TurboVS
Corsair Vengeance RGB DDR5-6000 C38 64GB (2x32GB) specifications and in-depth review

Corsair Vengeance RGB DDR5-6000 C38 64GB (2x32GB)

Manufacturer: Corsair

The Corsair Vengeance RGB DDR5-6000 is a 64GB desktop memory kit consisting of two 32GB modules in a standard 288-pin DIMM form factor. Designed for enthusiast DDR5 platforms, it operates at a tested speed of 6000 MHz while maintaining compatibility with both Intel XMP 3.0 and AMD EXPO profiles, making it straightforward to configure on supported motherboards. An integrated heatsink and RGB lighting are part of the physical design, with the modules standing 44 mm tall.

On the timing side, the kit runs with a CAS latency of 38, placing its true latency at approximately 12.67 ns at the rated speed. Supporting timings include tRCD and tRP both set at 44, and a tRAS of 96. The modules operate at 1.35V and carry an SPD speed of 4800 MHz for out-of-box compatibility before any XMP or EXPO profile is activated. ECC is not supported, and the kit does not use Samsung B-Die memory.

Pros
  • Supports both Intel XMP 3.0 and AMD EXPO profiles, enabling automatic configuration on a wide range of compatible platforms
  • Tested speed of 6000 MHz is well above the DDR5 SPD default of 4800 MHz, offering a meaningful clock rate uplift when the profile is enabled
  • Total capacity of 64GB across two modules suits memory-intensive workloads that demand substantial headroom
  • Integrated heatsink helps manage heat dissipation during operation
  • RGB lighting provides visual customization options for builds where aesthetics matter
Cons
  • CAS latency of 38 is relatively high, which partially offsets the benefit of the elevated clock speed as reflected in the 12.67 ns true latency figure
  • Does not support ECC memory, ruling it out for use cases that require error-correcting functionality
  • At 44 mm tall, the modules may cause clearance conflicts with large CPU coolers in certain cases
  • Does not use Samsung B-Die, which some users specifically seek out for overclocking headroom beyond rated speeds
Who is this for?

This kit is well-suited to enthusiast desktop builders running platforms that support Intel XMP 3.0 or AMD EXPO, where the 6000 MHz tested speed can be fully utilized with a single profile activation. The 64GB total capacity across two modules makes it a practical fit for users handling memory-intensive tasks such as large-scale content creation, video editing, or heavily multitasked workflows that genuinely benefit from substantial RAM headroom. The inclusion of an integrated heatsink and RGB lighting also makes it a reasonable choice for open-case builds where both thermal management and visual presentation are considerations.

Who is this NOT for?

Users who require ECC memory support — such as those running workstations or servers where data integrity is a priority — will find this kit unsuitable, as that feature is entirely absent. The CAS latency of 38 and a true latency of 12.67 ns may not satisfy users who prioritize tight timings over raw clock speed, making it a less appropriate fit for latency-sensitive applications. Additionally, builders using large tower CPU coolers should take note of the 44 mm module height, as physical clearance conflicts are a real possibility in certain configurations.

Performance:

true latency 12.67 ns
memory speed (Tested Speed) 6000
memory speed (SPD) 4800 MHz
DDR memory version 5
CAS Latency (CL) 38
tRAS timing 96
tRCD timing 44
tRP timing 44

The Corsair Vengeance RGB DDR5-6000 operates on DDR5 and is rated at a tested speed of 6000 MHz, while its SPD speed sits at 4800 MHz for default out-of-box operation. It runs with a CAS latency of 38, which translates to a true latency of 12.67 ns at the rated frequency. The remaining primary timings are tRCD at 44, tRP at 44, and tRAS at 96.

General info:

form factor 288-pin DIMM
memory size (total) 2 x 32GB
has Samsung B-Die ✕
voltage 1.35V
height 44 mm
memory size 32GB

This kit uses the standard 288-pin DIMM form factor and consists of two 32GB modules for a total capacity of 64GB. Each module operates at 1.35V and stands 44 mm tall. Samsung B-Die memory is not used in this kit.

Features:

Intel XMP / AMD EXPO AMD EXPO, Intel XMP 3.0
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✓

The kit supports both Intel XMP 3.0 and AMD EXPO profiles, allowing compatible motherboards to load the rated speed and timings automatically. An integrated heatsink is included, and the modules feature RGB lighting. ECC memory is not supported.

Benchmarks:

Final Verdict

The Corsair Vengeance RGB DDR5-6000 is a capable DDR5 kit aimed at enthusiast desktop builders who want a meaningful step above the DDR5 baseline without sacrificing platform flexibility. Its 6000 MHz tested speed with dual Intel XMP 3.0 and AMD EXPO support makes it straightforward to deploy on modern platforms, and the 64GB total capacity gives it genuine utility for users with demanding workloads. The relatively high CAS latency and absence of ECC support do narrow its appeal for latency-focused or professional-grade use cases, but within its intended scope — mainstream enthusiast builds that benefit from capacity, speed, and visual customization — it presents a well-rounded specification set.

Popular Comparisons

Corsair Vengeance RGB DDR5-6000 C38 64GB (2x32GB)
Corsair Vengeance RGB DDR5-6000 C38 64GB (2x32GB)
VS
Patriot Viper Elite 5 RGB DDR5-6200 32GB (2x16GB)
Patriot Viper Elite 5 RGB DDR5-6200 32GB (2x16GB)
Corsair Vengeance RGB DDR5-6000 C38 64GB (2x32GB)
Corsair Vengeance RGB DDR5-6000 C38 64GB (2x32GB)
VS
Patriot Viper Elite 5 RGB DDR5-6200 64GB (2x32GB)
Patriot Viper Elite 5 RGB DDR5-6200 64GB (2x32GB)
Corsair Vengeance RGB DDR5-6000 C38 64GB (2x32GB)
Corsair Vengeance RGB DDR5-6000 C38 64GB (2x32GB)
VS
Patriot Viper Venom DDR5-6000 C30 64GB (2x32GB)
Patriot Viper Venom DDR5-6000 C30 64GB (2x32GB)