TurboVS
iiyama Prolite XU2793QS-B7 27" specifications and in-depth review

iiyama Prolite XU2793QS-B7 27"

Manufacturer: iiyama

The iiyama Prolite XU2793QS-B7 is a 27-inch IPS monitor designed for everyday desktop use, combining a sharp QHD resolution with a clean, matte finish that reduces reflections in typical office or home environments. Built around an LED-backlit LCD panel, it delivers 2560 x 1440 pixel resolution at 108 ppi, providing noticeably more detail than a standard 1080p display at this screen size.

The panel runs at a 100Hz refresh rate with a 1ms response time and offers wide viewing angles of 178 degrees both horizontally and vertically. Brightness is rated at 300 nits with a contrast ratio of 1300:1 and support for 16.7 million colors. Connectivity includes one HDMI 2.0 port, one DisplayPort output, and a 3.5mm audio jack, while built-in stereo speakers provide 2 x 2W of audio output. The monitor supports VESA mounting and tilt adjustment, weighs 4100g, and has an operating power consumption of 22W.

Pros
  • The IPS panel delivers wide 178-degree viewing angles both horizontally and vertically, making the image consistent from most positions
  • A matte, anti-glare coating helps reduce reflections without needing a glossy surface
  • VESA mount support and tilt adjustment offer flexible placement and positioning options
  • The QHD resolution of 2560 x 1440 pixels across 27 inches provides noticeably more screen detail than standard 1080p at this size
  • Built-in stereo speakers remove the need for separate audio hardware in simple setups
  • Standby power consumption of just 0.5W keeps idle energy use low
Cons
  • No adaptive synchronization support, which can result in screen tearing during fast-moving content
  • The stand does not support swivel or portrait mode, limiting ergonomic flexibility
  • No USB ports of any kind, including USB Type-C, restricting peripheral connectivity
  • Color calibration is not supported, which may be a limitation for color-sensitive work
  • The EU energy label of E indicates relatively lower energy efficiency
  • No ambient light sensor means brightness cannot adjust automatically to room conditions
Who is this for?

This monitor is well-suited to everyday office and productivity use, where its QHD resolution of 2560 x 1440 pixels on a 27-inch matte panel provides a clear, detail-rich workspace with reduced reflections. The wide 178-degree viewing angles make it a practical choice for desk setups where the screen may be viewed from slightly off-center. Users who want a clean desktop without separate speakers will appreciate the built-in stereo speakers, and the VESA mount support makes it easy to integrate into monitor arm or wall-mount configurations for a tidier workstation.

Who is this NOT for?

Users looking for a monitor for competitive or fast-paced gaming will find the lack of adaptive synchronization a notable drawback, as screen tearing can be an issue without it. The limited ergonomic range — no swivel and no portrait mode — makes it less suited to multi-monitor or vertical workflow setups that require more physical flexibility. Creative professionals who need accurate, calibrated color output will also find this monitor lacking, as it does not support color calibration and carries no specific color accuracy specifications suited to demanding visual work.

Display:

Display type IPS, LCD, LED-backlit
response time 1 ms
screen size 27"
resolution 2560 x 1440 px
pixel density 108 ppi
Adaptive synchronization None
has anti-glare coating ✓
refresh rate 100Hz
maximum horizontal viewing angle 178º
maximum vertical viewing angle 178º
has a matte panel ✓
has a glossy panel ✕
has a touch screen ✕

The display uses an IPS LCD panel with LED backlighting, sized at 27 inches and delivering a 2560 x 1440 pixel resolution at a pixel density of 108 ppi. It runs at a 100Hz refresh rate with a 1ms response time, and both horizontal and vertical viewing angles reach 178 degrees. The panel has a matte, anti-glare coating and does not have a glossy finish or touch screen functionality. Adaptive synchronization is not supported.

General info:

Type Standard
EU energy label E
supports total tilt ✓
Has a swivel stand ✕
Supports VESA mount ✓
height 435 mm
width 613 mm
thickness 189 mm
weight 4100 g
supports portrait mode ✕
volume 50397.795 cm³

This is a standard-type monitor with a VESA mount and tilt adjustment support, though it does not have a swivel stand or portrait mode capability. It carries an EU energy label of E. The physical dimensions are 613 mm wide, 435 mm tall, and 189 mm deep, with a total weight of 4100 g.

Colors:

brightness (typical) 300 nits
supports color calibration ✕
display colors 16.7 million
contrast ratio 1300:1

The display has a typical brightness of 300 nits and a contrast ratio of 1300:1, with support for 16.7 million colors. Color calibration is not supported on this monitor.

Connectivity:

HDMI ports 1
supports Thunderbolt ✕
DisplayPort outputs 1
has a socket for a 3.5 mm audio jack ✓
has a DVI connector ✕
USB ports 0
Has USB Type-C ✕
HDMI version HDMI 2.0
supports Ethernet ✕
supports Wi-Fi ✕
has AirPlay ✕
mini DisplayPort outputs 0
has a VGA connector ✕

Connectivity options include one HDMI 2.0 port, one DisplayPort output, and a 3.5mm audio jack. There are no USB ports, and the monitor does not support USB Type-C, Thunderbolt, DVI, VGA, mini DisplayPort, Ethernet, Wi-Fi, or AirPlay.

Power:

operating power consumption 22W
standby power consumption 0.5W

The monitor draws 22W during normal operation and drops to just 0.5W in standby mode.

Features:

has PiP ✕
has stereo speakers ✓
has built-in smart TV ✕
audio output power 2 x 2W
has a remote control ✕
supports Dolby Digital ✕
supports Dolby Digital Plus ✕
has DTS Surround ✕
has an ambient light sensor ✕
has a front camera ✕

The monitor includes built-in stereo speakers with a total audio output of 2 x 2W, but does not support Dolby Digital, Dolby Digital Plus, or DTS Surround. There is no PiP functionality, remote control, ambient light sensor, front camera, or built-in smart TV capability.

Final Verdict

The iiyama Prolite XU2793QS-B7 is a straightforward 27-inch IPS monitor that delivers on the essentials for everyday desktop use — its 2560 x 1440 resolution with a matte anti-glare panel makes it a practical choice for users who spend long hours working at a desk and want a clean, detailed image without fuss. The inclusion of VESA mount support, built-in speakers, and wide viewing angles adds everyday convenience, though the absence of adaptive sync, limited ergonomic adjustability, and no color calibration support mean it is best positioned for general productivity rather than gaming or professional creative work. For users whose needs align with that scope, it covers the core bases reliably.

Popular Comparisons

iiyama Prolite XU2793QS-B7 27"
iiyama Prolite XU2793QS-B7 27"
VS
iiyama G-Master GB2745HSU-B2 Black Hawk 27"
iiyama G-Master GB2745HSU-B2 Black Hawk 27"
iiyama Prolite XU2793QS-B7 27"
iiyama Prolite XU2793QS-B7 27"
VS
iiyama Prolite XUB2793HSU-B6 27"
iiyama Prolite XUB2793HSU-B6 27"