TurboVS
Itel Roar 75 specifications and in-depth review

Itel Roar 75

Manufacturer: Itel

The Itel Roar 75 are neckband-style wireless earbuds with an open-ear fit, designed for users who prefer to keep some awareness of their surroundings during use. They come with wingtips for a more secure hold and weigh just 11 g, keeping physical comfort in mind during extended wear. With multipoint connectivity supporting two devices simultaneously, switching between paired sources is handled without re-pairing each time.

On the technical side, the Roar 75 uses a 14.2 mm driver unit with a frequency range of 20 Hz to 20,000 Hz and connects via Bluetooth 5.2 with AAC codec support, reaching up to 10 m of wireless range. Audio latency sits at 45 ms. The earbuds carry a 75 mAh battery rated for 13 hours of playback and support fast charging over USB-C, with a battery level indicator to keep track of remaining charge. A quad-microphone setup with noise-canceling mic technology handles calls, and a mute function is available directly from the control panel on the device. The IPX5 rating provides protection against sweat during physical activity.

Pros
  • Multipoint connectivity allows simultaneous pairing with two devices without re-pairing
  • 13-hour battery life provides extended use on a single charge
  • Four-microphone setup with noise cancellation supports clearer call quality
  • Fast charging support reduces downtime when the battery is low
  • IPX5 sweat resistance makes the earbuds suitable for physical activity
  • USB Type-C charging port is used for wired recharging
Cons
  • No active noise cancellation or passive noise isolation, leaving the listener fully exposed to ambient sound
  • Wireless charging is not supported, requiring a physical cable for every recharge
  • No find device feature, making it harder to locate misplaced earbuds
  • Fast pairing and NFC pairing are not available, making initial setup more manual
  • No ambient sound mode for controlled environmental awareness
  • No travel bag is included for storage or transport
Who is this for?

The Itel Roar 75 suits users who want to stay aware of their environment while listening, thanks to its open-ear neckband design that lets ambient sound through naturally. The IPX5 sweat resistance and lightweight 11 g build make it a practical option for casual workouts or outdoor activity where comfort over extended wear matters. Those who frequently switch between two devices will also find the dual-device multipoint connectivity useful for managing calls and audio across paired sources.

Who is this NOT for?

Users who need effective noise blocking will find the Roar 75 unsuitable, as it lacks both active noise cancellation and passive noise isolation, making it a poor fit for noisy commutes, open offices, or any environment where audio focus is important. Listeners who prioritize high-fidelity wireless audio will also be limited, since the earbuds do not support aptX, LDAC, or any high-resolution audio codec beyond AAC. Additionally, the absence of in/on-ear detection and a find device feature may frustrate users who expect those conveniences as part of their daily routine.

Design:

Fit Open-ear
Ingress Protection (IP) rating IPX5
water resistance Sweat resistant
weight 11 g
has no wires or cables ✕
are neckband earbuds ✓
wingtips included ✓
has stereo speakers ✓

The Itel Roar 75 are neckband-style earbuds with an open-ear fit, meaning they do not form a seal inside the ear canal. Wingtips are included to help keep the earbuds in place during use. They are not fully wireless, as the neckband connects the two earpieces. The earbuds feature stereo speakers and weigh 11 g. Build-wise, they carry an IPX5 rating, making them resistant to sweat, which suits use during physical activity.

Sound quality:

has active noise cancellation (ANC) ✕
has passive noise reduction ✕
driver unit size 14.2 mm
lowest frequency 20 Hz
highest frequency 20000 Hz
has a neodymium magnet ✕

The earbuds use a 14.2 mm driver unit and cover a frequency range of 20 Hz to 20,000 Hz. They do not include active noise cancellation or passive noise isolation, which is consistent with their open-ear design. There is no neodymium magnet in the driver assembly.

Power:

Battery life 13 hours
battery power 75 mAh
has wireless charging ✕
has a battery level indicator ✓
has a rechargeable battery ✓

The earbuds are equipped with a rechargeable 75 mAh battery rated for 13 hours of playback. A battery level indicator is available to monitor remaining charge. Wireless charging is not supported, so recharging requires a wired connection. There is no case battery included in this configuration.

Connectivity:

has fast pairing ✕
Has USB Type-C ✓
Bluetooth version 5.2
has LDAC ✕
has LDHC ✕
has aptX Adaptive ✕
has aptX Low Latency ✕
has aptX HD ✕
has aptX ✕
has aptX Lossless ✕
audio latency 45 ms
has aptX Voice ✕
maximum Bluetooth range 10 m
supports Bluetooth pairing using NFC ✕
Can be used wirelessly ✓
has AAC ✓

The earbuds connect wirelessly via Bluetooth 5.2 with a maximum range of 10 m and an audio latency of 45 ms. AAC codec is supported, while aptX in all its variants (including aptX HD, aptX Adaptive, aptX Low Latency, aptX Lossless, and aptX Voice), LDAC, and LDHC are not available. Fast pairing and NFC pairing are not supported. Charging is handled over USB Type-C, and the connection to source devices is wireless only.

Features:

has ambient sound mode ✕
has in/on-ear detection ✕
has find device feature ✕
Supports fast charging ✓
multipoint count 2
has a mute function ✓
can be used as a headset ✓
control panel placed on a device ✓
Has voice prompts ✓
travel bag is included ✕
Has an in-line control panel ✕
Has a temperature sensor ✕

The earbuds support multipoint connectivity for up to two devices simultaneously and can be used as a headset for calls. Controls are handled through a panel placed on the device itself, with no in-line control panel on the cable. Voice prompts and a mute function are both included. Fast charging is supported, which helps reduce downtime when the battery runs low. Ambient sound mode, in/on-ear detection, and a find device feature are not available, and no travel bag is included in the package. There is no body temperature sensor.

Microphone:

number of microphones 4
has a noise-canceling microphone ✓

The earbuds feature a quad-microphone setup with noise-canceling capability, which helps reduce unwanted background noise during calls and voice input.

Final Verdict

The Itel Roar 75 is a neckband earbud that covers the practical basics well — a 13-hour rated battery, fast charging, sweat resistance, and dual-device multipoint connectivity — making it a straightforward option for users who need a reliable wireless audio companion for everyday and light physical activity. Its open-ear design intentionally forgoes noise isolation, which defines both its appeal and its boundaries; those who need focused listening in loud environments will find its capabilities limited. For users whose priorities align with what the Roar 75 actually offers — extended wireless playback, a four-microphone call setup, and effortless device switching — it delivers a coherent and functional experience within its intended scope.