TurboVS
Corsair Vengeance DDR5-5600 16GB (1x16GB) specifications and in-depth review

Corsair Vengeance DDR5-5600 16GB (1x16GB)

Manufacturer: Corsair

The Corsair Vengeance DDR5-5600 is a 16GB laptop memory module built around the DDR5 standard, offering a tested operating speed of 5600 MHz for systems that support it. Designed in a compact 262-pin SO-DIMM form factor, it fits the space constraints of notebooks and small-form-factor builds without an integrated heatsink or RGB lighting, keeping the profile at 29.97 mm in height. The module runs at 1.1V and ships as a single 16GB unit.

On the timing side, the Corsair Vengeance DDR5-5600 carries CL48-48-48-90 latency figures, which translate to a true latency of approximately 17.14 ns at its rated speed. The SPD-programmed default frequency sits at 4800 MHz, with the full 5600 MHz profile accessible via Intel XMP 3.0. The module does not use Samsung B-Die and does not support ECC, placing it squarely in the consumer mainstream segment rather than workstation or server applications.

Pros
  • Runs at a tested speed of 5600 MHz, well above the 4800 MHz SPD default, giving systems with XMP support a meaningful frequency boost
  • Intel XMP 3.0 support allows the full speed and timing profile to be loaded automatically on compatible platforms
  • The absence of a heatsink keeps the physical height at just under 30 mm, which helps with clearance in tight SO-DIMM slots
  • Operating voltage of 1.1V is within the standard DDR5 range, placing no unusual power demands on the host system
  • The 262-pin SO-DIMM form factor is suited to laptops and compact builds that require this specific interface
Cons
  • CAS Latency of 48 is relatively high, and the resulting true latency of 17.14 ns reflects tighter headroom for latency-sensitive workloads
  • Does not use Samsung B-Die, which may limit overclocking flexibility beyond the rated XMP profile
  • No ECC support means the module cannot be used in configurations that require error-correcting memory
  • Ships as a single 16GB module, so dual-channel operation requires purchasing an additional unit separately
  • No heatsink is included, offering no thermal management beyond what the system itself provides
Who is this for?

This module is a solid fit for users upgrading a laptop or compact system that uses a 262-pin SO-DIMM slot and supports Intel XMP 3.0, as it allows the full 5600 MHz profile to activate automatically without manual tuning. It works well for everyday computing and moderately demanding workloads where 16GB of DDR5 capacity is sufficient, and its low-profile, heatsink-free design suits chassis with limited clearance above the memory slot.

Who is this NOT for?

This module is not a good match for users who need error-correcting memory, as ECC is not supported, ruling it out for workstation or server environments where data integrity is critical. Those looking to run a dual-channel configuration from the outset will find that a single 16GB stick falls short, since a second module must be sourced separately. It is also unlikely to satisfy users on platforms that do not support Intel XMP 3.0, as the memory will default to 4800 MHz and the higher-speed profile will remain inaccessible.

Performance:

true latency 17.14 ns
memory speed (Tested Speed) 5600
memory speed (SPD) 4800 MHz
DDR memory version 5
CAS Latency (CL) 48
tRAS timing 90
tRCD timing 48
tRP timing 48

This module operates on the DDR5 standard with a tested speed of 5600 MHz, while its SPD-programmed default sits at 4800 MHz for out-of-the-box compatibility. The primary timings are set at CL48-48-48-90, covering CAS Latency, tRCD, tRP, and tRAS respectively, which at the rated frequency translates to a true latency of 17.14 ns.

General info:

form factor 262-pin SO-DIMM
memory size (total) 1 x 16GB
has Samsung B-Die ✕
voltage 1.1V
height 29.97 mm
memory size 16GB

The module uses a 262-pin SO-DIMM form factor and is configured as a single 16GB stick, making up 16GB of total capacity. It operates at 1.1V and measures 29.97 mm in height, fitting within the compact footprint typical of this form factor. The module does not use Samsung B-Die memory chips.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0
Supports ECC memory ✕
Has an integrated heatsink ✕
has RGB lighting ✕

The module supports Intel XMP 3.0, allowing compatible systems to load the optimized frequency and timing profile automatically. It does not include an integrated heatsink or RGB lighting, resulting in a plain, low-profile appearance. ECC memory is not supported, which places this module outside the scope of error-correcting workstation or server configurations.

Benchmarks:

Final Verdict

The Corsair Vengeance DDR5-5600 16GB is a straightforward DDR5 SO-DIMM module that delivers on its core promise: a tested operating speed of 5600 MHz on compatible systems, made accessible through Intel XMP 3.0 without any manual configuration. Its compact, heatsink-free design and standard 1.1V operating voltage make it a practical choice for laptop upgrades or small-form-factor builds where space and power draw matter. That said, its high CAS latency, single-module configuration, and absence of ECC support mean it is best suited to mainstream consumer use rather than latency-sensitive or mission-critical environments. For users seeking a no-frills DDR5 SO-DIMM upgrade with XMP support, it covers the essentials cleanly.