TurboVS
Fiio JT3 specifications and in-depth review

Fiio JT3

Manufacturer: Fiio

The Fiio JT3 is a wired over-ear headphone built around an open-back design, a configuration that shapes its acoustic character and suits listening environments where ambient sound is not a concern. It weighs 330 g and comes equipped with a 1.5 m tangle-free cable that is fully detachable, giving users some flexibility in cable management and replacement. The headphone is also usable as a headset, supported by a single microphone and an in-line control panel along the cable.

On the technical side, the Fiio JT3 uses a 50 mm driver unit paired with a neodymium magnet, and operates at an impedance of 80 Ohms, which means it generally pairs better with dedicated amplification than with low-output portable sources. Its frequency range extends from 10 Hz up to 40,000 Hz, and the sound pressure level is rated at 97 dB/mW. The headphone is strictly wired with no USB Type-C port, no active noise cancellation, and no passive noise isolation, consistent with its open-back construction.

Pros
  • The detachable and tangle-free cable makes storage and replacement straightforward
  • The open-back design allows for a more natural acoustic presentation
  • A wide frequency range spanning from 10 Hz to 40,000 Hz covers a broad audio spectrum
  • The in-line control panel allows basic playback management without reaching for a source device
  • Can double as a headset thanks to the built-in microphone, adding everyday versatility
Cons
  • At 80 Ohms impedance, the headphone may not perform optimally when paired with low-output devices
  • No water resistance means it cannot be used in wet or humid outdoor conditions
  • The open-back design offers no passive noise isolation, making it unsuitable for noisy environments
  • No active noise cancellation is available
  • The single microphone lacks noise-canceling capability, which may affect call clarity in louder settings
Who is this for?

The Fiio JT3 suits listeners who prioritize an open, natural acoustic presentation for home or studio use, where ambient noise is not a concern. Its wide frequency range and open-back construction make it well-suited for attentive, focused listening sessions in quiet environments. The built-in microphone and in-line controls also make it practical for users who occasionally need to take calls or manage playback from a desktop setup.

Who is this NOT for?

This headphone is a poor fit for commuters or anyone in noisy public environments, as the open-back design provides no passive noise isolation and there is no active noise cancellation. Users relying solely on smartphones or other low-output portable sources may find that the 80 Ohm impedance results in insufficient volume or diminished performance without additional amplification. It is equally unsuitable for outdoor or active use, given its complete lack of water resistance.

Design:

Fit Over-ear
weight 330 g
has a detachable cable ✓
water resistance None
is designed for kids ✕
has a tangle free cable ✓
has an open-back design ✓
cable length 1.5 m
has stereo speakers ✓

The Fiio JT3 uses an over-ear fit and features an open-back design, which defines its overall physical character and acoustic approach. It weighs 330 g and comes with a 1.5 m cable that is both tangle-free and fully detachable, allowing for easier storage and cable replacement if needed. Stereo speakers are included, while the headphone carries no water resistance rating and is not intended for use by children.

Sound quality:

has active noise cancellation (ANC) ✕
lowest frequency 10 Hz
highest frequency 40000 Hz
driver unit size 50 mm
impedance 80 Ohms
supports spatial audio ✕
sound pressure level 97 dB/mW
has a neodymium magnet ✓
has passive noise reduction ✕

The Fiio JT3 is built around a 50 mm driver unit backed by a neodymium magnet, and covers a frequency range from 10 Hz up to 40,000 Hz. Its impedance sits at 80 Ohms, and the sound pressure level is rated at 97 dB/mW. The headphone does not include active noise cancellation, passive noise isolation, or spatial audio support.

Power:

Has USB Type-C ✕

Connectivity:

connectivity Wired

Features:

has a noise-canceling microphone ✕
has ambient sound mode ✕
has in/on-ear detection ✕
number of microphones 1
has a mute function ✕
can be used as a headset ✓
Has an in-line control panel ✓

The Fiio JT3 can be used as a headset, supported by a single microphone and an in-line control panel on the cable. The microphone does not feature noise-canceling capability, and there is no mute function available. Additional features such as ambient sound mode and in/on-ear detection are not included.

Final Verdict

The Fiio JT3 is a wired over-ear headphone clearly built for the dedicated home listener rather than the on-the-go user. Its open-back design paired with a wide frequency range and 50 mm neodymium-driven driver makes it a capable choice for focused, quiet-environment listening, and the detachable, tangle-free cable adds a degree of practical convenience that extends its day-to-day usability. The 80 Ohm impedance means it works best when paired with appropriate amplification, and the absence of any noise isolation or water resistance keeps its use cases firmly indoors. For users seeking a straightforward wired listening experience at a fixed desk or studio setup, the Fiio JT3 delivers a coherent and well-considered package.