Edifier LolliClip

Name: Edifier LolliClip
Brand: Edifier
SKU: 6831

Manufacturer: Edifier

The Edifier LolliClip are true wireless in-ear earbuds designed for everyday wireless listening without the clutter of cables. Weighing just 14 g, they carry an IP56 ingress protection rating, making them resistant to water and dust in a range of conditions. The earbuds support multipoint connection for up to two devices simultaneously and include in-ear detection that automatically pauses playback when removed.

On the technical side, the LolliClip use Bluetooth 5.4 with LDAC and AAC codec support, and a 13 mm driver unit covering a frequency range of 20 Hz to 40,000 Hz with a sound pressure level of 90 dB/mW. Spatial audio is supported, and the six-microphone array includes noise-canceling functionality for calls. Battery life reaches 9 hours per charge, with the charging case extending total playback to 30 hours; fast charging is supported via USB Type-C, and a full charge takes approximately 1.5 hours.

Pros

IP56 water and dust resistance makes the earbuds suitable for use in rain or during workouts
LDAC codec support enables high-resolution audio transmission over Bluetooth
Six-microphone array with noise cancellation supports clearer call quality
Multipoint connection allows simultaneous pairing with two devices
The charging case extends total playback to 30 hours, reducing how often the case itself needs recharging
In-ear detection automatically pauses playback when the earbuds are removed

Cons

No active noise cancellation, limiting effectiveness in loud environments
Wireless charging is not supported, requiring a wired USB-C connection every time
Maximum Bluetooth range of 10 m is relatively short for a wireless earbud
No ambient sound mode, meaning external sounds are fully blocked during use
No aptX codec support in any variant, which may limit compatibility with certain Android devices preferring aptX-based audio

Who is this for?

The Edifier LolliClip is well suited to users who want a fully wireless, cable-free listening experience with solid protection against the elements, thanks to its IP56 rating. Those who frequently take calls on the go will appreciate the six-microphone array with noise cancellation, and the multipoint connection makes it a practical choice for anyone who regularly switches between two devices such as a phone and a laptop. The 30-hour combined battery life also makes it a reasonable fit for frequent travelers or commuters who need extended use between charging sessions.

Who is this NOT for?

Users who prioritize active noise cancellation for blocking out loud or distracting environments — such as open offices or public transport — will find this product lacking, as ANC is absent. Similarly, those invested in aptX-based audio ecosystems on Android will find the codec support limited, with no aptX variant available. The product is also not ideal for users seeking wireless charging convenience, since the case must be charged via a wired USB-C connection, and the 10 m Bluetooth range may be restrictive for those who need greater freedom of movement from their source device.

Design:

Fit	In-ear
Ingress Protection (IP) rating	IP56
water resistance	Water resistant
weight	14 g
has no wires or cables	✓
are neckband earbuds	✕
wingtips included	✕
has RGB lighting	✕
has stereo speakers	✓
has UV light	✕
Has a display	✕

The Edifier LolliClip adopt an in-ear fit and are fully true wireless, with no cables or neckband connecting the two earbuds. They carry an IP56 ingress protection rating, confirming resistance to water and dust in everyday use. Each earbud houses a stereo speaker, while the total weight of 14 g keeps the overall build light. The design omits wingtips, RGB lighting, a UV light, and any built-in display, reflecting a straightforward and compact form factor.

Sound quality:

has active noise cancellation (ANC)	✕
has passive noise reduction	✓
driver unit size	13 mm
lowest frequency	20 Hz
highest frequency	40000 Hz
supports spatial audio	✓
has Dolby Atmos	✕
has Dirac Virtuo	✕
sound pressure level	90 dB/mW
has a neodymium magnet	✕

The Edifier LolliClip use a 13 mm driver unit and cover a frequency range of 20 Hz to 40,000 Hz, with a sound pressure level of 90 dB/mW. Passive noise reduction is present to help block out ambient sound, though active noise cancellation is not included. Spatial audio is supported, while Dolby Atmos and Dirac Virtuo processing are absent. The drivers do not use a neodymium magnet.

Power:

Battery life	9 hours
Battery life of charging case	30 hours
charge time	1.5 hours
has wireless charging	✕
Has a solar power battery	✕
has a battery level indicator	✓
has a rechargeable battery	✓

The Edifier LolliClip deliver 9 hours of battery life per charge, with the accompanying charging case extending total playback to 30 hours. A full charge takes 1.5 hours, and the earbuds feature a battery level indicator so users can monitor remaining power. The battery is rechargeable, though wireless charging and solar power are not supported.

Connectivity:

has fast pairing	✓
Has USB Type-C	✓
Bluetooth version	5.4
has LDAC	✓
has LDHC	✕
has Bluetooth LE Audio	✕
has aptX Adaptive	✕
has aptX Low Latency	✕
has aptX HD	✕
has aptX	✕
has aptX Lossless	✕
has aptX Voice	✕
has Auracast	✕
maximum Bluetooth range	10 m
supports Bluetooth pairing using NFC	✕
Can be used wirelessly	✓
has AAC	✓

The Edifier LolliClip connect wirelessly via Bluetooth 5.4 with a maximum range of 10 m, and support fast pairing for quick device setup. Supported audio codecs include LDAC and AAC, while aptX in any of its variants (including aptX Adaptive, aptX HD, aptX Low Latency, aptX Lossless, and aptX Voice), LDHC, Bluetooth LE Audio, and Auracast are not available. NFC pairing is also absent. Charging is handled via USB Type-C.

Features:

has ambient sound mode	✕
has in/on-ear detection	✓
Supports fast charging	✓
multipoint count	2
can read notifications	✕
has a mute function	✓
can be used as a headset	✓
control panel placed on a device	✓
Has voice prompts	✓
travel bag is included	✓
Has an in-line control panel	✕
Has a temperature sensor	✕
Has a built-in camera remote control function	✕

The Edifier LolliClip support multipoint connection for up to two devices simultaneously and include in-ear detection that automatically pauses playback when the earbuds are removed. Fast charging is supported, and the earbuds can function as a headset with a mute function available during calls. Controls are handled via a panel on the device itself rather than an in-line panel, and voice prompts are present to assist with navigation. A travel bag is included in the box. Ambient sound mode, notification reading, a body temperature sensor, and a camera remote shutter function are not available.

Microphone:

number of microphones	6
has a noise-canceling microphone	✓

The Edifier LolliClip feature a six-microphone array with noise-canceling capability, helping to reduce unwanted background sound during calls and voice input.

Final Verdict

The Edifier LolliClip is a true wireless earbud that covers the practical essentials well — IP56-rated durability, a broad frequency response, LDAC codec support, and a six-microphone noise-canceling array make it a capable option for daily commuters and active users alike. Its 30-hour combined battery life and multipoint connectivity add genuine everyday utility, while the absence of active noise cancellation and limited Bluetooth range are trade-offs worth considering for users with more demanding listening environments. Overall, the LolliClip is a well-rounded option for those who prioritize wireless freedom, call clarity, and reliable build quality in their everyday earbuds.