Anker Soundcore P30i

Name: Anker Soundcore P30i
Brand: Anker
SKU: 88342

Manufacturer: Anker

The Anker Soundcore P30i are true wireless earbuds designed for everyday use, offering a compact in-ear fit with no cables or neckband. Weighing just 10 grams per earbud, they pair a lightweight form factor with a practical feature set, including active noise cancellation, ambient sound mode, and multipoint connectivity for pairing with two devices simultaneously.

Powered by a 10 mm driver unit with a frequency range of 20 Hz to 20,000 Hz and an impedance of 16 Ohms, the P30i supports spatial audio for a more immersive listening experience. The earbuds carry an IP54 ingress protection rating, making them resistant to sweat and light splashes. Battery life reaches 10 hours on a single charge — dropping to 7 hours with ANC active — while the included charging case extends total playback to 35 hours. Charging is handled via USB Type-C, with fast charging support and a 1.5-hour full charge time. A four-microphone setup with noise cancellation handles calls, and additional features include a find-device function, mute control, voice prompts, and a travel bag in the box.

Pros

Supports active noise cancellation alongside passive noise isolation, offering two layers of sound blocking
Multipoint connection allows simultaneous pairing with two devices at once
The charging case extends total playback to 35 hours, making the earbuds practical for extended travel
Fast charging is supported, reducing downtime between uses
A four-microphone setup with noise cancellation is included for clearer hands-free calls
A travel bag is included in the box, adding convenience for portability

Cons

Wireless charging is not supported, requiring a cable every time the case needs topping up
No aptX, AAC, LDAC, or any high-resolution audio codec is available, limiting audio transmission quality
In-ear detection is absent, so music does not pause automatically when an earbud is removed
Fast pairing and NFC pairing are not supported, making the initial connection process more manual
Battery life drops noticeably from 10 hours to 7 hours when ANC is active

Who is this for?

The Soundcore P30i suits users who want a wire-free, low-fuss listening experience for everyday activities such as commuting, working out, or working from home. The combination of active noise cancellation and passive noise isolation makes them a reasonable fit for moderately noisy environments where blocking ambient sound matters. With an IP54 sweat-resistance rating and a lightweight 10-gram build, they also work well for fitness and active use. The 35-hour total battery life with the case and multipoint connectivity for two devices make them practical for users who switch frequently between a phone and a laptop throughout the day.

Who is this NOT for?

Users who prioritize high-fidelity audio transmission will find the P30i lacking, as it supports neither LDAC, AAC, nor any aptX codec variant, limiting the quality of the wireless audio stream. Audiophiles or those who rely on lossless or high-resolution wireless audio should look elsewhere. The absence of in-ear detection means the earbuds will not automatically pause playback when removed, which can be frustrating for users who frequently take them in and out. Additionally, those who prefer the convenience of wireless charging for their case will find the wired-only charging setup a limitation in a cord-free workflow.

Design:

Fit	In-ear
Ingress Protection (IP) rating	IP54
water resistance	Sweat resistant
weight	10 g
has no wires or cables	✓
are neckband earbuds	✕
wingtips included	✕
has RGB lighting	✕
has stereo speakers	✓
has UV light	✕
Has a display	✕

The Anker Soundcore P30i use an in-ear fit and are fully wire-free, with no neckband or wingtips included. Each earbud weighs 10 grams and delivers stereo sound without any RGB lighting, UV light, or display. For durability, they carry an IP54 rating, which means they are protected against sweat and light moisture exposure — making them suitable for workouts and daily commutes alike.

Sound quality:

has active noise cancellation (ANC)	✓
has passive noise reduction	✓
driver unit size	10 mm
lowest frequency	20 Hz
highest frequency	20000 Hz
supports spatial audio	✓
has Dolby Atmos	✕
has Dirac Virtuo	✕
impedance	16 Ohms
has a neodymium magnet	✕

The Soundcore P30i uses a 10 mm driver unit with a frequency range spanning 20 Hz to 20,000 Hz and an impedance of 16 Ohms. It supports both active noise cancellation and passive noise reduction, helping to block out unwanted ambient sound in different listening environments. Spatial audio is also supported, adding a wider sense of soundstage to compatible content. Dolby Atmos, Dirac Virtuo, and a neodymium magnet are not part of the specification.

Power:

Battery life	10 hours
Battery life of charging case	35 hours
Battery life (ANC)	7 hours
charge time	1.5 hours
has wireless charging	✕
Has a solar power battery	✕
has a battery level indicator	✓
has a rechargeable battery	✓

The Soundcore P30i offers 10 hours of battery life per charge, which drops to 7 hours when active noise cancellation is in use. The included charging case extends total playback to 35 hours, and a full charge takes 1.5 hours via the rechargeable battery. A battery level indicator is present to help track remaining charge. Wireless charging and solar power are not supported.

Connectivity:

has fast pairing	✕
Has USB Type-C	✓
Bluetooth version	5.4
has LDAC	✕
has LDHC	✕
has Bluetooth LE Audio	✕
has aptX Adaptive	✕
has aptX Low Latency	✕
has aptX HD	✕
has aptX	✕
has aptX Lossless	✕
has aptX Voice	✕
has Auracast	✕
maximum Bluetooth range	10 m
supports Bluetooth pairing using NFC	✕
Can be used wirelessly	✓
has AAC	✕

The Soundcore P30i connects wirelessly via Bluetooth 5.4 with a maximum range of 10 meters, and charges through a USB Type-C port. It does not support fast pairing, NFC pairing, AAC, LDAC, LDHC, Auracast, or any variant of aptX — including aptX, aptX HD, aptX Adaptive, aptX Low Latency, aptX Lossless, and aptX Voice. Bluetooth LE Audio is also not supported.

Features:

has ambient sound mode	✓
has in/on-ear detection	✕
has find device feature	✓
Supports fast charging	✓
multipoint count	2
can read notifications	✕
has a mute function	✓
can be used as a headset	✓
control panel placed on a device	✓
Has voice prompts	✓
travel bag is included	✓
Has an in-line control panel	✕
Has a temperature sensor	✕

The Soundcore P30i includes a practical set of features for daily use, with ambient sound mode, a mute function, voice prompts, and a find-device feature all present. It supports multipoint connection for up to two devices simultaneously and can be used as a headset for calls. Controls are handled via a panel on the earbuds themselves rather than an in-line remote, and fast charging is supported. A travel bag is included in the box. In-ear detection, notification reading, and a body temperature sensor are not available on this model.

Microphone:

number of microphones	4
has a noise-canceling microphone	✓

The Soundcore P30i is equipped with four microphones alongside a noise-canceling microphone, helping to reduce background interference during calls and voice interactions.

Final Verdict

The Anker Soundcore P30i is a capable set of true wireless earbuds that covers the essentials well — particularly for users who want reliable noise cancellation, a sweat-resistant build, and enough battery headroom for full days of use. Its 35-hour combined battery life with the charging case, alongside fast charging support and a four-microphone noise-canceling setup, gives it a solid practical edge for commuters and active users. That said, the absence of any high-resolution audio codec and the lack of wireless case charging signal that this product is positioned for everyday convenience rather than audiophile-grade performance. For users whose priorities align with those strengths, the P30i delivers a well-rounded feature set in a lightweight, wire-free form factor.