TurboVS
iiyama Prolite TW1623AS-B1P 16" specifications and in-depth review

iiyama Prolite TW1623AS-B1P 16"

Manufacturer: iiyama

The iiyama Prolite TW1623AS-B1P is a 15.6-inch standard monitor built around an IPS panel with LED backlighting, offering a touch-enabled display suited for interactive use cases. It carries a compact form factor weighing 1,500 g with a thickness of just 30 mm, and supports both tilt adjustment and portrait mode orientation, along with VESA mounting for flexible placement options.

The panel runs at a native 1920 x 1080 resolution at 60 Hz with a pixel density of 141 ppi, an 8-bit color depth covering 16.7 million colors, and a contrast ratio of 1000:1 at a typical brightness of 450 nits. Horizontal and vertical viewing angles each reach 170 degrees. Connectivity includes one HDMI port, three USB ports, a 3.5 mm audio jack, and Ethernet support, while built-in stereo speakers deliver 2 x 2W of audio output. Operating power consumption is rated at 24W with a 0.5W standby draw.

Pros
  • Touch screen support adds interactive functionality without requiring additional hardware
  • Wide 170-degree viewing angles both horizontally and vertically make the screen usable from off-center positions
  • VESA mount support combined with portrait mode capability allows flexible placement options beyond a standard desk setup
  • Ethernet connectivity provides a wired network connection directly through the monitor
  • Built-in stereo speakers remove the need for separate audio equipment in basic setups
  • Tilt adjustment and portrait mode support offer meaningful ergonomic and orientation flexibility
Cons
  • A 30 ms response time is relatively slow and may result in visible motion blur during fast-moving content
  • The 60 Hz refresh rate with no adaptive synchronization offers limited smoothness for dynamic on-screen motion
  • No USB Type-C or DisplayPort outputs restricts compatibility with modern devices that rely on these connections
  • Color calibration is not supported, limiting its suitability for color-accurate work
  • No swivel stand reduces horizontal positioning flexibility without the use of a third-party mount
  • Wi-Fi is not supported, so a physical network connection is required for Ethernet functionality
Who is this for?

This monitor is well suited to users who need an interactive touch-enabled display in a compact, lightweight form — such as point-of-sale setups, reception desks, or light office workstations. Its VESA mount compatibility and portrait mode support make it a practical fit for wall-mounted or kiosk-style installations where space is limited. The inclusion of Ethernet, three USB ports, and built-in stereo speakers also makes it a reasonable all-in-one solution for environments where a clean, cable-managed desk setup is preferred.

Who is this NOT for?

Users who require smooth, fluid visuals will find this monitor lacking, as the 30 ms response time and 60 Hz refresh rate with no adaptive synchronization are ill-suited to gaming or any application where motion clarity matters. It is equally unsuitable for color-critical work such as photo editing or graphic design, given the absence of color calibration support. Those relying on modern connectivity standards will also face limitations, as there is no USB Type-C, DisplayPort, or Wi-Fi support.

Display:

Display type IPS, LCD, LED-backlit
response time 30 ms
screen size 15.6"
resolution 1920 x 1080 px
pixel density 141 ppi
Adaptive synchronization None
refresh rate 60Hz
maximum horizontal viewing angle 170º
maximum vertical viewing angle 170º
has a touch screen ✓

The display uses an IPS panel with LED backlighting, delivering a 1920 x 1080 px resolution across a 15.6-inch screen at a pixel density of 141 ppi and a 60 Hz refresh rate. Both horizontal and vertical viewing angles extend to 170 degrees, and the screen supports touch input. The response time is rated at 30 ms, and no adaptive synchronization technology is included.

General info:

Type Standard
supports total tilt ✓
Has a swivel stand ✕
Supports VESA mount ✓
height 244 mm
width 387 mm
thickness 30 mm
weight 1500 g
supports portrait mode ✓
volume 2832.84 cm³

This is a standard-type monitor measuring 387 mm wide, 244 mm tall, and 30 mm thick, with a weight of 1,500 g and a volume of 2,832.84 cm³. It supports VESA mounting and offers tilt adjustment as well as portrait mode orientation, giving reasonable flexibility in how it can be positioned. A swivel stand is not included. Portrait mode capability combined with VESA support makes it adaptable to a range of desk or wall-mounted setups.

Colors:

brightness (typical) 450 nits
supports color calibration ✕
display colors 16.7 million
bit depth 8-bit
contrast ratio 1000:1

The display produces 16.7 million colors through an 8-bit panel, with a typical brightness of 450 nits and a contrast ratio of 1000:1. These figures describe a screen capable of rendering a broad color range at a solid luminance level for a variety of lighting conditions. Color calibration is not supported on this model.

Connectivity:

HDMI ports 1
supports Thunderbolt ✕
DisplayPort outputs 0
has a socket for a 3.5 mm audio jack ✓
has a DVI connector ✕
USB ports 3
Has USB Type-C ✕
supports Ethernet ✓
supports Wi-Fi ✕
has AirPlay ✕
mini DisplayPort outputs 0
has a VGA connector ✕

Connectivity options include one HDMI port, three USB ports, a 3.5 mm audio jack, and Ethernet support for wired network access. There are no DisplayPort, mini DisplayPort, DVI, VGA, or USB Type-C outputs, and the monitor does not support Thunderbolt, Wi-Fi, or AirPlay.

Power:

operating power consumption 24W
standby power consumption 0.5W

The monitor draws 24W during normal operation and drops to a low 0.5W in standby mode, reflecting a modest power profile across both active and idle states.

Features:

has PiP ✕
has stereo speakers ✓
has built-in smart TV ✕
audio output power 2 x 2W
has a remote control ✕
supports Dolby Digital ✕
supports Dolby Digital Plus ✕
has DTS Surround ✕
has an ambient light sensor ✕
has a front camera ✕

The monitor includes built-in stereo speakers rated at 2 x 2W, providing basic audio output without the need for external speakers. It does not support Dolby Digital, Dolby Digital Plus, or DTS Surround, and there is no remote control, ambient light sensor, or front camera. PiP (Picture-in-Picture) and smart TV functionality are also absent from this model.

Final Verdict

The iiyama Prolite TW1623AS-B1P is a compact, purpose-built monitor that makes the most sense in structured environments where touch interactivity and flexible mounting are more important than display performance. Its IPS panel, wide viewing angles, Ethernet connectivity, and portrait mode support give it a practical edge in kiosk, point-of-sale, or fixed workstation setups. That said, its 30 ms response time, 60 Hz refresh rate, and lack of color calibration place clear limits on what it can deliver for performance-oriented or color-sensitive tasks. For the right deployment scenario, it holds up as a functionally coherent and well-specified display; for general or demanding use, its technical ceiling will become apparent fairly quickly.