TurboVS
G.Skill Trident Z5 Neo RGB AMD DDR5-6000 CL26 64GB (2x32GB) specifications and in-depth review

G.Skill Trident Z5 Neo RGB AMD DDR5-6000 CL26 64GB (2x32GB)

Manufacturer: G.Skill

The G.Skill Trident Z5 Neo RGB AMD DDR5-6000 CL26 64GB (2x32GB) is a high-capacity desktop memory kit designed for systems built around the DDR5 platform. It ships as a dual-module set, each stick carrying 32GB, and operates at a tested speed of 6000 MHz under its XMP or EXPO profile. An integrated heatsink and RGB lighting are built into the physical design, and the modules fit a standard 288-pin DIMM socket at a height of 44 mm.

On the timing side, the kit runs with a CAS latency of 26, translating to a true latency of 8.67 ns at its rated speed, while tRCD and tRP are both set at 36 and tRAS sits at 96. The SPD base speed is 4800 MHz, with the 6000 MHz figure achieved through the included Intel XMP 3.0 and AMD EXPO profiles. Operating voltage is rated at 1.45V, ECC is not supported, and the modules do not use Samsung B-Die.

Pros
  • Supports both Intel XMP 3.0 and AMD EXPO profiles, making it compatible with a wide range of platform configurations
  • Total capacity of 64GB across two modules suits workloads that benefit from large memory pools
  • RGB lighting is built in for users who want visual customization in their build
  • An integrated heatsink helps with thermal management during operation
  • True latency of 8.67 ns reflects a well-balanced combination of speed and timings for DDR5
Cons
  • Does not support ECC memory, ruling it out for use cases where error-correcting capability is required
  • Samsung B-Die is not used, which may matter to users who specifically seek that memory configuration
  • At 44 mm tall, the modules may cause clearance issues with certain CPU coolers
  • The SPD base speed of 4800 MHz requires XMP or EXPO to be enabled in the BIOS to reach the rated 6000 MHz, adding a manual configuration step
Who is this for?

This kit is well-suited for users building AMD or Intel DDR5 platforms who want large memory capacity without splitting it across more than two slots, making it a practical choice for content creation, video editing, or other workloads that benefit from 64GB of available RAM. The inclusion of both Intel XMP 3.0 and AMD EXPO profiles means it integrates cleanly into a broad range of modern motherboards with minimal setup friction. Users who also value RGB lighting and an integrated heatsink in their build will find both present without needing third-party additions.

Who is this NOT for?

This kit is not appropriate for environments where ECC memory support is required, such as workstations or servers handling critical data integrity tasks, as that capability is entirely absent. Users who have strict CPU cooler clearance limitations may run into fitment issues given the 44 mm module height. Additionally, those who specifically prioritize Samsung B-Die memory for manual overclocking purposes will need to look elsewhere, as this kit does not use that chip configuration.

Performance:

true latency 8.67 ns
memory speed (Tested Speed) 6000
memory speed (SPD) 4800 MHz
DDR memory version 5
CAS Latency (CL) 26
tRAS timing 96
tRCD timing 36
tRP timing 36

This kit operates on the DDR5 standard and runs at a tested speed of 6000 MHz, well above the SPD base frequency of 4800 MHz. Timings are set at CL26 for the CAS latency, with tRCD and tRP both at 36 and tRAS at 96, producing a true latency of 8.67 ns at the rated speed.

General info:

form factor 288-pin DIMM
memory size (total) 2 x 32GB
has Samsung B-Die ✕
voltage 1.45V
height 44 mm
memory size 32GB

The kit uses a standard 288-pin DIMM form factor and comes as a dual-module set, with each stick carrying 32GB for a combined total of 64GB. The modules stand 44 mm tall and operate at a voltage of 1.45V. Samsung B-Die is not used in this kit.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0, AMD EXPO
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✓

The modules support both Intel XMP 3.0 and AMD EXPO profiles for straightforward frequency and timing configuration. An integrated heatsink is included, and RGB lighting is present on the modules. ECC memory is not supported.

Benchmarks:

Final Verdict

The G.Skill Trident Z5 Neo RGB AMD DDR5-6000 CL26 64GB stands as a capable DDR5 memory kit for users building on modern AMD or Intel platforms who need substantial capacity and straightforward profile-based setup. Its dual-platform XMP 3.0 and EXPO support paired with a 6000 MHz tested speed and 64GB total capacity makes it a well-rounded option for demanding desktop workloads. The absence of ECC support and the reliance on BIOS profile activation to reach rated speeds are practical considerations worth noting, but neither undermines its core value for the mainstream enthusiast or content-focused desktop build. For users whose needs align with its specifications, it delivers a coherent and complete package.