TurboVS
Corsair Vengeance DDR5-5200 32GB (2x16GB) specifications and in-depth review

Corsair Vengeance DDR5-5200 32GB (2x16GB)

Manufacturer: Corsair

The Corsair Vengeance DDR5-5200 is a 32GB dual-channel SO-DIMM memory kit designed for DDR5 platforms, consisting of two 16GB modules in a compact 262-pin form factor. It operates at 5200 MHz as both its tested and SPD speed, and includes an integrated heatsink while keeping a low profile at just under 30 mm in height.

On the technical side, the kit uses CL44-44-44-84 timings at 1.1V, yielding a true latency of approximately 16.92 ns. It supports Intel XMP 3.0 for straightforward profile-based configuration, though it does not carry AMD EXPO certification, ECC support, or Samsung B-Die memory chips. RGB lighting is also absent from this particular model.

Pros
  • Runs at 5200 MHz on both tested and SPD-rated speeds, meaning no gap between advertised and real-world clock behavior
  • Intel XMP 3.0 support allows straightforward frequency profile activation without manual timing configuration
  • Integrated heatsink helps manage module temperatures during operation
  • SO-DIMM form factor at under 30 mm in height suits compact and space-constrained builds
  • 1.1V operating voltage is within the standard DDR5 range, avoiding excessive power draw
Cons
  • CL44 primary timings are relatively loose for a 5200 MHz DDR5 kit, resulting in a true latency of 16.92 ns
  • No AMD EXPO support limits out-of-box profile compatibility on AMD platforms
  • Does not use Samsung B-Die chips, which some users specifically seek for overclocking headroom
  • Absence of RGB lighting may be a drawback for users building systems with coordinated lighting setups
  • ECC is not supported, ruling out use in workloads or systems that require error-correcting memory
Who is this for?

This kit is well-suited for users building compact systems around the SO-DIMM form factor, such as mini-PCs, small form factor laptops, or NUC-style platforms that require DDR5 memory. The 5200 MHz rated speed with Intel XMP 3.0 support makes it a practical choice for Intel-platform builds where automatic profile loading is preferred over manual tuning. At 32GB total capacity across two modules, it also fits users who need a reasonable amount of memory for everyday productivity, light content work, or dual-channel configurations in space-constrained environments.

Who is this NOT for?

Users on AMD platforms looking for out-of-box overclocking profile support will find this kit limiting, as it lacks AMD EXPO certification. The CL44 timings at 5200 MHz produce a true latency of 16.92 ns, which makes it less appealing for users who prioritize low-latency memory for latency-sensitive workloads. Additionally, the absence of ECC support means it is entirely unsuitable for workstations, servers, or any environment where memory error correction is a requirement.

Performance:

true latency 16.92 ns
memory speed (Tested Speed) 5200
memory speed (SPD) 5200 MHz
DDR memory version 5
CAS Latency (CL) 44
tRAS timing 84
tRCD timing 44
tRP timing 44

The Corsair Vengeance DDR5-5200 operates on DDR5 and runs at a tested and SPD-rated speed of 5200 MHz, delivering a true latency of 16.92 ns. Its primary timings are set at CL44-44-44, covering CAS Latency, tRCD, and tRP respectively, while tRAS is rated at 84 cycles — a configuration typical of higher-frequency DDR5 modules operating within this speed range.

General info:

form factor 262-pin SO-DIMM
memory size (total) 2 x 16GB
has Samsung B-Die ✕
voltage 1.1V
height 29.97 mm
memory size 16GB

This kit uses the 262-pin SO-DIMM form factor and consists of two 16GB modules for a total capacity of 32GB, running at a voltage of 1.1V. Each module stands at 29.97 mm in height, and the kit does not use Samsung B-Die memory chips.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✕

The module supports Intel XMP 3.0 for profile-based frequency configuration and includes an integrated heatsink for thermal management. It does not support ECC memory or AMD EXPO, and comes without RGB lighting.

Benchmarks:

Final Verdict

The Corsair Vengeance DDR5-5200 32GB (2x16GB) is a focused SO-DIMM DDR5 kit that delivers consistent performance for Intel-based compact systems, with its 5200 MHz speed matched across both tested and SPD ratings providing a reliable foundation for dual-channel configurations. While the CL44 timings and lack of AMD EXPO support narrow its ideal audience, the kit's XMP 3.0 compatibility, integrated heatsink, and standard 1.1V operation make it a dependable choice for users building space-constrained Intel platforms who need 32GB of DDR5 memory without the complexity of manual tuning.