Asus ProArt X870E-Creator WiFi

Name: Asus ProArt X870E-Creator WiFi
Brand: Asus
SKU: 7323

Manufacturer: Asus

The Asus ProArt X870E-Creator WiFi is an ATX-form-factor motherboard built around AMD's AM5 platform and the X870 chipset. Designed with content creation and demanding workloads in mind, it supports Wi-Fi 7 (802.11be) alongside Bluetooth 5.4, and includes an HDMI 2.1 output as well as a DisplayPort output for display connectivity. RGB lighting and a clear CMOS button are also present, and the board carries a three-year warranty.

On the memory side, the board accommodates up to 192GB of DDR5 across four slots in a dual-channel configuration, with overclocked speeds reaching 8000 MHz. Connectivity is extensive, with two USB 4 40Gbps ports, two Thunderbolt 4 ports, seven USB 3.2 Gen 2 Type-A ports, and two RJ45 network jacks. Storage options include four M.2 sockets and four SATA 3 connectors, with full RAID 0, 1, 5, and 10 support. Expansion is handled by two PCIe 5.0 x16 slots and one PCIe 4.0 x16 slot, while the onboard audio section delivers a 120 dB signal-to-noise ratio with 7.1-channel output.

Pros

Four M.2 sockets provide ample high-speed storage expansion without relying on slower SATA connections
Two USB 4 40Gbps ports paired with two Thunderbolt 4 ports make for a notably versatile high-bandwidth rear I/O selection
Wi-Fi 7 support ensures the integrated wireless module is ready for the latest networking standards
DDR5 memory is supported up to 192GB across four slots, accommodating very large memory configurations
Seven fan headers give good flexibility for building comprehensive cooling setups
RAID 0, 1, 5, and 10 support offers meaningful storage redundancy and performance options for different use cases

Cons

No ECC memory support limits the board's suitability for workloads where memory error correction is important
Dual BIOS is absent, meaning there is no automatic fallback if a BIOS update fails
No S/PDIF output restricts digital audio passthrough options for users relying on external audio equipment
Only four SATA 3 connectors are available, which may be limiting for builds that rely heavily on traditional hard drives or SATA SSDs
A single USB 2.0 rear port is the only non-USB 3.x Type-A option, which could be restrictive for legacy peripherals

Who is this for?

This board is well suited to users building high-throughput workstations or content creation rigs that demand substantial connectivity and storage bandwidth. The combination of four M.2 sockets, two PCIe 5.0 x16 slots, and two USB 4 40Gbps ports with Thunderbolt 4 makes it a strong fit for professionals working with fast external storage, high-bandwidth peripherals, or multi-GPU setups. The support for up to 192GB of DDR5 memory also makes it appropriate for memory-intensive tasks such as large-scale video editing, 3D rendering, or data processing, while the broad RAID support adds appeal for users who need flexible, redundant storage configurations. Those who want cutting-edge wireless connectivity will also benefit from the integrated Wi-Fi 7 module.

Who is this NOT for?

This board is not a good fit for users who require ECC memory support, such as those running server workloads, scientific computing environments, or applications where memory error correction is critical to data integrity. The absence of dual BIOS also makes it less appropriate for users who frequently experiment with BIOS updates and want an automatic recovery option if something goes wrong. Additionally, builds that depend heavily on legacy connectivity — such as numerous SATA drives, PS/2 peripherals, or S/PDIF digital audio output — will find the available options limited, making this board a poor match for scenarios rooted in older hardware ecosystems.

General info:

CPU socket	AM5
chipset	X870
form factor	ATX
supports Wi-Fi	✓
Wi-Fi version	Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax), Wi-Fi 6E (802.11ax), Wi-Fi 7 (802.11be)
Has Bluetooth	✓
Bluetooth version	5.4
HDMI version	HDMI 2.1
Easy to overclock	✓
has RGB lighting	✓
Easy to reset BIOS	✓
Has dual BIOS	✕
has aptX	✕
CPU sockets	1
Has integrated graphics	✕
warranty period	3 years
height	244 mm
width	305 mm
Has integrated CPU	✕

The Asus ProArt X870E-Creator WiFi is built around the AM5 socket and is compatible with the X870 chipset, arriving in the standard ATX form factor at 305 × 244 mm. It supports wireless connectivity through an integrated Wi-Fi module covering Wi-Fi 4, 5, 6, 6E, and Wi-Fi 7 (802.11be), paired with Bluetooth 5.4, though aptX is not included. Video output is handled via an HDMI 2.1 port, while overclocking is supported directly from the board. RGB lighting is present, and a clear CMOS button makes BIOS resets straightforward; however, the board does not feature dual BIOS. There is a single CPU socket, no integrated graphics or integrated CPU, and the unit is backed by a three-year warranty.

