Asus TUF Gaming Z890-Pro WiFi

Name: Asus TUF Gaming Z890-Pro WiFi
Brand: Asus
SKU: 68291

Manufacturer: Asus

The Asus TUF Gaming Z890-Pro WiFi is an ATX-form-factor motherboard designed around Intel's LGA 1851 platform and the Z890 chipset. It supports overclocking out of the box and includes Wi-Fi 7 (802.11be) alongside Bluetooth 5.4, making wireless connectivity a core part of its feature set. RGB lighting and a dual BIOS round out the general feature list, and the board carries a three-year warranty.

On the memory side, the board provides four DDR5 slots across two channels, with support for up to 192 GB and overclocked speeds reaching 9066 MHz. Storage options include four M.2 sockets and four SATA 3 connectors, with full RAID 0, 1, 5, and 10 support. The rear panel offers six USB 3.2 Gen 2 Type-A ports, two USB 4 40 Gbps ports, and two Thunderbolt 4 ports, alongside HDMI 2.1 and one DisplayPort output. Expansion slots consist of one PCIe 5.0 x16, one PCIe 4.0 x16, two PCIe x1, and one PCIe x4 slot, while the onboard audio delivers a 7.1-channel setup with a 120 dB signal-to-noise ratio and S/PDIF output.

Pros

Supports Wi-Fi 7 alongside all previous Wi-Fi generations down to Wi-Fi 4, ensuring broad wireless compatibility
Four M.2 sockets provide ample high-speed storage connectivity without relying solely on SATA ports
Two Thunderbolt 4 ports and two USB 4 40Gbps ports offer fast and versatile high-bandwidth device connections
DDR5 memory can be overclocked up to 9066 MHz across four slots with a maximum capacity of 192 GB
Dual BIOS adds a layer of firmware redundancy, reducing the risk of being left with an unbootable system after a failed update
Onboard audio delivers a 7.1-channel setup with a 120 dB signal-to-noise ratio and an S/PDIF Out port for digital passthrough

Cons

No USB 3.2 Gen 1, USB 2.0, or USB-C ports at the USB 3.2 level on the rear panel, limiting compatibility with older peripherals
ECC memory is not supported, which rules this board out for workloads requiring error-correcting RAM
No easy CMOS reset mechanism, making BIOS recovery less straightforward if a setting causes instability
Only a single RJ45 port is provided, with no option for a secondary wired network connection
RAID 0+1 is not supported, slightly narrowing the range of available storage redundancy configurations

Who is this for?

This board is well-suited to enthusiast desktop builders targeting Intel's LGA 1851 platform who want room to grow in terms of storage and connectivity. With four M.2 sockets, PCIe 5.0 support, and DDR5 memory overclocking up to 9066 MHz, it fits builders who intend to push system performance and need a platform that can keep pace. The inclusion of Wi-Fi 7, two Thunderbolt 4 ports, and two USB 4 40Gbps ports also makes it a strong fit for users who rely on high-speed peripherals and wireless connectivity as part of their daily workflow.

Who is this NOT for?

Users who require ECC memory support for error-sensitive workloads — such as those in data processing, scientific computing, or professional content validation — will find this board unsuitable, as that feature is absent. It is also a poor fit for anyone needing a secondary wired network connection or legacy interface support, since there is only one RJ45 port and no USB 2.0, DVI, or VGA outputs on the rear panel. Additionally, builders or administrators who prioritize straightforward BIOS recovery via a physical CMOS reset button may find the lack of that feature inconvenient in troubleshooting scenarios.

General info:

CPU socket	LGA 1851
chipset	Z890
form factor	ATX
supports Wi-Fi	✓
Wi-Fi version	Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax), Wi-Fi 6E (802.11ax), Wi-Fi 7 (802.11be)
Has Bluetooth	✓
Bluetooth version	5.4
HDMI version	HDMI 2.1
Easy to overclock	✓
has RGB lighting	✓
Easy to reset BIOS	✕
Has dual BIOS	✓
has aptX	✕
CPU sockets	1
Has integrated graphics	✕
warranty period	3 years
height	244 mm
width	305 mm
Has integrated CPU	✕

The Asus TUF Gaming Z890-Pro WiFi is an ATX motherboard measuring 305 × 244 mm, built around a single LGA 1851 socket and compatible with the Z890 chipset. It supports overclocking and includes a dual BIOS for added firmware reliability, though it does not offer an easy CMOS reset button. Wireless connectivity spans Wi-Fi 4 through Wi-Fi 7 (802.11be), complemented by Bluetooth 5.4, though aptX audio over Bluetooth is not supported. The board features RGB lighting and an HDMI 2.1 output, while it does not include integrated graphics or an integrated CPU. There is no support for ECC or non-standard memory configurations tied to this section, and the board carries a three-year warranty.

