TurboVS
Klevv Fit V DDR5-6000 CL28 32GB (2x16GB) specifications and in-depth review

Klevv Fit V DDR5-6000 CL28 32GB (2x16GB)

Manufacturer: Klevv

The Klevv Fit V DDR5-6000 CL28 is a dual-channel desktop memory kit consisting of two 16GB DDR5 modules in a 288-pin DIMM form factor. Designed for systems that support overclocking profiles, it ships with both Intel XMP 3.0 and AMD EXPO compatibility, allowing users on either platform to load the rated 6000 MHz speed directly from the motherboard BIOS. An integrated heatsink is included, though the kit foregoes RGB lighting, keeping its profile straightforward.

At the rated tested speed of 6000 MHz, the kit operates with CL28-36-36-76 timings at 1.35V, with a true latency of 9.3 ns. The SPD base speed sits at 5600 MHz for out-of-the-box compatibility before any profile is enabled. Each module holds 16GB, bringing the kit total to 32GB, and ECC memory is not supported. The physical height of each module is 33 mm, and Samsung B-Die is not used in this kit.

Pros
  • Dual-platform overclocking profile support via both Intel XMP 3.0 and AMD EXPO makes the kit straightforward to configure on either compatible platform
  • The 6000 MHz tested speed with CL28-36-36-76 timings and a 9.3 ns true latency reflects a well-balanced DDR5 overclock profile
  • An integrated heatsink is included to assist with thermal management during operation
  • At 33 mm module height, the kit is relatively low-profile, which may help with clearance around larger CPU coolers
  • The 288-pin DIMM form factor and 1.35V operating voltage are standard for DDR5 desktop builds
Cons
  • ECC memory is not supported, making this kit unsuitable for workloads or systems that require error-correcting memory
  • Samsung B-Die is not used, which may be a consideration for users specifically seeking that memory configuration
  • No RGB lighting is present, which may not suit users who want illuminated memory modules in a visible build
Who is this for?

This kit suits desktop builders on either Intel or AMD platforms who want to enable a rated 6000 MHz DDR5 overclock without manual tuning, thanks to the included XMP 3.0 and EXPO profiles. Its 33 mm low-profile height makes it a practical choice for systems with large tower coolers or compact cases where taller modules might cause clearance issues. Users who prefer a clean, understated build without RGB lighting will also find the plain heatsink design a natural fit.

Who is this NOT for?

This kit is not suited to users who require ECC memory support, such as those building workstations or servers where data integrity and error correction are necessary. Users who specifically seek Samsung B-Die modules for fine-grained manual overclocking will need to look elsewhere, as this kit does not use that configuration. It is also not a fit for builders who want illuminated memory as part of a lit system aesthetic, since no RGB lighting is present.

Performance:

true latency 9.3 ns
memory speed (Tested Speed) 6000
memory speed (SPD) 5600 MHz
DDR memory version 5
CAS Latency (CL) 28
tRAS timing 76
tRCD timing 36
tRP timing 36

This DDR5 kit is rated at a tested speed of 6000 MHz with a native SPD speed of 5600 MHz, resulting in a true latency of 9.3 ns at the rated profile. The full timing configuration runs at CL28-36-36-76, covering CAS Latency, tRCD, tRP, and tRAS respectively.

General info:

form factor 288-pin DIMM
memory size (total) 2 x 16GB
has Samsung B-Die ✕
voltage 1.35V
height 33 mm
memory size 16GB

The kit uses a 288-pin DIMM form factor and consists of two 16GB modules for a total capacity of 32GB, operating at 1.35V. Each module stands 33 mm tall, and Samsung B-Die is not used in this kit.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0, AMD EXPO
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✕

The kit supports both Intel XMP 3.0 and AMD EXPO profiles for straightforward overclocking setup on compatible platforms. An integrated heatsink is included, while RGB lighting is absent, giving the modules a plain appearance. ECC memory is not supported.

Benchmarks:

Final Verdict

The Klevv Fit V DDR5-6000 CL28 32GB kit is a straightforward DDR5 memory option for desktop builders who want a plug-and-play overclocking experience across both Intel and AMD platforms, backed by Intel XMP 3.0 and AMD EXPO profile support at a tested 6000 MHz speed. Its low 33 mm module height and no-frills heatsink design add practical value for space-conscious or aesthetically restrained builds. The absence of ECC support and Samsung B-Die narrows its appeal to general consumer desktop use rather than professional or enthusiast-tuning scenarios. For users who need a reliable dual-channel DDR5 kit with broad platform compatibility and a clean profile, the Fit V DDR5-6000 CL28 delivers a coherent and well-defined package within those parameters.