TurboVS
KingBank DDR5-6000 CL36 32GB (2x16GB) specifications and in-depth review

KingBank DDR5-6000 CL36 32GB (2x16GB)

Manufacturer: KingBank

The KingBank DDR5-6000 CL36 32GB kit is a dual-module desktop memory solution comprised of two 16GB 288-pin DIMM sticks. Designed for DDR5 platforms, it operates at a tested speed of 6000 MHz and carries a true latency of 12 ns, reflecting a balance between clock speed and timing tightness. The modules feature an integrated heatsink while omitting RGB lighting, keeping the aesthetic straightforward.

On the technical side, the kit runs with CL36-38-38-86 primary timings at 1.35V, with an SPD-rated speed of 4800 MHz and XMP/EXPO profiles pushing it to the full 6000 MHz on compatible platforms. It supports both Intel XMP 3.0 and AMD EXPO for straightforward profile-based overclocking. ECC is not supported, Samsung B-Die is not used, and the modules stand 38 mm tall, making them compatible with most standard cooler clearances.

Pros
  • Supports both Intel XMP 3.0 and AMD EXPO, making it compatible with a wide range of current desktop platforms without manual tuning
  • Tested speed of 6000 MHz with a true latency of 12 ns reflects a well-balanced frequency-to-timing ratio for DDR5
  • Integrated heatsink helps manage module temperatures during sustained workloads
  • 32GB total capacity across two 16GB modules suits memory-intensive desktop use cases
  • At 38 mm tall, the modules are unlikely to conflict with most CPU air coolers
Cons
  • No RGB lighting for users who prefer a visually coordinated build
  • Samsung B-Die is not used, which may matter to enthusiasts who specifically seek that memory chip
  • SPD speed of 4800 MHz means the kit runs at a significantly lower frequency without XMP or EXPO profile activation
  • ECC is not supported, limiting suitability for workstation or error-sensitive applications
Who is this for?

This kit is well suited to desktop builders running modern platforms that support Intel XMP 3.0 or AMD EXPO, as it can reach its full 6000 MHz rated speed with a simple profile activation. Users assembling productivity or content creation systems who need a 32GB capacity without the bulk of RGB lighting will find the clean heatsink design practical, and the 38 mm module height makes it a reasonable fit for builds where cooler clearance is a consideration.

Who is this NOT for?

This kit is not a good match for users building workstation or server environments that require ECC memory for error correction, as that capability is absent. Enthusiasts who specifically seek Samsung B-Die for aggressive manual overclocking will also want to look elsewhere, and the 4800 MHz SPD fallback means systems without XMP or EXPO support will run the modules well below their intended speed, making it a poor choice for platforms lacking those profile features.

Performance:

true latency 12 ns
memory speed (Tested Speed) 6000
memory speed (SPD) 4800 MHz
DDR memory version 5
CAS Latency (CL) 36
tRAS timing 86
tRCD timing 38
tRP timing 38

This kit operates under the DDR5 standard with a tested speed of 6000 MHz, while its SPD-rated speed sits at 4800 MHz as a baseline for out-of-the-box compatibility. The primary timings are set at CL36-38-38-86, covering CAS Latency, tRCD, tRP, and tRAS respectively, which translate to a true latency of 12 ns at the rated frequency.

General info:

form factor 288-pin DIMM
memory size (total) 2 x 16GB
has Samsung B-Die ✕
voltage 1.35V
height 38 mm
memory size 16GB

The kit comes in a 288-pin DIMM form factor and consists of two 16GB modules for a total capacity of 32GB. Each module operates at 1.35V and stands 38 mm tall, keeping the physical footprint modest for a heatspreader-equipped stick. Samsung B-Die is not used in this kit.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0, AMD EXPO
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✕

The modules include support for both Intel XMP 3.0 and AMD EXPO, allowing compatible platforms to load optimized frequency and timing profiles automatically. An integrated heatsink is present to aid thermal management, while RGB lighting is absent, giving the modules a clean, understated appearance. ECC memory is not supported.

Benchmarks:

Final Verdict

The KingBank DDR5-6000 CL36 32GB (2x16GB) is a straightforward DDR5 desktop kit that delivers on its core promise: a tested 6000 MHz speed with a 12 ns true latency, broad platform compatibility through Intel XMP 3.0 and AMD EXPO support, and a clean, heatsink-equipped design that avoids unnecessary visual extras. It suits mainstream and productivity-focused desktop builds well, though users with specific needs around ECC support, Samsung B-Die, or aggressive manual overclocking will find its feature set limiting. For builders who want a capable 32GB DDR5 kit that activates reliably on current Intel and AMD platforms without complication, it represents a practical and well-defined option.

Popular Comparisons

KingBank DDR5-6000 CL36 32GB (2x16GB)
KingBank DDR5-6000 CL36 32GB (2x16GB)
VS
TeamGroup T-Force Vulcan DDR5-6000 CL30 32GB (2x16GB)
TeamGroup T-Force Vulcan DDR5-6000 CL30 32GB (2x16GB)