HyperX QuadCast 2

Name: HyperX QuadCast 2
Brand: HyperX
SKU: 6069

Manufacturer: HyperX

The HyperX QuadCast 2 is a USB condenser microphone designed for users who want hands-on control without relying on external audio interfaces. It connects directly via USB and is compatible with Windows, Mac, and Android devices, making it a versatile option across different setups. A built-in mute function and an onboard control panel add convenience during live use, while RGB lighting gives the unit a distinctive visual presence on a desk.

On the technical side, the QuadCast 2 supports 24-bit audio at 96kHz, with a frequency response spanning 20Hz to 20,000Hz and a signal-to-noise ratio of 100dB for both the microphone capsule and the headphone output stage. The microphone handles sound pressure levels up to 122dB and offers four selectable polar patterns — cardioid, omnidirectional, bidirectional, and a fourth option — allowing it to adapt to different recording environments. A 3.5mm headphone jack with 32-ohm impedance support enables direct monitoring, and the package includes both a shock mount and a pop filter. The unit weighs 726g and stands 249mm tall.

Pros

Ships with both a shock mount and pop filter included, removing the need to source these accessories separately
Four selectable polar patterns — cardioid, omnidirectional, and bidirectional — offer flexibility across different recording setups
24-bit resolution at 96kHz sampling rate provides a detailed and clean audio capture
A 3-meter cable offers a reasonable amount of slack for desk or room setups without needing an extension
Direct USB connectivity allows use without an external audio interface
Compatible with Windows, Mac, and Android, covering a broad range of desktop and mobile workflows

Cons

Not compatible with iOS devices, limiting use with iPhones and iPads
No LED sound level indicator, so monitoring input levels requires software instead
Weighing 726g with a volume of 3250.944 cm³, the unit is relatively bulky and heavy for a desktop microphone
Hyper-cardioid polar pattern is not supported, which may matter for users needing tighter directional pickup
No flat DSP mode is available, reducing flexibility for users who prefer unprocessed signal shaping at the hardware level
No 6.35mm headphone jack, restricting direct monitoring to standard 3.5mm headphones only

Who is this for?

This microphone suits users who need a versatile desktop recording solution without additional hardware, as its direct USB connectivity and onboard control panel make setup straightforward across Windows, Mac, and Android systems. The four selectable polar patterns — including cardioid, omnidirectional, and bidirectional — make it a practical choice for podcasters, streamers, or home studio users who record in varied configurations, whether solo, in conversation, or capturing ambient sound. The included shock mount, pop filter, and 3-meter cable further support a ready-to-use desktop setup, while the 24-bit/96kHz audio specification serves those who need a clean, detailed signal without relying on an external audio interface.

Who is this NOT for?

Users who require iOS compatibility will find this microphone unsuitable, as it does not support iPhones or iPads, making it a poor fit for mobile content creators working within Apple's ecosystem. Its weight of 726g and relatively large physical footprint make it less practical for portable or travel-oriented recording scenarios where compactness matters. Additionally, those who need a hyper-cardioid polar pattern for tightly focused directional pickup — common in louder or more acoustically complex environments — will not find that option here, nor will users who rely on hardware-level DSP control, as no flat DSP mode is available on this model.

Sound quality:

Connection	USB
lowest mic frequency	20 Hz
audio interface frequency rate	96kHz
sound pressure level	122dB
highest mic frequency	20000 Hz
audio interface bit rate	24-bit
Signal-to-noise ratio (SNR)	100dB

The HyperX QuadCast 2 connects via USB and captures audio at 24-bit resolution with a 96kHz sampling rate, delivering a clean, detailed signal suitable for demanding recording tasks. Its frequency response runs from 20Hz to 20,000Hz, covering the full range of audible sound, while a signal-to-noise ratio of 100dB ensures minimal background noise in the output. The microphone can handle sound pressure levels up to 122dB, giving it sufficient headroom for louder sound sources without distorting the signal.

Features:

number of polar patterns	4
has cardioid pattern	✓
has a mute function	✓
has omni pattern	✓
Is compatible with Android	✓
Is compatible with iOS	✕
Is compatible with Windows	✓
Is compatible with Mac OS X	✓
has hyper-cardioid pattern	✕
has flat DSP mode	✕
has bidirectional pattern	✓

The HyperX QuadCast 2 offers four selectable polar patterns — cardioid, omnidirectional, and bidirectional are included, while hyper-cardioid is not supported — allowing the microphone to be configured for a range of recording situations. A built-in mute function provides quick control over the audio signal without adjusting software settings. In terms of platform compatibility, the microphone works with Windows, Mac OS X, and Android devices, though it is not compatible with iOS. There is no flat DSP mode available on this model.

Headphone output:

has a socket for a 3.5 mm audio jack	✓
lowest frequency	20 Hz
highest frequency	20000 Hz
Signal-to-Noise ratio (DAC)	100 dB
impedance	32 Ohms
Has a connector for a 6.35 mm audio jack	✕

The HyperX QuadCast 2 includes a 3.5mm headphone jack for direct audio monitoring, while a 6.35mm connector is not available on this model. The headphone output covers a frequency range of 20Hz to 20,000Hz and delivers a signal-to-noise ratio of 100dB through its DAC stage, keeping the audio path clean. It is rated for headphones with an impedance of 32 Ohms, which aligns with the majority of consumer headphones commonly used for monitoring purposes.

Design:

shock mount included	✓
pop filter included	✓
control panel placed on a device	✓
Has LED sound level indicator	✕
cable length	3 m
has RGB lighting	✓
has an integrated touchpad	✕
volume	3250.944 cm³
weight	726 g
height	249 mm
thickness	102 mm
width	128 mm

The HyperX QuadCast 2 comes with both a shock mount and a pop filter included, reducing the need for additional accessories out of the box. An onboard control panel sits directly on the device, and RGB lighting adds a visual element to the build, though there is no LED sound level indicator or integrated touchpad. The included cable measures 3 meters in length. Physically, the microphone stands 249mm tall, spans 128mm in width, and measures 102mm in thickness, with a total volume of 3250.944 cm³ and a weight of 726g.

Final Verdict

The HyperX QuadCast 2 is a well-specified USB microphone that brings together a practical feature set for desktop recording without requiring additional hardware. Its 24-bit/96kHz audio capture with four selectable polar patterns makes it a capable option for podcasters, streamers, and home studio users who want flexibility in a single device. The inclusion of a shock mount, pop filter, and onboard controls adds real convenience, though the lack of iOS support and the unit's considerable size and weight do narrow its appeal for users with mobile or travel-based workflows. For those working on Windows, Mac, or Android in a fixed desktop environment, the QuadCast 2 delivers a coherent and complete recording setup.