TurboVS
Klevv Fit V DDR5-5600 32GB (2x16GB) specifications and in-depth review

Klevv Fit V DDR5-5600 32GB (2x16GB)

Manufacturer: Klevv

The Klevv Fit V DDR5-5600 is a 32GB desktop memory kit made up of two 16GB modules in the standard 288-pin DIMM form factor. It operates at 1.25V, which sits on the lower end of the DDR5 voltage range, and its 33 mm module height keeps the kit compact enough to avoid clearance issues in most builds. There is no RGB lighting, giving it a straightforward, unadorned appearance suited to functional system builds.

The kit runs at a tested speed of 5600 MHz, which also matches its SPD rating, meaning no BIOS adjustment is required to reach the rated frequency on compatible platforms — though Intel XMP 3.0 and AMD EXPO profiles are included for those who want to enable the full specification automatically. The timing profile is set at CL30-36-36-88, producing a true latency of 10.71 ns at the rated speed. The modules do not use Samsung B-Die and do not support ECC memory.

Pros
  • Operates at 1.25V, which is notably low for a DDR5 kit and reduces power draw during everyday use
  • The tested speed matches the SPD rating at 5600 MHz, meaning the rated frequency is available without needing to enable any XMP or EXPO profile in the BIOS
  • Supports both Intel XMP 3.0 and AMD EXPO, providing broad compatibility across current-generation platforms from either manufacturer
  • The 33 mm module height helps avoid clearance conflicts with larger CPU coolers in tighter builds
  • Includes an integrated heatsink for passive thermal management without adding RGB bulk
Cons
  • Does not use Samsung B-Die, which limits appeal for users specifically focused on manual overclocking potential
  • ECC memory is not supported, making it unsuitable for workstation or server environments that require error correction
  • The CL30-36-36-88 timing profile carries a relatively long tRAS of 88, which is on the higher side for a DDR5-5600 kit
Who is this for?

This kit is a practical choice for desktop builders assembling a straightforward DDR5 system on either an Intel or AMD platform, since the native 5600 MHz SPD speed means no BIOS configuration is needed to reach the rated frequency. The 1.25V operating voltage makes it well-suited for users who want to keep system power draw modest, and the 33 mm low-profile heatsink design works well in cases where CPU cooler clearance is a concern.

Who is this NOT for?

Users who intend to push their memory beyond rated specifications through manual tuning will likely find this kit limiting, as it does not use Samsung B-Die, which is a commonly sought chip for that purpose. It is also entirely unsuitable for any build or workload requiring ECC memory support, such as professional workstation or data-sensitive environments. Likewise, the 288-pin DIMM form factor makes it incompatible with laptop or compact systems that require SO-DIMM modules.

Performance:

true latency 10.71 ns
memory speed (Tested Speed) 5600
memory speed (SPD) 5600 MHz
DDR memory version 5
CAS Latency (CL) 30
tRAS timing 88
tRCD timing 36
tRP timing 36

This DDR5 kit has a tested speed of 5600 MHz, which aligns with its SPD rating, meaning the rated frequency is available without requiring any manual profile activation. The full timing profile sits at CL30-36-36-88, covering CAS Latency, tRCD, tRP, and tRAS, which results in a true latency of 10.71 ns at the rated speed.

General info:

form factor 288-pin DIMM
memory size (total) 2 x 16GB
has Samsung B-Die ✕
voltage 1.25V
height 33 mm
memory size 16GB

The kit uses the standard 288-pin DIMM form factor and is configured as a dual-module set, with each stick providing 16GB for a combined total of 32GB. It operates at 1.25V and stands 33 mm tall, making it a compact option for builds with limited clearance above the memory slots. The modules do not use Samsung B-Die.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0, AMD EXPO
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✕

The kit carries profiles for both Intel XMP 3.0 and AMD EXPO, enabling the rated speed to be activated automatically on compatible motherboards from either platform. An integrated heatsink is present to assist with heat dissipation during use. RGB lighting is not included, and ECC memory is not supported.

Benchmarks:

Final Verdict

The Klevv Fit V DDR5-5600 is a no-frills desktop memory kit that covers the essentials well for users building a modern DDR5 system without specific overclocking ambitions. Its standout characteristic is the native 5600 MHz SPD speed paired with a 1.25V operating voltage, which together make it a plug-and-play option that draws less power than many comparable DDR5 kits. Dual-platform support through Intel XMP 3.0 and AMD EXPO adds practical flexibility, and the low-profile 33 mm heatsink keeps build compatibility broad. It does carry limitations for more demanding use cases — no ECC support and the absence of Samsung B-Die will exclude it from certain user groups — but for the mainstream desktop builder who wants a reliable, low-voltage DDR5-5600 kit with broad platform compatibility and a clean aesthetic, the Klevv Fit V DDR5-5600 delivers a focused and coherent package.