TurboVS
iiyama Prolite XUB2793HS-B6 27" specifications and in-depth review

iiyama Prolite XUB2793HS-B6 27"

Manufacturer: iiyama

The iiyama Prolite XUB2793HS-B6 is a 27-inch standard IPS monitor designed for everyday desktop use. It uses an LED-backlit IPS panel with a matte, anti-glare surface and delivers a 1ms response time at 100Hz, making it a capable option for users who need both color accuracy and fluid motion in a single display. The stand supports tilt and swivel adjustments, and VESA mount compatibility is included for those who prefer an alternative mounting solution.

The panel resolves at 1920 x 1080 pixels with a pixel density of 81 ppi, covers 96% of the sRGB color space, and renders up to 16.7 million colors at a typical brightness of 250 nits and a contrast ratio of 1000:1. Viewing angles reach 178 degrees in both directions. On the connectivity side, the monitor includes one HDMI port and one DisplayPort output, along with a 3.5mm audio jack. Built-in stereo speakers are rated at 2 x 2W. There are no USB ports, no USB-C, and no wireless connectivity of any kind. Operating power consumption is rated at 22W, with standby draw at 0.5W.

Pros
  • The IPS panel with a matte, anti-glare surface keeps reflections under control in typical office or home lighting conditions
  • A 1ms response time at 100Hz makes the display suitable for users who need both smooth motion and accurate colors in a single monitor
  • Wide 178-degree viewing angles in both directions ensure consistent image quality from off-center positions
  • 96% sRGB coverage makes the display reasonably well-suited for color-sensitive work within the sRGB color space
  • Tilt and swivel stand adjustments allow for ergonomic positioning without requiring a third-party mount
  • Operating power draw of just 22W keeps energy consumption low during extended use
Cons
  • Resolution is limited to 1920 x 1080 pixels on a 27-inch panel, resulting in a relatively low pixel density of 81 ppi
  • No USB ports of any kind are available, limiting peripheral connectivity directly through the monitor
  • Portrait mode is not supported, restricting flexibility for users who rotate their displays vertically
  • Color calibration is not supported, which may be a drawback for users who require precise color accuracy
  • Built-in speakers are rated at only 2 x 2W with no support for Dolby Digital, DTS Surround, or similar audio formats
  • There is no front camera, ambient light sensor, or remote control included
Who is this for?

The iiyama Prolite XUB2793HS-B6 is a solid fit for office and general productivity users who need a reliable, ergonomically adjustable display for daily work. The IPS panel with a matte anti-glare surface handles mixed lighting environments well, and the tilt and swivel stand gives users reasonable flexibility in positioning without additional hardware. The 100Hz refresh rate with a 1ms response time also makes it a workable option for casual gaming or multimedia use where fluid motion matters alongside color accuracy. Users working within the sRGB color space will benefit from the 96% sRGB coverage for tasks such as basic photo editing or design review.

Who is this NOT for?

Users who rely on a monitor as a USB hub will find this display limiting, as it offers no USB ports whatsoever, including no USB-C. Creative professionals who require strict color accuracy will also be restricted by the absence of color calibration support. At 1920 x 1080 pixels across a 27-inch panel, the pixel density of 81 ppi may feel insufficiently sharp for users accustomed to higher-resolution displays, particularly for detailed image work or dense text rendering. Additionally, the lack of portrait mode support makes it unsuitable for users who rotate their monitor for reading or coding workflows.

Display:

Display type IPS, LCD, LED-backlit
response time 1 ms
screen size 27"
resolution 1920 x 1080 px
pixel density 81 ppi
has anti-glare coating ✓
refresh rate 100Hz
maximum horizontal viewing angle 178º
maximum vertical viewing angle 178º
has a matte panel ✓
has a glossy panel ✕
has a touch screen ✕

This 27-inch monitor uses an IPS LCD panel with LED backlighting, delivering a resolution of 1920 x 1080 pixels at 81 ppi. It runs at 100Hz with a 1ms response time, and viewing angles extend to 178 degrees both horizontally and vertically. The surface is matte with an anti-glare coating, which helps reduce reflections in bright environments. Touch screen functionality is not available, and the panel is not glossy.

General info:

Type Standard
EU energy label E
supports total tilt ✓
Has a swivel stand ✓
Supports VESA mount ✓
height 400.5 mm
width 611.5 mm
thickness 209.5 mm
weight 5400 g
supports portrait mode ✕
volume 51307.754625 cm³

This is a standard-type monitor with physical dimensions of 611.5 mm wide, 400.5 mm tall, and 209.5 mm deep, weighing 5400 g. The stand supports both tilt and swivel adjustments, and VESA mount compatibility is included for alternative mounting setups. Portrait mode is not supported. The monitor carries an EU energy label of E.

Colors:

brightness (typical) 250 nits
supports color calibration ✕
display colors 16.7 million
contrast ratio 1000:1
sRGB coverage 96%

The display produces up to 16.7 million colors with a typical brightness of 250 nits and a contrast ratio of 1000:1. sRGB coverage reaches 96%, making it a reasonable fit for color-sensitive work within the sRGB color space. Color calibration is not supported on this model.

Connectivity:

HDMI ports 1
supports Thunderbolt ✕
DisplayPort outputs 1
has a socket for a 3.5 mm audio jack ✓
has a DVI connector ✕
USB ports 0
Has USB Type-C ✕
supports Ethernet ✕
supports Wi-Fi ✕
has AirPlay ✕
mini DisplayPort outputs 0
has a VGA connector ✕

Connectivity is straightforward, with one HDMI port and one DisplayPort output available for video input, alongside a 3.5mm audio jack. There are no USB ports of any kind, and USB-C and Thunderbolt are both absent. The monitor does not support Wi-Fi, Ethernet, AirPlay, or any wireless connectivity, and there is no DVI, VGA, or mini DisplayPort connection either.

Power:

operating power consumption 22W
standby power consumption 0.5W

The monitor draws 22W during normal operation and drops to 0.5W in standby, keeping idle energy consumption very low.

Features:

has PiP ✕
has stereo speakers ✓
has built-in smart TV ✕
audio output power 2 x 2W
has a remote control ✕
supports Dolby Digital ✕
supports Dolby Digital Plus ✕
has DTS Surround ✕
has an ambient light sensor ✕
has a front camera ✕

The monitor includes built-in stereo speakers rated at 2 x 2W, though there is no support for Dolby Digital, Dolby Digital Plus, or DTS Surround. It does not have a remote control, PiP functionality, ambient light sensor, front camera, or smart TV capabilities.

Final Verdict

The iiyama Prolite XUB2793HS-B6 is a straightforward 27-inch IPS monitor that covers the fundamentals well for office and general desktop use. Its combination of a matte anti-glare panel, 100Hz refresh rate, and 1ms response time gives it enough versatility to handle both productivity tasks and casual gaming without requiring a separate display for each. The ergonomic stand with tilt and swivel, along with solid sRGB coverage, adds practical value for day-to-day work. That said, the Full HD resolution at this screen size, the absence of USB connectivity, and the lack of color calibration mean it is best suited for users with general rather than specialist needs. For those looking for a dependable, no-frills daily monitor with a capable IPS panel, the XUB2793HS-B6 delivers a focused and functional package.