Memory:

maximum memory amount	192GB
overclocked RAM speed	8000 MHz
memory slots	4
DDR memory version	5
memory channels	2
Supports ECC memory	✕

This board supports DDR5 memory across four slots arranged in a dual-channel configuration, with a maximum capacity of 192GB. Overclocked RAM speeds can reach up to 8000 MHz, offering headroom for high-frequency memory kits. ECC memory is not supported.

Ports:

USB 3.2 Gen 2 ports (USB-A)	7
USB 3.2 Gen 1 ports (USB-A)	0
USB 3.2 Gen 2 ports (USB-C)	0
USB 3.2 Gen 1 ports (USB-C)	0
USB 2.0 ports	1
USB 3.2 Gen 2x2 ports	1
USB 4 40Gbps ports	2
USB 4 20Gbps ports	0
Thunderbolt 4 ports	2
Thunderbolt 3 ports	0
has an HDMI output	✓
DisplayPort outputs	1
RJ45 ports	2
Has USB Type-C	✓
eSATA ports	0
DVI outputs	0
has a VGA connector	✕
PS/2 ports	0

The rear I/O offers a broad range of USB connectivity, led by two USB 4 40Gbps ports and two Thunderbolt 4 ports, alongside seven USB 3.2 Gen 2 Type-A ports, one USB 3.2 Gen 2x2 port, and a single USB 2.0 port; USB Type-C is present, while there are no USB 3.2 Gen 1 ports, no USB 4 20Gbps ports, and no Thunderbolt 3 ports. Display outputs consist of one HDMI and one DisplayPort, with no DVI or VGA connectors available. Network connectivity is covered by two RJ45 ports, and there are no eSATA or PS/2 ports.

Connectors:

USB 3.2 Gen 1 ports (through expansion)	2
USB 3.2 Gen 2x2 ports (through expansion)	1
USB 2.0 ports (through expansion)	6
SATA 3 connectors	4
fan headers	7
USB 3.0 ports (through expansion)	2
M.2 sockets	4
Has TPM connector	✕
U.2 sockets	0
Has mSATA connector	✕
SATA 2 connectors	0

Internal expansion is well catered for, with four M.2 sockets and four SATA 3 connectors available for storage; there are no SATA 2, U.2, or mSATA connectors. USB headers allow for additional ports via expansion brackets, including two USB 3.2 Gen 1 headers, two USB 3.0 headers, one USB 3.2 Gen 2x2 header, and six USB 2.0 headers. Cooling is supported by seven fan headers, while a TPM connector is not present on this board.

Expansion slots:

PCIe 4.0 x16 slots	1
PCIe 5.0 x16 slots	2
PCIe 3.0 x16 slots	0
PCIe x1 slots	0
PCI slots	0
PCIe 2.0 x16 slots	0
PCIe x4 slots	0
PCIe x8 slots	0

The board provides three full-length expansion slots in total: two PCIe 5.0 x16 slots and one PCIe 4.0 x16 slot. There are no PCIe 3.0, PCIe 2.0, PCIe x8, PCIe x4, or PCIe x1 slots, and no legacy PCI slots are present.

Audio:

Signal-to-Noise ratio (DAC)	120 dB
audio channels	7.1
Has S/PDIF Out port	✕
audio connectors	3

The onboard audio supports 7.1-channel output and delivers a DAC signal-to-noise ratio of 120 dB, with three analog audio connectors available on the rear panel. An S/PDIF Out port is not included.

Storage:

Supports RAID 1	✓
Supports RAID 10 (1+0)	✓
Supports RAID 5	✓
Supports RAID 0	✓
Supports RAID 0+1	✕

The board supports RAID 0, 1, 5, and 10 (1+0) configurations, covering a range of needs from performance striping to redundancy and combined setups. RAID 0+1 is not supported.

Final Verdict

The Asus ProArt X870E-Creator WiFi is a feature-dense ATX motherboard that makes a compelling case for demanding AM5 builds where connectivity breadth and storage flexibility are priorities. Its combination of four M.2 sockets, two PCIe 5.0 x16 slots, and two Thunderbolt 4 ports alongside USB 4 40Gbps reflects a clear focus on high-bandwidth workflows, and the support for up to 192GB of DDR5 memory at overclocked speeds reinforces its orientation toward content creation and data-intensive environments. The integrated Wi-Fi 7 module and broad RAID support round out a specification sheet that leaves little to be desired in terms of modern connectivity. Where it falls short — notably the absence of ECC memory support, dual BIOS, and S/PDIF output — these omissions are unlikely to concern its intended audience. For professionals building a capable AM5 workstation who need versatile I/O and future-ready expansion, this board represents a well-considered option.