TurboVS
ID-Cooling SE-902-SD V3 specifications and in-depth review

ID-Cooling SE-902-SD V3

Manufacturer: ID-Cooling

The ID-Cooling SE-902-SD V3 is a compact air CPU cooler designed to fit a broad range of modern desktop platforms. With a heatsink footprint of 120 x 70 x 90 mm and a total weight of 370 g, it occupies minimal space inside a system while still covering an extensive list of Intel and AMD sockets. Thermal paste is included in the package, and the cooler ships with a one-year warranty.

Cooling is handled by a single fan capable of reaching 2000 RPM and delivering up to 37.44 CFM of airflow, with audible noise ranging from 16 dB at its quietest to 23.1 dB under full load. The fan runs on fluid dynamic bearings, which generally contribute to smoother and quieter operation over time. The cooler carries no RGB lighting or integrated display, keeping the feature set focused purely on thermal performance. Compatible sockets include LGA 1851, LGA 1700, LGA 1200, LGA 1151, LGA 1155, LGA 1150, AM4, and AM5.

Pros
  • Supports a wide range of Intel and AMD sockets, including LGA 1851, LGA 1700, AM4, and AM5
  • Fluid dynamic bearings contribute to quieter and smoother fan operation
  • Noise output tops out at 23.1 dB, keeping the cooler relatively unobtrusive under load
  • Thermal paste is included, allowing for a straightforward installation without additional purchases
  • Compact heatsink dimensions of 120 x 70 x 90 mm make it suitable for builds with limited clearance
Cons
  • Single fan configuration limits airflow redundancy
  • Maximum airflow of 37.44 CFM is modest for demanding thermal scenarios
  • Warranty coverage is limited to one year
  • No RGB lighting for users who prefer visual customization in their build
Who is this for?

This cooler is a practical choice for users building or maintaining a compact or mid-range desktop system where thermal demands are moderate and physical space around the CPU socket is limited. Its broad socket compatibility — spanning current platforms like LGA 1851, AM5, and AM4 alongside older Intel sockets — makes it well-suited for system builders working across multiple generations of hardware. The inclusion of thermal paste and the cooler's low minimum noise of 16 dB also make it a reasonable fit for quiet, everyday computing environments such as home offices or light workstations.

Who is this NOT for?

Users running thermally demanding workloads such as sustained rendering, heavy compilation, or overclocking are unlikely to find adequate headroom with a single fan delivering a maximum of 37.44 CFM. The compact heatsink dimensions further limit its ability to dissipate significant heat loads over extended periods. Similarly, builders focused on aesthetics or visual customization will find the absence of RGB lighting and any integrated display a drawback. The one-year warranty may also be a concern for those seeking longer-term coverage on a system component intended for continuous use.

Cooling:

Cooling type Air
Max fan RPM 200 rpm
Max airflow 37.44 CFM
Number of fans 1

The cooling section of this unit relies on a single air-based fan to manage heat dissipation. The fan reaches a maximum speed of 200 RPM and is capable of delivering up to 37.44 CFM of airflow, providing a defined level of active ventilation within the supported thermal envelope.

Dimensions:

Heatsink/water block height 120 mm
Heatsink/water block width 70 mm
Heatsink/water block depth 90 mm

The heatsink measures 120 mm in height, 70 mm in width, and 90 mm in depth, giving it a relatively compact physical footprint that reflects its suitability for builds where available clearance around the CPU socket may be a consideration.

General info:

CPU socket LGA 1851, LGA 1700, LGA 1200, LGA 1151, LGA 1155, LGA 1150, AM4, AM5
Audible noise (min) 16 dB
Audible noise (max) 23.1 dB
weight 370 g
warranty period 1 years

This cooler is compatible with a wide range of sockets, covering Intel LGA 1851, LGA 1700, LGA 1200, LGA 1151, LGA 1155, and LGA 1150, as well as AMD AM4 and AM5. Audible noise sits between 16 dB at minimum and 23.1 dB at maximum, keeping operational sound within a modest range. The unit weighs 370 g and comes backed by a one-year warranty.

Features:

Fan bearings Fluid dynamic bearings
has RGB lighting ✕
Thermal paste Included
Has a display ✕

The fan uses fluid dynamic bearings, which support smoother rotation during operation. Thermal paste is included in the package, so no separate purchase is required before installation. The cooler does not feature RGB lighting or an integrated display, keeping the design straightforward and focused on function.

Final Verdict

The ID-Cooling SE-902-SD V3 is a no-frills air CPU cooler that delivers where it matters most for everyday desktop use — broad platform compatibility and quiet operation. Its fluid dynamic bearing fan keeps noise levels well within acceptable limits, and the compact heatsink footprint makes it a practical fit for a variety of chassis configurations. While its thermal headroom is suited to moderate workloads rather than demanding or overclocked systems, users who need a reliable, low-noise cooler compatible with both current and previous-generation Intel and AMD platforms will find it a dependable choice for that purpose.