TurboVS
ID-Cooling SE-610-XT Basic specifications and in-depth review

ID-Cooling SE-610-XT Basic

Manufacturer: ID-Cooling

The ID-Cooling SE-610-XT Basic is an air-based CPU cooler designed to cover a broad range of modern Intel and AMD platforms, including LGA 1851, LGA 1700, AM4, and AM5. Weighing 900 g, it carries a reasonably solid build for its class, and its fluid dynamic bearing fan contributes to smooth, consistent operation over time. Thermal paste is included in the box, and the cooler backs its components with a three-year warranty.

On the performance side, the fan spins up to 2000 RPM and moves up to 78.25 CFM of airflow, while keeping audible noise between 16 dB at its quietest and 29.85 dB at full speed. The heatsink measures 151 mm in height, 94 mm in width, and 128 mm in depth, giving a sense of its physical footprint inside a chassis. The cooler ships without RGB lighting or any integrated display, keeping its feature set focused on straightforward thermal management.

Pros
  • Supports a wide range of CPU sockets across both Intel and AMD platforms, including LGA 1851, LGA 1700, AM4, and AM5
  • Fluid dynamic bearings contribute to quieter and more durable fan operation over extended use
  • Minimum noise level of 16 dB makes it unobtrusive during low-load scenarios
  • Thermal paste is included, allowing installation without needing additional accessories
  • Backed by a 3-year warranty
Cons
  • At 151 mm tall, clearance inside compact or small form factor cases may be a concern
  • No RGB lighting for users who prefer a visually coordinated build
  • Single fan configuration limits airflow redundancy compared to multi-fan tower designs
  • Maximum noise level of 29.85 dB under full load may be noticeable in quiet environments
Who is this for?

This cooler is a practical choice for users building standard desktop systems on a budget of space and simplicity, particularly those running Intel or AMD mainstream platforms such as LGA 1700, AM4, or AM5. Its noise floor of 16 dB and fluid dynamic bearings make it well-suited for quiet or office environments where low idle noise matters. Users who prefer a no-frills setup without RGB lighting or extra displays will also find its straightforward feature set a good fit, and the included thermal paste makes it convenient for those assembling a system from scratch.

Who is this NOT for?

Users working with thermally demanding workloads such as sustained heavy rendering or overclocking may find a single-fan air cooler with this airflow capacity insufficient to maintain comfortable temperatures under prolonged stress. The 151 mm heatsink height can also pose clearance problems in small form factor or low-profile cases where vertical space is limited. Additionally, enthusiasts looking to build a visually coordinated system with RGB accents will find this cooler unsuitable, as it ships with no lighting features whatsoever.

Cooling:

Cooling type Air
Max fan RPM 2000 rpm
Max airflow 78.25 CFM
Number of fans 1

The SE-610-XT Basic uses air cooling and is equipped with a single fan that spins at up to 2000 RPM, delivering a maximum airflow of 78.25 CFM to move heat away from the processor.

Dimensions:

Heatsink/water block height 151 mm
Heatsink/water block width 94 mm
Heatsink/water block depth 128 mm

The heatsink stands at a height of 151 mm, with a width of 94 mm and a depth of 128 mm, giving a clear picture of the physical space it occupies inside a case.

General info:

CPU socket LGA 1851, LGA 1700, LGA 1200, LGA 1150, LGA 1151, LGA 1155, AM4, AM5
Audible noise (min) 16 dB
Audible noise (max) 29.85 dB
weight 900 g
warranty period 3 years

This cooler is compatible with a wide range of CPU sockets, covering Intel LGA 1851, LGA 1700, LGA 1200, LGA 1150, LGA 1151, and LGA 1155, as well as AMD AM4 and AM5. Audible noise ranges from 16 dB at its lowest to 29.85 dB at full load, and the unit weighs 900 g. A 3-year warranty is included with the product.

Features:

Fan bearings Fluid dynamic bearings
has RGB lighting ✕
Thermal paste Included
Has a display ✕

The fan uses fluid dynamic bearings, which support smooth and consistent operation over time. Thermal paste is included in the package, so no separate purchase is needed before installation. The cooler does not feature RGB lighting or an integrated display, keeping the design straightforward and focused on function.

Final Verdict

The ID-Cooling SE-610-XT Basic presents itself as a no-nonsense air CPU cooler that covers the essentials well — broad socket compatibility spanning current Intel and AMD platforms, a quiet idle noise floor, and a fan built around fluid dynamic bearings for reliable long-term operation. It suits straightforward system builds where simplicity and low ambient noise take priority, though users with thermally intensive workloads or tight chassis constraints should weigh its single-fan configuration and 151 mm height carefully. For those seeking a clean, functional cooling solution without unnecessary extras, the SE-610-XT Basic delivers a coherent and dependable package.