°C, and both devices support DirectX 11 and have TrustZone security.

The Xiaomi Redmi Note 14 4G (Global) and the Xiaomi Redmi Note 14S feature multi-lens main cameras, but with different configurations. The 14 4G (Global) has a 108MP primary camera, paired with 2MP depth and macro sensors, while the 14S comes with a 200MP primary camera, an 8MP ultrawide sensor, and a 2MP macro sensor. Both phones have similar aperture settings, with the main cameras offering wide apertures of f/1.7, f/2.2, and f/2.4 across their respective lenses.

For front cameras, the 14 4G (Global) offers a 20MP camera with a wide aperture of f/2.2, while the 14S has a 16MP front camera with a slightly narrower f/2.4 aperture. Both models have standard camera features such as phase-detection autofocus for photos, continuous autofocus during video recording, and support for slow-motion video, manual exposure, manual ISO, and manual focus.

Video recording capabilities differ slightly between the two. The 14 4G (Global) supports 1080p video at 30 fps, while the 14S can record at a higher frame rate of 1080p at 60 fps. Neither model supports HDR10 or Dolby Vision video recording, and both lack a front-facing LED flash or 3D photo/video recording capabilities. They also both allow in-camera panorama creation, have a flash, and support timelapse functionality. In terms of image sensors, both phones have CMOS sensors but no BSI sensors.

The Xiaomi Redmi Note 14 4G (Global) runs Android 14, while the Xiaomi Redmi Note 14S runs Android 15, representing a difference in the Android versions. Despite this, both phones share many similar features, such as clipboard warnings, location and camera/microphone privacy options, and theme customization. They both also support dark mode, have battery health check features, and allow games to be played while downloading.

There are some notable differences between the two in terms of functionality. The 14S adds the ability to offload apps, while the 14 4G (Global) does not. Both phones have PiP (Picture-in-Picture) support, can track the current position of the device, and allow voice commands and offline voice recognition. Additionally, both devices support split screen, customizable notifications, widgets, and have a child lock feature.

Neither model supports direct OS updates, Quick Start, or Wi-Fi password sharing. The 14S runs Android 15, while the 14 4G (Global) is on Android 14, meaning that the 14S has the latest version, but both offer a similar set of privacy and customization features. Both devices are free and open-source and include various privacy and security-focused tools like manual exposure, on-device machine learning, and notification permissions.

The Xiaomi Redmi Note 14 4G (Global) and the Xiaomi Redmi Note 14S both feature rechargeable, non-removable batteries. The 14 4G (Global) has a larger 5500 mAh battery, while the 14S has a 5000 mAh battery, making the 14 4G (Global) slightly more powerful in terms of battery capacity.

Both models support fast charging, but the 14S has a faster charging speed of 67W, compared to the 33W charging speed of the 14 4G (Global). Neither phone supports wireless charging, but both come with a charger in the box and have a battery level indicator to keep track of the charge status.

Both devices have a rechargeable battery and lack removable battery features. Additionally, neither phone offers wireless charging, but both support fast charging to quickly recharge the devices when needed.

Both the Xiaomi Redmi Note 14 4G (Global) and the Xiaomi Redmi Note 14S come with a 3.5 mm audio jack, allowing for wired headphone use. Additionally, both devices feature stereo speakers, providing enhanced audio output. They also share the same audio-related features, including the inclusion of a radio, making them suitable for FM radio listening.

Neither device supports advanced Bluetooth audio codecs such as aptX, aptX HD, aptX Adaptive, or aptX Lossless, meaning both phones lack the high-definition audio streaming capabilities these codecs offer.

Overall, the audio specifications of the two phones are identical, with both supporting basic audio features like the 3.5 mm jack, stereo speakers, and FM radio, but lacking support for high-end Bluetooth audio technologies.

The Xiaomi Redmi Note 14 4G (Global) and the Xiaomi Redmi Note 14S both offer similar connectivity and feature sets. Neither phone supports 5G, but both support 2 SIM cards and have NFC. Both devices are equipped with USB Type-C ports and have Wi-Fi 4 (802.11n) and Wi-Fi 5 (802.11ac) compatibility. The 14 4G (Global) features Bluetooth version 5.3, while the 14S is slightly behind with Bluetooth version 5.2. However, both have download speeds of 650 MBits/s and upload speeds of 150 MBits/s.

Both phones have an external memory slot, a fingerprint scanner, and a gyroscope. Additionally, they both include GPS, a compass, an infrared sensor, an accelerometer, and a cellular module. Neither model supports 3D facial recognition, has an iris scanner, or includes a stylus. They also do not feature emergency SOS via satellite, crash detection, or DLNA certification, and neither includes a barometer, HDMI output, motion tracking, optical tracking, or a built-in projector.

In terms of location and tracking, both models support Galileo for positioning, and both lack support for ANT+. Additionally, both phones feature customizable features like Wi-Fi and have similar sensors, making them quite similar in terms of overall connectivity and additional features.

Both the Xiaomi Redmi Note 14 4G (Global) and the Xiaomi Redmi Note 14S come equipped with a video light, which can be useful for enhancing low-light video recording. Neither model features sapphire glass display, a curved display, or an e-paper display, meaning both phones share the same standard display characteristics in this regard.

Overall, the miscellaneous features of these two devices are identical, with both offering a video light and lacking the more advanced display types like sapphire glass or curved displays.