TurboVS
KFA2 GeForce RTX 3050 EX 1-Click OC 6GB specifications and in-depth review

KFA2 GeForce RTX 3050 EX 1-Click OC 6GB

Manufacturer: KFA2

The KFA2 GeForce RTX 3050 EX 1-Click OC 6GB is a compact graphics card based on NVIDIA's Ampere architecture, manufactured on an 8nm process with 8.7 billion transistors. It operates at a base clock of 1042 MHz and reaches a boost clock of 1470 MHz, while its modest 70W TDP makes it suitable for builds with limited power headroom. The card measures 224mm x 133mm and does not include RGB lighting or liquid cooling.

On the memory side, the card carries 6GB of GDDR6 VRAM across a 96-bit bus, delivering an effective speed of 14000 MHz and a peak bandwidth of 168 GB/s. It features 2304 shading units, 72 TMUs, and 32 ROPs, yielding a texture rate of 105.8 GTexels/s and 6.774 TFLOPS of floating-point performance. The card supports DirectX 12 Ultimate, OpenGL 4.6, ray tracing, DLSS, and Intel Resizable BAR, with connectivity provided through one HDMI 2.1 port and three DisplayPort outputs across up to four simultaneous displays.

Pros
  • Supports ray tracing and DLSS, enabling more advanced rendering features without disabling these capabilities entirely
  • DirectX 12 Ultimate and OpenGL 4.6 support covers a wide range of modern graphics APIs and compute workloads
  • Four simultaneous display outputs across one HDMI 2.1 port and three DisplayPort connections offer flexible multi-monitor setups
  • A 70W TDP means the card draws relatively little power, easing demands on the system power supply
  • ECC memory support adds a layer of data integrity for workloads sensitive to memory errors
  • Intel Resizable BAR support allows the CPU broader access to GPU memory, which can benefit certain workloads
Cons
  • The 96-bit memory bus is narrow for a card with 6GB of VRAM, which can limit memory throughput in bandwidth-intensive scenarios
  • No USB-C output is available, limiting connectivity options for certain modern monitors and displays
  • Air cooling is the only thermal solution — no water-cooling option is supported
  • The card lacks RGB lighting, which may be a drawback for users building visually themed systems
  • XeSS (XMX) is not supported, restricting access to that particular upscaling technology
Who is this for?

This card is a reasonable fit for users building compact or low-power systems, given its 70W TDP and modest physical dimensions. It handles everyday gaming and general desktop workloads that benefit from ray tracing and DLSS support, and its four display outputs make it practical for multi-monitor setups in productivity-oriented builds. The inclusion of ECC memory and OpenCL 3 support also makes it usable for light compute tasks where memory reliability matters.

Who is this NOT for?

Users targeting demanding or high-resolution gaming workloads are likely to find this card limiting, as the narrow 96-bit memory bus and 6GB of VRAM can become bottlenecks in bandwidth-heavy scenarios. It is equally unsuitable for those working with large-scale GPU compute or professional rendering tasks that require substantially higher throughput and memory capacity. Builders looking for a visually distinctive system will also find it lacking, as there is no RGB lighting and no water-cooling option available.

Performance:

GPU clock speed 1042 MHz
GPU turbo 1470 MHz
pixel rate 47.04 GPixel/s
floating-point performance 6.774 TFLOPS
texture rate 105.8 GTexels/s
GPU memory speed 1750 MHz
shading units 2304
texture mapping units (TMUs) 72
render output units (ROPs) 32
Has Double Precision Floating Point (DPFP) ✓

The KFA2 GeForce RTX 3050 EX 1-Click OC 6GB runs at a base GPU clock of 1042 MHz, boosting up to 1470 MHz under load, while GPU memory operates at 1750 MHz. Its 2304 shading units are paired with 72 texture mapping units and 32 render output units, producing a texture rate of 105.8 GTexels/s and a pixel rate of 47.04 GPixel/s. Overall floating-point performance sits at 6.774 TFLOPS, and the card also supports Double Precision Floating Point (DPFP).

Memory:

effective memory speed 14000 MHz
maximum memory bandwidth 168 GB/s
VRAM 6GB
GDDR version GDDR6
memory bus width 96-bit
Supports ECC memory ✓

This card is equipped with 6GB of GDDR6 VRAM running at an effective speed of 14000 MHz across a 96-bit memory bus, delivering a maximum memory bandwidth of 168 GB/s. ECC memory support is also included, which helps detect and correct memory errors during operation.

Features:

DirectX version DirectX 12 Ultimate
OpenGL version 4.6
OpenCL version 3
Supports multi-display technology ✓
supports ray tracing ✓
Supports 3D ✓
supports DLSS ✓
has XeSS (XMX) ✕
AMD SAM / Intel Resizable BAR Intel Resizable BAR
has LHR ✕
has RGB lighting ✕
supported displays 4

The card supports DirectX 12 Ultimate, OpenGL 4.6, and OpenCL 3, covering a broad range of graphics and compute workloads. Ray tracing and DLSS are both supported, alongside stereoscopic 3D and multi-display technology spanning up to four screens simultaneously. Intel Resizable BAR is also available, while XeSS (XMX) and LHR are not present on this card. RGB lighting is not included.

Ports:

has an HDMI output ✓
HDMI ports 1
HDMI version HDMI 2.1
DisplayPort outputs 3
USB-C ports 0
DVI outputs 0
mini DisplayPort outputs 0

The card's output configuration consists of one HDMI 2.1 port and three DisplayPort outputs, providing a total of four display connections. There are no USB-C, DVI, or mini DisplayPort outputs on this card.

General info:

GPU architecture Ampere
Thermal Design Power (TDP) 70W
PCI Express (PCIe) version 4
semiconductor size 8 nm
number of transistors 8700 million
Has air-water cooling ✕
width 224 mm
height 133 mm

Built on the Ampere architecture and fabricated on an 8nm process, this card integrates 8700 million transistors and connects via PCIe 4. It carries a TDP of 70W, relying solely on air cooling without any water-cooling solution. The card measures 224mm in width and 133mm in height.

Final Verdict

The KFA2 GeForce RTX 3050 EX 1-Click OC 6GB is a focused, low-power graphics card built around NVIDIA's Ampere architecture that slots into a clear niche: systems where thermal and spatial constraints matter. Its support for ray tracing, DLSS, and DirectX 12 Ultimate keeps it relevant for modern workloads, and the four-display output configuration adds genuine flexibility for multi-monitor use. That said, the narrow memory bus and modest VRAM capacity mean it is best matched to lighter workloads rather than demanding rendering or high-resolution gaming. For builders who need a power-efficient card with a contemporary feature set in a compact form factor, this card delivers a coherent and practical package within those boundaries.