Fossibot S1

The Fossibot S1 has a conventional, non-folding form factor with a height of 176.1 mm and a width of 81.7 mm, while its thickness of 18.5 mm and weight of 380 g give it a relatively substantial physical presence. The device occupies a volume of approximately 266.17 cm³. It does not feature a rugged build and carries no water resistance rating, meaning it offers no certified protection against dust or moisture.

The Fossibot S1 uses an IPS LCD touchscreen measuring 6.74″ with a resolution of 720 x 1620 pixels at a pixel density of 269 ppi. It supports a 120Hz refresh rate and reaches a typical brightness of 480 nits. The display does not include branded damage-resistant glass, and it lacks support for HDR10, HDR10+, or Dolby Vision content. There is no Always-On Display mode and no secondary screen on the device.

The Fossibot S1 is powered by the MediaTek Dimensity 6100 Plus chipset, built on a 6 nm process with an octa-core CPU configuration running at 2 x 2.2 GHz and 6 x 2 GHz using big.LITTLE architecture with HMP support and 8 threads. The SoC integrates an LTE modem, a Mali G57 MC2 GPU clocked at 950 MHz with DirectX 12 support, and handles graphics processing internally. The device comes with 8GB of DDR4 RAM running at 2133 MHz — expandable up to a maximum of 12GB — alongside 256GB of internal storage, and it supports 64-bit processing and multithreading. The AnTuTu benchmark score for this configuration is recorded at 442,500.

The Fossibot S1 features a triple-lens rear camera system with sensors at 50, 8, and 2 megapixels and corresponding apertures of f/1.8, f/2.2, and f/2.4, backed by a CMOS sensor and a dual-tone LED flash with two LEDs. Autofocus options include phase-detection and touch autofocus as well as continuous autofocus during video recording, though laser autofocus is absent, and there is no optical image stabilization. Manual controls cover ISO, exposure, focus, and white balance, while burst mode and in-camera panorama shooting are also supported; raw capture, manual shutter speed, timelapse, and slow-motion video are not available. Video recording tops out at 1080p at 30 fps, with no HDR10 or Dolby Vision recording support. On the front, there is a single 8MP camera with an f/2.2 aperture — it has no LED flash, is not positioned under the display, and is not accompanied by a secondary front lens.

The Fossibot S1 runs Android 14 and includes a broad set of privacy controls, covering clipboard warnings, location privacy options, camera and microphone access management, and the ability to block app tracking, though cross-site tracking blocking and Mail Privacy Protection are not present. On the customization side, the OS supports dark mode, dynamic theming, theme customization, customizable notifications, widgets, and a media picker, while focus modes, app offloading, Wi-Fi password sharing, and Quick Start are unavailable. Usability features include split-screen multitasking, Picture-in-Picture, full-page screenshots, Live Text, sharing intents, a child lock, multi-user support, and the ability to play games while they download. On-device machine learning is supported, alongside offline voice recognition and voice commands, as well as device position tracking and a battery health check tool. OS updates are not delivered directly from the vendor, and the device cannot function as a PC.

The Fossibot S1 is equipped with a 4900 mAh rechargeable battery that supports fast charging at 10W, and a charger is included in the box. A battery level indicator is present, making it easy to monitor remaining charge. The battery is not removable, and wireless charging is not supported.

The Fossibot S1 includes a 3.5 mm headphone jack, offering a wired audio connection option. It does not feature stereo speakers, and there is no radio functionality. On the wireless audio side, none of the high-quality Bluetooth codec standards are supported — aptX, aptX HD, aptX Adaptive, aptX Lossless, and LDAC are all absent.

The Fossibot S1 supports 5G connectivity with a cellular module, accommodates two SIM cards, and reaches download speeds of up to 3300 Mbit/s. Wi-Fi coverage spans Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), and Wi-Fi 6 (802.11ax), while Bluetooth 5.0 and NFC are also on board. The device connects via USB Type-C with USB 2.0, and an external memory slot is available for storage expansion; there is no HDMI output and no DLNA certification. For location and navigation, it includes GPS with Galileo support, a compass, a gyroscope, and an accelerometer, though a barometer, heart rate monitor, infrared sensor, and ANT+ support are all absent. A fingerprint scanner handles biometric authentication, while 3D facial recognition and an iris scanner are not present. Emergency SOS via satellite, crash detection, motion tracking, optical tracking, and a built-in projector are likewise not featured, and no stylus is included.

The Fossibot S1 includes a video light, which can be used to illuminate scenes during video recording. The display is flat rather than curved, and it uses neither sapphire glass nor an e-paper panel.