Memory:

maximum memory amount	192GB
overclocked RAM speed	9066 MHz
memory slots	4
DDR memory version	5
memory channels	2
Supports ECC memory	✕

This motherboard supports DDR5 memory across four slots arranged in a dual-channel configuration, with a maximum capacity of 192 GB. For users who want to push performance further, overclocked RAM speeds of up to 9066 MHz are supported. ECC memory, however, is not supported on this board.

Ports:

USB 3.2 Gen 2 ports (USB-A)	6
USB 3.2 Gen 1 ports (USB-A)	0
USB 3.2 Gen 2 ports (USB-C)	0
USB 3.2 Gen 1 ports (USB-C)	0
USB 2.0 ports	0
USB 3.2 Gen 2x2 ports	0
USB 4 40Gbps ports	2
USB 4 20Gbps ports	0
Thunderbolt 4 ports	2
Thunderbolt 3 ports	0
has an HDMI output	✓
DisplayPort outputs	1
RJ45 ports	1
Has USB Type-C	✓
eSATA ports	0
DVI outputs	0
has a VGA connector	✕
PS/2 ports	0

The rear panel offers a well-rounded set of ports built around modern connectivity standards. USB coverage consists of six USB 3.2 Gen 2 Type-A ports, alongside two USB 4 40Gbps ports and two Thunderbolt 4 ports, all presented in Type-C form factor — there are no USB 3.2 Gen 1, USB 2.0, USB 3.2 Gen 2x2, or USB 4 20Gbps ports included. Display output is handled by one HDMI and one DisplayPort connector, with no DVI or VGA options present. Networking is covered by a single RJ45 port, and there are no eSATA or PS/2 ports on this board.

Connectors:

USB 3.2 Gen 1 ports (through expansion)	2
USB 2.0 ports (through expansion)	4
SATA 3 connectors	4
fan headers	6
USB 3.0 ports (through expansion)	2
M.2 sockets	4
Has TPM connector	✕
U.2 sockets	0
Has mSATA connector	✕
SATA 2 connectors	0

Internal connectivity on this board is fairly comprehensive for storage and expansion needs. There are four M.2 sockets and four SATA 3 connectors for storage devices, while SATA 2, U.2, and mSATA are not supported. For additional USB expansion via headers, the board provides two USB 3.2 Gen 1 connectors, two USB 3.0 connectors, and four USB 2.0 connectors. Cooling is addressed through six fan headers, though a TPM connector is absent from this board.

Expansion slots:

PCIe 4.0 x16 slots	1
PCIe 5.0 x16 slots	1
PCIe 3.0 x16 slots	0
PCIe x1 slots	2
PCI slots	0
PCIe 2.0 x16 slots	0
PCIe x4 slots	1
PCIe x8 slots	0

The board's expansion layout includes one PCIe 5.0 x16 slot and one PCIe 4.0 x16 slot for high-bandwidth add-in cards, along with two PCIe x1 slots and one PCIe x4 slot for additional peripherals. There are no PCIe 3.0 x16, PCIe 2.0 x16, PCIe x8, or legacy PCI slots present on this board.

Audio:

Signal-to-Noise ratio (DAC)	120 dB
audio channels	7.1
Has S/PDIF Out port	✓
audio connectors	5

The onboard audio supports a 7.1-channel configuration and delivers a DAC signal-to-noise ratio of 120 dB, indicating a clean audio output signal. Five audio connectors are available for connecting speakers, headsets, and microphones, and an S/PDIF Out port is included for digital audio passthrough to external receivers or DACs.

Storage:

Supports RAID 1	✓
Supports RAID 10 (1+0)	✓
Supports RAID 5	✓
Supports RAID 0	✓
Supports RAID 0+1	✕

The board supports a solid range of RAID configurations, including RAID 0, RAID 1, RAID 5, and RAID 10 (1+0), covering common use cases from performance striping to fault-tolerant mirroring. RAID 0+1, however, is not supported.

Final Verdict

The Asus TUF Gaming Z890-Pro WiFi is a feature-rich ATX motherboard that covers most of what a serious enthusiast builder would want from the LGA 1851 platform. Its combination of Wi-Fi 7, Thunderbolt 4, USB 4 40Gbps connectivity, and DDR5 support with overclocking headroom up to 9066 MHz makes it a well-equipped board for users who prioritize both raw performance and modern peripheral support. The four M.2 sockets and broad RAID support add practical storage flexibility, while the dual BIOS and three-year warranty offer a degree of long-term reliability. That said, the absence of ECC memory support and limited legacy port options mean it is best matched to enthusiast desktop use rather than workstation or professional server environments. For builders targeting a high-connectivity, performance-oriented Intel platform build, this board presents a compelling and thorough specification sheet.