TurboVS
Corsair Vengeance DDR5-5200 16GB (1x16GB) specifications and in-depth review

Corsair Vengeance DDR5-5200 16GB (1x16GB)

Manufacturer: Corsair

The Corsair Vengeance DDR5-5200 16GB (1x16GB) is a single-stick DDR5 memory module designed for systems that accept 262-pin SO-DIMM configurations. It operates at 5200 MHz, matching its tested speed to its SPD-rated speed, and supports Intel XMP 3.0 for straightforward profile-based setup. The module runs without an integrated heatsink and has no RGB lighting, keeping its physical footprint minimal at 29.97 mm in height.

On the technical side, the module uses CL44 primary timings with tRCD and tRP both set at 44 and a tRAS of 84, resulting in a true latency of 16.92 ns at its rated speed. It operates at 1.1V and carries a capacity of 16GB as a single-rank unit, with no ECC support and no Samsung B-Die implementation. The kit is positioned as a single-channel 16GB configuration, suitable for platforms that natively support DDR5 at this speed range.

Pros
  • Intel XMP 3.0 support allows the module to run at its rated 5200 MHz speed on compatible platforms without manual timing configuration
  • The SO-DIMM form factor and 29.97 mm height make it physically suited for compact systems where space is a constraint
  • Operating at 1.1V keeps power draw in line with standard DDR5 expectations for this speed range
  • The tested speed matches the SPD-rated speed at 5200 MHz, meaning no gap between rated and actual out-of-box frequency
Cons
  • Configured as a single 16GB module, it occupies one slot without providing any dual-channel capability on its own
  • No integrated heatsink is included, leaving thermal management entirely dependent on system airflow
  • ECC memory is not supported, ruling it out for workloads or platforms that require error-correcting memory
  • Samsung B-Die is not used, which may matter to users specifically seeking that chip configuration for overclocking purposes
Who is this for?

The Corsair Vengeance DDR5-5200 16GB (1x16GB) is a practical fit for users building or upgrading compact systems that use the SO-DIMM form factor, such as small form factor desktops or laptops with DDR5 support. The Intel XMP 3.0 profile makes it straightforward to reach the rated 5200 MHz speed on compatible Intel platforms without manual configuration, which suits users who want a simple and reliable setup. Its compact 29.97 mm height and absence of a heatsink or RGB lighting also make it well suited to space-constrained builds where clearance and aesthetics are secondary to function.

Who is this NOT for?

This module is not suited to users who need ECC memory support, as error correction is entirely absent, making it unsuitable for workstation or server use cases where data integrity under load is a requirement. Because it is a single 16GB stick, it cannot provide dual-channel memory bandwidth on its own, which makes it a poor fit for users who want to maximize memory throughput from the outset. Users specifically seeking Samsung B-Die chips for aggressive overclocking will also need to look elsewhere, as that configuration is not present in this module.

Performance:

true latency 16.92 ns
memory speed (Tested Speed) 5200
memory speed (SPD) 5200 MHz
DDR memory version 5
CAS Latency (CL) 44
tRAS timing 84
tRCD timing 44
tRP timing 44

The Corsair Vengeance DDR5-5200 runs at a tested and SPD-rated speed of 5200 MHz using the DDR5 standard, with primary timings of CL44-44-44-84 covering CAS Latency, tRCD, tRP, and tRAS respectively. These timings translate to a true latency of 16.92 ns at the module's rated frequency.

General info:

form factor 262-pin SO-DIMM
memory size (total) 1 x 16GB
has Samsung B-Die ✕
voltage 1.1V
height 29.97 mm
memory size 16GB

The Corsair Vengeance DDR5-5200 16GB (1x16GB) uses a 262-pin SO-DIMM form factor and is configured as a single 16GB module, operating at 1.1V. It stands 29.97 mm tall and does not use Samsung B-Die memory chips.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0
Supports ECC memory ✕
Has an integrated heatsink ✕
has RGB lighting ✕

The Corsair Vengeance DDR5-5200 16GB (1x16GB) supports Intel XMP 3.0 for easy frequency and timing profile activation on compatible platforms. The module does not support ECC memory, and it comes without an integrated heatsink or RGB lighting, resulting in a compact and unadorned design.

Benchmarks:

Final Verdict

The Corsair Vengeance DDR5-5200 16GB (1x16GB) is a straightforward DDR5 SO-DIMM module that delivers its rated 5200 MHz speed reliably, backed by Intel XMP 3.0 support for hassle-free setup on compatible platforms. Its compact, heatsink-free design suits space-constrained builds well, and the 1.1V operating voltage keeps it within standard DDR5 parameters. That said, its single-module configuration and lack of ECC support mean it is best directed at everyday consumer systems rather than professional or throughput-intensive workloads. For users building or upgrading a compact Intel-based DDR5 system who need a no-frills, reliable 16GB stick that reaches its rated speed out of the box, the Corsair Vengeance DDR5-5200 delivers exactly what its specifications promise.