TurboVS
Audio-Technica ATH-ADX3000 specifications and in-depth review

Audio-Technica ATH-ADX3000

Manufacturer: Audio-Technica

The Audio-Technica ATH-ADX3000 is a wired over-ear headphone built around an open-back design, a configuration that is generally favored by listeners who prioritize a natural, spacious sound presentation. Weighing 257 g, it comes with a 3-meter tangle-free cable, making it well suited for stationary listening sessions at a desk or in a dedicated listening space.

On the technical side, the ATH-ADX3000 is equipped with a 58 mm driver unit and covers a frequency range from 5 Hz to 45,000 Hz, extending well beyond the standard audible spectrum. Its impedance is rated at 50 Ohms, and the sound pressure level stands at 98 dB/mW. The headphone is strictly wired with no Bluetooth or USB-C connectivity, and it does not include a microphone, active noise cancellation, or passive noise isolation — consistent with its open-back, pure audio focus.

Pros
  • Open-back design suits dedicated home listening sessions where acoustic transparency is valued
  • Wide frequency range from 5 Hz to 45,000 Hz covers well beyond the standard audible spectrum
  • Large 58 mm driver unit provides a substantial transducer for audio reproduction
  • The 3-meter tangle-free cable offers considerable reach for stationary use without cable clutter
  • Stereo speaker configuration delivers a two-channel listening experience
Cons
  • Non-detachable cable means the cable cannot be replaced or swapped if damaged
  • No passive noise isolation or active noise cancellation, making the headphone unsuitable for noisy environments
  • Open-back design offers no sound containment, which can disturb others nearby
  • Cannot be used as a headset — no microphone support and no call functionality
  • No folding mechanism and no included travel bag, limiting portability
  • No water resistance, making it vulnerable to moisture exposure
Who is this for?

This headphone is well suited to home listening enthusiasts who prioritize audio playback in a quiet, controlled environment. The open-back design and wide frequency range from 5 Hz to 45,000 Hz make it a good fit for those who engage in critical or analytical listening at a fixed desk or listening station. The 3-meter cable and over-ear fit further support extended, stationary sessions where comfort and freedom of movement within a room are valued over portability.

Who is this NOT for?

This headphone is not a good match for users who need noise isolation in loud or shared spaces, as the open-back design offers neither passive nor active noise reduction, allowing ambient sound to pass freely in both directions. It is equally unsuitable for anyone seeking communication or call functionality, since it carries no microphone and cannot function as a headset. Users looking for a portable solution will also find it lacking, given the absence of a folding mechanism, travel bag, and any form of water resistance.

Design:

Fit Over-ear
weight 257 g
has a detachable cable ✕
water resistance None
can be folded ✕
is designed for kids ✕
has a tangle free cable ✓
travel bag is included ✕
has an open-back design ✓
cable length 3 m
has stereo speakers ✓

The Audio-Technica ATH-ADX3000 uses an over-ear fit and features an open-back design, making it a headphone oriented toward dedicated home listening rather than portable or outdoor use. It weighs 257 g and comes with a 3-meter tangle-free cable, though the cable is not detachable. The headphone does not fold, offers no water resistance, and is not bundled with a travel bag, further reflecting its stationary use case. It includes stereo speakers and is not designed for children.

Sound quality:

has active noise cancellation (ANC) ✕
lowest frequency 5 Hz
highest frequency 45000 Hz
driver unit size 58 mm
impedance 50 Ohms
supports spatial audio ✕
sound pressure level 98 dB/mW
has passive noise reduction ✕

The ATH-ADX3000 is built around a 58 mm driver unit and covers a wide frequency range from 5 Hz to 45,000 Hz, extending considerably beyond the typical audible limits. Its impedance is rated at 50 Ohms, and the sound pressure level is 98 dB/mW. The headphone does not include active noise cancellation or passive noise isolation, and spatial audio is not supported.

Power:

Has USB Type-C ✕

Connectivity:

connectivity Wired

The ATH-ADX3000 uses a wired connection, with no wireless or Bluetooth connectivity available.

Features:

has a noise-canceling microphone ✕
has ambient sound mode ✕
has in/on-ear detection ✕
number of microphones 0
control panel placed on a device ✕
can be used as a headset ✕
Has an in-line control panel ✕

The ATH-ADX3000 is a listening-only headphone with no microphones and no headset functionality, meaning it cannot be used for calls or voice communication. It lacks an in-line control panel, in-ear detection, and ambient sound mode, and there is no control panel on the device itself. The headphone is focused purely on audio playback, without any of the smart or convenience features commonly found on headsets.

Final Verdict

The Audio-Technica ATH-ADX3000 is a headphone built with a clear and specific purpose: to deliver focused audio playback for stationary, attentive listening. Its open-back design paired with a 58 mm driver and an extended frequency range make it a technically capable choice for users who engage with music or audio in a dedicated, quiet setting. It makes no attempt to serve as an all-purpose headset — there is no microphone, no noise isolation, and no wireless convenience — and that deliberate simplicity is part of its character. For listeners whose priority is audio playback at a fixed location, the ATH-ADX3000 presents a coherent and well-defined specification set; for anyone expecting versatility beyond that, it will fall short by design.