TurboVS
ID-Cooling DX240 Max specifications and in-depth review

ID-Cooling DX240 Max

Manufacturer: ID-Cooling

The ID-Cooling DX240 Max is a 240 mm all-in-one liquid cooler designed for users who want a compact, closed-loop cooling solution with broad CPU socket support. It covers a wide range of Intel platforms including LGA 1851, LGA 1700, LGA 1200, and several LGA 115x variants, as well as AMD AM4 and AM5 sockets, making it a versatile option across many system builds. The cooler ships with thermal paste included and features RGB lighting on its components for those who want visual customization alongside functional cooling.

The DX240 Max uses a dual-fan setup, with each fan capable of reaching 2150 rpm and delivering up to 85 CFM of airflow. Noise output ranges from 16 dB at the low end to 32.5 dB at maximum load, while the pump operates at up to 2900 rpm. The radiator measures 280 mm in length and 120 mm in width, with a 38 mm thickness, and the water block itself has a footprint of 72 × 73 mm at a height of 58 mm. Fan longevity is supported by fluid dynamic bearings, and the unit carries a one-year warranty. Total weight comes in at 2230 g.

Pros
  • Supports a wide range of CPU sockets across both Intel and AMD platforms, including LGA 1851, LGA 1700, AM4, and AM5
  • Fluid dynamic bearings on the fans contribute to quieter and more durable long-term operation
  • Minimum noise output of 16 dB makes it relatively unobtrusive during light workloads
  • Thermal paste is included in the box, allowing for a complete installation without additional purchases
  • RGB lighting is built in, offering visual customization without requiring separate components
Cons
  • Warranty period is limited to just one year, which is shorter than many coolers in this category
  • At 2230 g, the total weight is considerable and may place noticeable stress on the motherboard during transport or in non-upright orientations
  • Maximum noise level of 32.5 dB at full fan speed may be noticeable in quiet environments
  • No built-in display, so there is no way to monitor temperatures or pump status directly on the unit
Who is this for?

This cooler is a practical choice for builders working across multiple platform generations, given its compatibility with a broad spread of Intel and AMD sockets including LGA 1851, AM5, and several older variants. Its low minimum noise output of 16 dB makes it well suited to quiet or home office environments where fan noise during light workloads would be distracting. The inclusion of RGB lighting and a 240 mm radiator also makes it a reasonable fit for mid-tower builds where aesthetics and thermal headroom both matter without requiring an oversized 360 mm solution.

Who is this NOT for?

Users who need to move or transport their system frequently may find the 2230 g total weight a concern, as the added mass can put stress on the motherboard if the system is not handled carefully. Those who want to monitor coolant or system temperatures at a glance will be disappointed, since the unit lacks any built-in display. The one-year warranty also makes it a less reassuring long-term option for users who prioritize extended coverage on liquid cooling components, where pump or seal failures can occasionally surface after extended use.

Cooling:

Cooling type AIO liquid
Max fan RPM 2150 rpm
Max pump RPM 2900 rpm
Max airflow 85 CFM
Number of fans 2

The DX240 Max uses an AIO liquid cooling setup with two fans that spin at up to 2150 rpm, collectively moving as much as 85 CFM of airflow through the system. The pump reaches a maximum speed of 2900 rpm, ensuring steady coolant circulation throughout the loop under varying thermal loads.

Dimensions:

Heatsink/water block height 58 mm
Heatsink/water block width 72 mm
Heatsink/water block depth 73 mm
Radiator size 240 mm
Radiator height 38 mm
Radiator length 280 mm
Radiator width 120 mm

The water block has a height of 58 mm, a width of 72 mm, and a depth of 73 mm, giving it a compact footprint that should fit comfortably over most mainstream CPU sockets. The 240 mm radiator measures 280 mm in length and 120 mm in width, with a 38 mm thickness that provides a reasonable fin stack depth for heat dissipation without demanding excessive case clearance.

General info:

CPU socket LGA 1851, LGA 1700, LGA 1200, LGA 1151, LGA 1150, LGA 1155, AM4, AM5
Audible noise (min) 16 dB
Audible noise (max) 32.5 dB
weight 2230 g
warranty period 1 years

This cooler is compatible with a broad range of CPU sockets, covering Intel LGA 1851, LGA 1700, LGA 1200, LGA 1151, LGA 1150, and LGA 1155, as well as AMD AM4 and AM5, making it suitable for a wide variety of platforms. Audible noise ranges from 16 dB at its quietest to 32.5 dB at full speed, and the unit weighs 2230 g in total. It comes with a one-year warranty.

Features:

Fan bearings Fluid dynamic bearings
has RGB lighting ✓
Thermal paste Included
Has a display ✕

The fans run on fluid dynamic bearings, which generally contribute to quieter operation and longer bearing life over time. RGB lighting is included, adding visual customization to the build, and thermal paste comes in the box, so no separate purchase is needed before installation. The cooler does not feature a built-in display.

Final Verdict

The ID-Cooling DX240 Max is a 240 mm AIO liquid cooler that covers a genuinely broad range of platforms, from current-generation Intel LGA 1851 and AMD AM5 sockets down through several older variants, making it a versatile option for builders who work across different hardware generations. Its fluid dynamic bearing fans and low minimum noise floor of 16 dB reflect a design that balances everyday usability with thermal capability, while the included thermal paste and RGB lighting round out a reasonably complete package. The one-year warranty and 2230 g weight are worth factoring in depending on the build context, but for a standard mid-tower desktop intended for sustained stationary use, the DX240 Max delivers a coherent and well-specified cooling solution.