Bang & Olufsen Beoplay H100

Name: Bang & Olufsen Beoplay H100
Brand: Bang & Olufsen
SKU: 74204

Manufacturer: Bang & Olufsen

The Bang & Olufsen Beoplay H100 is an over-ear headphone that combines wireless and wired connectivity with a foldable design, making it a practical option for everyday use and travel. It comes with a travel bag included and carries an IP53 ingress protection rating, offering resistance to sweat and light moisture exposure. The headphones weigh 375 g and are not designed for children.

On the technical side, the Beoplay H100 is equipped with 40 mm drivers and covers a frequency range of 10 Hz to 40,000 Hz, with a sound pressure level of 103 dB/mW. It supports active noise cancellation alongside passive noise reduction, and spatial audio with Dolby Atmos is also on board. Bluetooth 5.3 handles wireless connectivity with a stated range of 10 m, and the headphones support LDAC and AAC codecs along with fast pairing. A 10-microphone array enables noise-canceling calls, and multipoint connectivity allows simultaneous pairing with two devices. The 1,040 mAh battery delivers up to 34 hours of playback, or 32 hours with ANC active, and charges fully in approximately one hour via USB Type-C.

Pros

Battery life reaches 34 hours, dropping only slightly to 32 hours with active noise cancellation enabled
Charges fully in one hour via USB Type-C, minimizing downtime between uses
Ten-microphone array with noise cancellation supports clear call quality
Supports both LDAC and AAC codecs, offering a higher-resolution wireless audio option
Foldable build combined with an included travel bag makes it practical for transport
Multipoint connectivity allows simultaneous pairing with two devices without manual switching

Cons

Maximum Bluetooth range is limited to 10 m, restricting movement from the source device
Wireless charging is not supported, requiring a physical cable connection every time
No mute function available during calls despite the headset capability
NFC pairing is not supported, so quick tap-to-pair is not an option
aptX codec variants including aptX HD and aptX Adaptive are absent, limiting compatibility with some high-resolution sources

Who is this for?

The Beoplay H100 suits users who spend extended periods in noisy environments and need reliable isolation, thanks to both active noise cancellation and passive noise reduction working together. The 34-hour battery life and foldable design with an included travel bag make it a practical fit for frequent travelers or commuters who need durability on the go. Those who regularly take calls will benefit from the 10-microphone noise-canceling setup and multipoint connectivity, which allows seamless switching between two paired devices without manual re-pairing.

Who is this NOT for?

Users who need to move freely at greater distances from their audio source may find the 10 m Bluetooth range limiting in larger spaces such as open offices or home environments where the source device is in another room. Those who rely on aptX-based codecs — including aptX HD or aptX Adaptive — for high-resolution wireless audio from compatible sources will not find support here, making this a less suitable choice for listeners whose existing devices are built around that codec ecosystem. Additionally, users who prefer the convenience of wireless charging will need to adjust their habits, as charging requires a physical USB Type-C connection each time.

Design:

Fit	Over-ear
weight	375 g
Ingress Protection (IP) rating	IP53
water resistance	Sweat resistant
can be folded	✓
is designed for kids	✕
travel bag is included	✓
has an open-back design	✕
has stereo speakers	✓

The Bang & Olufsen Beoplay H100 uses an over-ear fit and weighs 375 g, with a closed-back design that houses stereo speakers. It can be folded for easier transport and comes with a travel bag included. The headphones carry an IP53 ingress protection rating, making them sweat resistant, though they are not intended for use by children.

Sound quality:

has active noise cancellation (ANC)	✓
lowest frequency	10 Hz
highest frequency	40000 Hz
driver unit size	40 mm
supports spatial audio	✓
sound pressure level	103 dB/mW
has a neodymium magnet	✓
has passive noise reduction	✓

The Beoplay H100 features 40 mm drivers backed by neodymium magnets and covers a frequency range of 10 Hz to 40,000 Hz, with a sound pressure level of 103 dB/mW. Both active noise cancellation and passive noise reduction are supported, giving the headphones two layers of isolation from ambient sound. Spatial audio is also available, rounding out a sound profile that addresses both fidelity and environmental control.

Power:

Battery life	34 hours
Battery life (ANC)	32 hours
charge time	1 hours
Has USB Type-C	✓
has a battery level indicator	✓
has wireless charging	✕
battery power	1040 mAh
Has a solar power battery	✕
has a rechargeable battery	✓
has a removable battery	✕

The Beoplay H100 is equipped with a built-in 1,040 mAh rechargeable battery that is not removable, delivering up to 34 hours of playback, or 32 hours when active noise cancellation is in use. Charging is handled via USB Type-C and takes approximately one hour to complete; wireless and solar charging are not supported. A battery level indicator is included so remaining charge can be monitored at a glance.

Connectivity:

connectivity	Wireless & wired
Bluetooth version	5.3
has aptX Adaptive	✕
has aptX	✕
has LDAC	✓
has LDHC	✕
has Bluetooth LE Audio	✕
has aptX Low Latency	✕
has aptX HD	✕
has aptX Lossless	✕
has AAC	✓
has Auracast	✕
maximum Bluetooth range	10 m
has fast pairing	✓
supports Bluetooth pairing using NFC	✕

The Beoplay H100 supports both wireless and wired connectivity, using Bluetooth 5.3 with a maximum range of 10 m. Among the supported audio codecs, LDAC and AAC are available, while aptX, aptX HD, aptX Adaptive, aptX Low Latency, aptX Lossless, and LDHC are not. Fast pairing is supported for quicker setup, though NFC pairing and Bluetooth LE Audio with Auracast are not included.

Features:

has a noise-canceling microphone	✓
has ambient sound mode	✓
has in/on-ear detection	✓
number of microphones	10
has a mute function	✕
multipoint count	2
control panel placed on a device	✓
can be used as a headset	✓
Has an in-line control panel	✕

The Beoplay H100 includes a 10-microphone array with noise-canceling capability, allowing it to function as a headset for calls, though a dedicated mute function is not available. Ambient sound mode lets environmental audio through when needed, and in/on-ear detection enables automatic playback pausing when the headphones are removed. Controls are handled via an on-device panel rather than an in-line remote, and multipoint connectivity supports simultaneous pairing with up to two devices.

Miscellaneous:

has Dolby Atmos	✓

The Beoplay H100 supports Dolby Atmos.

Final Verdict

The Bang & Olufsen Beoplay H100 is a well-specified over-ear headphone built around long listening sessions and practical everyday use, combining strong noise isolation through dual-layer cancellation with a 34-hour battery life that holds up reliably even with ANC active. Its 10-microphone setup, multipoint pairing, and foldable travel-ready form factor give it genuine versatility across commuting, remote work, and extended travel. Users within ecosystems that depend on aptX codecs or who expect wireless charging may find certain gaps, but for those prioritizing endurance, call clarity, and LDAC-based audio quality, the H100 represents a focused and coherent package from Bang & Olufsen.