ATK Mercury M1

Manufacturer: ATK

The ATK Mercury, also known as the ATK Mercury M1, is an over-ear gaming headset built for extended sessions across multiple platforms. It features RGB lighting and a closed-back design with passive noise reduction, giving it a look and feel suited to a dedicated gaming setup. The headset is compatible with PlayStation, PC, and Nintendo Switch, making it versatile across common gaming environments. One of its more notable attributes is its 60-hour battery life, supported by a 1200 mAh rechargeable battery — a figure that sets a high bar for wireless endurance in its category.

The ATK Mercury connects via Bluetooth, 2.4 GHz wireless, 3.5 mm, and USB, offering flexibility depending on the platform and use case. It uses 50 mm neodymium magnet drivers with an impedance of 32 Ohms and a sound pressure level of 118 dB/mW, alongside virtual surround sound and spatial audio support. The frequency response covers the standard 20 Hz to 20,000 Hz range, and two drivers handle stereo output. A noise-canceling microphone with a mute function is built in, and the cable is detachable and connects via USB Type-C. Controls are managed through an on-device panel, and the headset weighs 360 g with a maximum Bluetooth range of 10 meters.

Pros

60-hour battery life on a single charge allows for extended gaming sessions without frequent recharging
Four connection modes — Bluetooth, 2.4 GHz wireless, 3.5 mm, and USB — provide broad flexibility across different setups
Compatible with PlayStation, PC, and Nintendo Switch, covering multiple gaming platforms without requiring separate adapters
Virtual surround sound and spatial audio support are directly relevant for gaming, where positional awareness can matter
The detachable cable adds convenience and reduces the risk of permanent damage from cable wear
A noise-canceling microphone with a dedicated mute function makes it practical for online multiplayer and voice communication

Cons

At 360 g, the headset is on the heavier side, which may cause discomfort during very long sessions
The headset cannot be folded, making it less compact and harder to store or transport
No travel bag is included, leaving users without a dedicated carrying solution
Active noise cancellation is absent, so noise isolation relies entirely on the passive closed-back design
The microphone is not removable, which limits flexibility for users who may prefer a separate mic setup

Who is this for?

The ATK Mercury is well suited to dedicated PC and console gamers who spend long hours at a desk, where its 60-hour battery life and multi-platform compatibility with PlayStation, PC, and Nintendo Switch remove the need for constant recharging or cable management. The virtual surround sound and spatial audio support make it a practical choice for players where directional audio plays a role in gameplay. Users who communicate frequently online will also appreciate the built-in noise-canceling microphone with mute function, which handles voice chat without requiring an external mic.

Who is this NOT for?

Users looking for a portable or travel-friendly headset will find the ATK Mercury lacking — it cannot be folded, no travel bag is included, and at 360 g it is not particularly lightweight for on-the-go use. Those who need strong isolation in loud environments may also be underwhelmed, as there is no active noise cancellation and the headset relies solely on passive isolation through its closed-back design. Additionally, users who prefer a clean, minimalist aesthetic may not appreciate the RGB lighting, which is not adjustable based on the available data.

Design:

Fit	Over-ear
has a detachable cable	✓
weight	360 g
has RGB lighting	✓
can be folded	✕
has an open-back design	✕
has a tangle free cable	✕
has stereo speakers	✓

The ATK Mercury uses an over-ear fit and a closed-back design, which contributes to its passive noise isolation. It weighs 360 g and features RGB lighting, giving it a visual profile typical of gaming-oriented hardware. The cable is detachable, though it is not tangle-free. The headset cannot be folded for storage or travel, and no wingtips or foldable mechanisms are present. Stereo speakers are built into both earcups, covering left and right channel output.

Sound quality:

lowest frequency	20 Hz
highest frequency	20000 Hz
has active noise cancellation (ANC)	✕
Surround sound	Virtual
supports spatial audio	✓
driver unit size	50 mm
sound pressure level	118 dB/mW
impedance	32 Ohms
has a neodymium magnet	✓
has passive noise reduction	✓
drivers count	2

The ATK Mercury is equipped with two 50 mm neodymium magnet drivers, one per earcup, covering a frequency range of 20 Hz to 20,000 Hz. It delivers a sound pressure level of 118 dB/mW at an impedance of 32 Ohms. Active noise cancellation is not present, but the closed-back design provides passive noise reduction. On the spatial side, the headset supports virtual surround sound and spatial audio, which are particularly relevant for gaming use cases where positional audio awareness matters.

Microphone:

has a noise-canceling microphone	✓
has a removable microphone	✕
has a mute function	✓
number of microphones	1

The ATK Mercury includes a single built-in microphone with noise cancellation, designed to reduce background sounds during voice communication. A mute function is also available, allowing quick silencing of the mic when needed. The microphone is not removable, so it remains fixed to the headset at all times.

Power:

Battery life	60 hours
battery power	1200 mAh
has a rechargeable battery	✓
has a battery level indicator	✓
has a removable battery	✕

The ATK Mercury is powered by a built-in 1200 mAh rechargeable battery, rated for up to 60 hours of battery life per charge — a substantial figure for a wireless gaming headset. A battery level indicator is included, so users can monitor remaining charge without guesswork. The battery is not removable, meaning it cannot be swapped out and must be recharged in place.

Connectivity:

connectivity	Bluetooth, 2.4GHz wireless, 3.5mm, USB
compatibility	PlayStation, PC, Nintendo Switch
Can be used wirelessly	✓
Has USB Type-C	✓
maximum Bluetooth range	10 m

The ATK Mercury supports four connection modes — Bluetooth, 2.4 GHz wireless, 3.5 mm analog, and USB — giving users flexibility depending on their setup and platform. It is compatible with PlayStation, PC, and Nintendo Switch, covering a broad range of common gaming environments. The USB connection uses a Type-C port, and the maximum Bluetooth range extends to 10 meters.

Features:

control panel placed on a device	✓
can be used as a headset	✓
has a vibration function	✕
Has an in-line control panel	✕
warranty period	1 years
travel bag is included	✕

The ATK Mercury can be used as a headset for voice communication, with controls accessible through an on-device control panel. There is no in-line control panel on the cable, and the headset does not include a vibration function. A travel bag is not included in the box. The headset comes with a 1-year warranty.

Final Verdict

The ATK Mercury is a multi-platform gaming headset that makes a strong case for desk-bound gamers who value endurance and versatility above all else. Its 60-hour battery life paired with four connection modes — Bluetooth, 2.4 GHz, USB, and 3.5 mm — gives it a level of flexibility that suits users across PlayStation, PC, and Nintendo Switch without compromise. The virtual surround sound, spatial audio support, and noise-canceling microphone round out a feature set that is clearly oriented toward long gaming sessions and online communication. Where it falls short — the lack of active noise cancellation, a non-foldable build, and a 360 g weight — signals that this is a headset designed to stay on a desk rather than travel with its user. For stationary gamers who prioritize battery endurance and platform flexibility, the ATK Mercury delivers a well-rounded and capable package.

Categories