TurboVS
Edifier Lolli Pro 3 specifications and in-depth review

Edifier Lolli Pro 3

Manufacturer: Edifier

The Edifier Lolli Pro 3 are fully wireless in-ear earbuds with an IP54 ingress protection rating, offering resistance to sweat and light dust without a neckband or wingtip design. They support both active noise cancellation and an ambient sound mode, giving users control over how much of their surroundings they let in. A six-microphone noise-canceling array handles call audio, and spatial audio support is included alongside stereo playback for a more immersive listening experience.

On the connectivity side, the Lolli Pro 3 run on Bluetooth 5.3 with a notably broad codec range: LDAC, LDHC, aptX Adaptive, aptX, and aptX Voice are all supported, though AAC is absent. The stated audio latency is 80 ms, and the maximum wireless range reaches 10 m. The 6 mm driver unit covers a frequency range of 20 Hz to 40,000 Hz with a sound pressure level of 92 dB/mW. Battery life sits at 6 hours per charge — or 5 hours with ANC active — and the charging case extends that to a total of 20 hours; a full charge takes 1 hour, and fast charging is supported via USB Type-C. Wireless charging is not available.

Pros
  • Broad codec support including LDAC, LDHC, aptX Adaptive, aptX, and aptX Voice covers a wide range of high-quality wireless audio transmission options
  • Both active noise cancellation and ambient sound mode are included, giving users flexibility over how much environmental sound they allow in
  • Spatial audio support adds a dimensional quality to stereo playback
  • The six-microphone noise-canceling array supports clearer call quality in varied environments
  • IP54 rating provides protection against both sweat and light dust, not just moisture alone
  • A 1-hour full charge time combined with fast charging support minimizes downtime
Cons
  • Battery life of 6 hours per charge is relatively limited, dropping further to 5 hours with ANC active
  • The charging case only adds 14 additional hours, bringing the total to 20 hours — less than many competing configurations
  • Wireless charging is not supported, restricting charging to wired methods only
  • Fast pairing is not available, requiring a manual Bluetooth pairing process each time
  • In-ear detection for automatic playback pause is absent, meaning music continues playing when an earbud is removed
  • AAC codec is not supported despite the otherwise extensive codec lineup
Who is this for?

The Edifier Lolli Pro 3 are well-suited to audio enthusiasts who want access to high-resolution codec support — including LDAC, LDHC, and aptX Adaptive — in a compact true wireless form factor. Users who regularly move between noisy and quieter environments will benefit from having both active noise cancellation and ambient sound mode available on the same device. The IP54 rating and sweat resistance also make them a reasonable choice for active users who need a degree of protection against dust and moisture during workouts or commutes.

Who is this NOT for?

Users who depend on long listening sessions will find the 6-hour battery life — which drops to 5 hours with ANC running — limiting for extended travel or all-day use, especially given the case only adds 14 additional hours. Those who prefer a seamless setup experience will be inconvenienced by the absence of fast pairing and NFC, both of which are missing. Additionally, users who frequently switch between audio and video content requiring low-latency performance should note that aptX Low Latency is not supported and the stated audio latency is 80 ms.

Design:

Fit In-ear
Ingress Protection (IP) rating IP54
water resistance Sweat resistant
has no wires or cables ✓
are neckband earbuds ✕
wingtips included ✕
has stereo speakers ✓

The Edifier Lolli Pro 3 use a true wireless in-ear design with no cables, neckband, or wingtips included. They carry an IP54 rating, providing protection against sweat and light dust ingress. Stereo speakers are present in both earbuds, keeping the overall form factor clean and unencumbered.

Sound quality:

has active noise cancellation (ANC) ✓
has passive noise reduction ✓
driver unit size 6 mm
lowest frequency 20 Hz
highest frequency 40000 Hz
supports spatial audio ✓
sound pressure level 92 dB/mW
has a neodymium magnet ✕

The Edifier Lolli Pro 3 combine active noise cancellation with passive noise reduction, and also support spatial audio for a more dimensional listening experience. The 6 mm driver unit covers a broad frequency range of 20 Hz to 40,000 Hz, with a sound pressure level of 92 dB/mW. A neodymium magnet is not part of the driver construction.

Power:

Battery life 6 hours
Battery life of charging case 20 hours
Battery life (ANC) 5 hours
charge time 1 hours
has wireless charging ✕
has a battery level indicator ✓
has a rechargeable battery ✓

The Edifier Lolli Pro 3 offer up to 6 hours of playback per charge, which drops to 5 hours when active noise cancellation is enabled. The charging case brings the total available battery to 20 hours. A full charge takes 1 hour, and a battery level indicator is included to track remaining power. Wireless charging is not supported, so the earbuds rely on wired charging through the case.

Connectivity:

has fast pairing ✕
Has USB Type-C ✓
Bluetooth version 5.3
has LDAC ✓
has LDHC ✓
has aptX Adaptive ✓
has aptX Low Latency ✕
has aptX HD ✕
has aptX ✓
has aptX Lossless ✕
audio latency 80 ms
has aptX Voice ✓
maximum Bluetooth range 10 m
supports Bluetooth pairing using NFC ✕
Can be used wirelessly ✓
has AAC ✕

The Edifier Lolli Pro 3 use Bluetooth 5.3 for wireless audio transmission with a maximum range of 10 m and a stated audio latency of 80 ms. The codec support is broad, covering LDAC, LDHC, aptX Adaptive, aptX, and aptX Voice, while aptX Low Latency, aptX HD, aptX Lossless, and AAC are not supported. Fast pairing and NFC pairing are absent, meaning device setup requires a standard Bluetooth pairing process. USB Type-C is present for wired charging.

Features:

has ambient sound mode ✓
has in/on-ear detection ✕
has find device feature ✕
Supports fast charging ✓
has a mute function ✓
can be used as a headset ✓
control panel placed on a device ✓
Has voice prompts ✓
travel bag is included ✓
Has an in-line control panel ✕
Has a temperature sensor ✕

The Edifier Lolli Pro 3 include an ambient sound mode for controlled environmental awareness alongside fast charging and a mute function for call management. They can be used as a headset, with an on-device control panel and voice prompts available for hands-free interaction. A travel bag is included in the box. In-ear detection for automatic pause, a find-device feature, an in-line control panel, and a temperature sensor are not part of the feature set.

Microphone:

number of microphones 6
has a noise-canceling microphone ✓

The Edifier Lolli Pro 3 are fitted with a six-microphone array that includes noise-canceling capability, intended to reduce background noise during calls and voice use.

Final Verdict

The Edifier Lolli Pro 3 carves out a clear position for listeners who want broad high-resolution codec support — spanning LDAC, LDHC, and aptX Adaptive — in a compact, IP54-rated true wireless package that also includes active noise cancellation, ambient sound mode, and spatial audio. That combination of audio transmission flexibility and environmental awareness features is notably comprehensive for earbuds of this form factor. Where the product falls short is in endurance and convenience — battery life is modest, and the absence of fast pairing or wireless charging adds friction to everyday use. For users whose priority is audio quality and listening versatility over all-day battery stamina, the Lolli Pro 3 is a technically capable option that delivers meaningfully on its core strengths.

Popular Comparisons

Edifier Lolli Pro 3
Edifier Lolli Pro 3
VS
Sony WF-1000XM5
Sony WF-1000XM5