TurboVS
Artillery Sidewinder X4 Plus specifications and in-depth review

Artillery Sidewinder X4 Plus

Manufacturer: Artillery

The Artillery Sidewinder X4 Plus is an FDM 3D printer built around a large build envelope and a feature set aimed at users who want a capable desktop machine without extensive manual setup. It comes with a 4.3-inch touchscreen, automatic bed leveling, and support for remote smartphone control over Wi-Fi, making day-to-day operation relatively accessible. One of its more notable specifications is its 500 mm/s maximum print speed, which places it among faster machines in its category. It requires assembly before first use and draws up to 450W during operation.

The printer uses 1.75mm filament and a 0.4 mm nozzle, and it is compatible with PLA, ABS, PET, and PETG materials, giving users a reasonable range of thermoplastic options. The maximum build size of 300 x 300 x 400mm offers a generous print area, particularly in the vertical dimension, which suits taller models. A heated build platform is included to help with adhesion and warping across different materials. Connectivity options include one USB port, one RJ45 port, and Wi-Fi, while power loss recovery allows print jobs to resume after an unexpected shutdown. The printer operates within a temperature range of 10 °C to 30 °C.

Pros
  • Maximum print speed of 500 mm/s allows for significantly faster job completion compared to slower operational settings
  • Large build volume of 300 x 300 x 400mm accommodates tall and wide prints without needing to split models
  • Supports four filament types — PLA, ABS, PET, and PETG — covering a practical range of common thermoplastics
  • Automatic bed leveling reduces manual calibration effort before each print
  • Power loss recovery allows interrupted print jobs to resume rather than restart from the beginning
  • Wi-Fi connectivity combined with remote smartphone support enables print monitoring and control without physical presence at the machine
Cons
  • Does not automatically generate support structures, requiring users to configure them manually in slicing software
  • Not pre-assembled, so setup work is required before the printer can be used
  • No external memory slot available, limiting file transfer options to USB or network-based methods
  • Operating temperature is restricted to a range of 10 °C to 30 °C, which may be limiting in colder or warmer environments
  • At 450W operating power consumption, energy draw during extended print sessions is relatively high
Who is this for?

The Artillery Sidewinder X4 Plus is well-suited for users who regularly print large or tall models, thanks to its 300 x 300 x 400mm build volume that accommodates substantial prints in a single run. The combination of Wi-Fi connectivity, remote smartphone support, and automatic bed leveling makes it a practical choice for users who want a more streamlined workflow with less hands-on calibration. Support for PLA, ABS, PET, and PETG also makes it a reasonable fit for makers who work across multiple material types and need a machine that can handle varying filament requirements without switching setups.

Who is this NOT for?

Users who rely on automatic support structure generation within the printer itself will find this machine lacking, as that capability is absent and support configuration must be handled externally through slicing software. The requirement for assembly before first use makes it a poor fit for those expecting an out-of-the-box ready experience, and the operating temperature restriction of 10 °C to 30 °C means it is not suitable for use in unheated workshops, garages, or environments prone to temperature extremes. Its 450W power draw may also be a practical concern for users working in settings with limited electrical capacity or those running extended print sessions continuously.

General info:

weight 1550 g
Uses fused deposition modeling (FDM) ✓
Uses stereolithography (SLA) ✕
Uses selective laser sintering (SLS) ✕
height 680 mm
width 490 mm
thickness 510 mm
volume 169932 cm³
maximum operating temperature 30 °C
lowest potential operating temperature 10 °C

The Artillery Sidewinder X4 Plus uses fused deposition modeling (FDM) as its printing technology and does not support SLA or SLS methods. It weighs 1550 g and measures 680 mm tall, 490 mm wide, and 510 mm deep, giving it a total volume of 169932 cm³. The printer is designed to operate within an ambient temperature range of 10 °C to 30 °C, which should be taken into account when choosing an installation environment.

Components:

Creates support structures ✕
Has a heated build platform ✓
1.75mm filament diameter ✓
nozzle size 0.4 mm
3D print speed 500 mm/s

The printer is equipped with a heated build platform, which aids adhesion and helps reduce warping when working with temperature-sensitive materials. It uses standard 1.75mm filament and a 0.4 mm nozzle, a widely adopted combination that offers good compatibility with commonly available filament spools. The maximum print speed reaches 500 mm/s, allowing for faster job completion when conditions allow. Notably, the printer does not automatically generate support structures, so users will need to handle support configuration manually through their slicing software.

Materials:

prints with PET ✓
Prints in PLA ✓
Prints in ABS plastic ✓

The Artillery Sidewinder X4 Plus supports three filament materials: PLA, ABS, and PET. This selection covers a practical range of common thermoplastics, from PLA which is straightforward to print, to ABS which requires more controlled conditions, to PET which offers a balance of strength and ease of use. Having heated bed support aligns well with the inclusion of ABS and PET, both of which generally benefit from a warmed build surface.

Print sizes:

maximum creation size 300 x 300 x 400mm

The Artillery Sidewinder X4 Plus offers a maximum build volume of 300 x 300 x 400mm, providing a broad footprint and notable vertical height that accommodates taller prints without requiring the model to be split into multiple parts. The 400mm z-axis in particular gives users meaningful flexibility when printing elongated or upright objects in a single run.

Connectivity:

supports a remote smartphone ✓
has an external memory slot ✕
USB ports 1
RJ45 ports 1
supports Wi-Fi ✓

The Artillery Sidewinder X4 Plus connects via Wi-Fi and supports remote smartphone control, allowing users to manage print jobs without being physically present at the machine. For wired connectivity, it includes one USB port and one RJ45 Ethernet port, offering a reliable local network option alongside the wireless connection. There is no external memory slot, so file transfers rely entirely on the available wired or wireless interfaces.

Features:

Has a display ✓
screen size 4.3"
has a touch screen ✓
bed levelling Automatic bed leveling
has power loss recovery ✓
Is pre-assembled ✕
operating power consumption 450W

The Artillery Sidewinder X4 Plus features a 4.3-inch touchscreen for direct on-device control, removing the need for physical buttons or external input devices during operation. It includes automatic bed leveling, which simplifies the setup process before each print, and power loss recovery, which allows an interrupted print job to resume from where it stopped rather than starting over. The printer draws 450W during operation and is not pre-assembled, meaning some setup work is required before first use.

Miscellaneous:

prints with PETG ✓

The Artillery Sidewinder X4 Plus supports printing with PETG, adding this widely used filament type to its overall material compatibility. PETG is noted for combining reasonable ease of printing with decent mechanical resilience, making its inclusion a practical addition to the printer's supported material range.

Final Verdict

The Artillery Sidewinder X4 Plus is a capable FDM 3D printer that stands out for its generous 300 x 300 x 400mm build volume and 500 mm/s maximum print speed, making it a solid option for users who prioritize output size and throughput in their workflow. Multi-material support across PLA, ABS, PET, and PETG, combined with automatic bed leveling and Wi-Fi-based remote control, rounds out a feature set that suits makers with varied and recurring printing needs. That said, it demands some tolerance for initial assembly, manual support configuration, and attention to operating environment conditions. For users whose requirements align with its strengths, the Sidewinder X4 Plus delivers a technically well-equipped platform that covers the essentials without unnecessary compromise.

Popular Comparisons

Artillery Sidewinder X4 Plus
Artillery Sidewinder X4 Plus
VS
Anycubic Kobra 2
Anycubic Kobra 2
Artillery Sidewinder X4 Plus
Artillery Sidewinder X4 Plus
VS
Elegoo Neptune 4
Elegoo Neptune 4