TurboVS
KZ AS10 Pro specifications and in-depth review

KZ AS10 Pro

Manufacturer: KZ Audio

The KZ AS10 Pro is an in-ear monitor from KnowledgeZenith designed around a five balanced armature driver configuration, housed in a shell produced through a 3D-printed resin process. It sits within a product line aimed at listeners who prioritize a multi-driver setup in a compact IEM form factor, and its construction reflects a focus on driver density within the shell.

On the technical side, the AS10 Pro operates at an impedance of 26 Ohms and features a detachable cable using a 2-pin 0.75 mm connector. The included cable is 1.2 m in length, made from silver-plated copper, and terminates in a standard 3.5 mm connector. The unit does not include an in-line control panel, a built-in microphone, or a travel bag.

Pros
  • The detachable cable with a 2-pin 0.75 mm connector makes it straightforward to replace or upgrade the cable without discarding the earphones
  • A five balanced armature driver setup provides a multi-driver configuration within the in-ear monitor form factor
  • The silver-plated copper cable is a step above basic copper wiring in terms of conductor material quality
  • The 3D-printed resin shell allows for a more precisely formed earpiece structure
  • At 26 Ohms impedance, the earphones can be driven without requiring particularly powerful amplification equipment
Cons
  • No in-line control panel means volume and playback cannot be adjusted directly from the cable
  • The absence of a built-in microphone makes the earphones unsuitable for hands-free calls without a separate device
  • No travel bag is included, leaving the user to source their own carrying solution for protection during transport
Who is this for?

The KZ AS10 Pro is well suited to listeners who want a multi-driver balanced armature setup in an in-ear monitor and prefer the ability to swap or upgrade cables over time, thanks to the detachable 2-pin connection. Its 26 Ohms impedance means it can be used comfortably with smartphones, portable DAPs, and other consumer-grade sources without dedicated high-powered amplification. The 3D-printed resin shell also makes it a reasonable fit for users who value a precisely formed earpiece structure in a wired IEM.

Who is this NOT for?

Users who need hands-free calling or voice communication will find this product unsuitable, as it lacks both a built-in microphone and an in-line control panel, making it impractical for taking calls or managing playback on the go without reaching for the source device. It is also a poor fit for those who frequently travel and require a bundled carrying solution, since no travel bag is included. Additionally, listeners who prefer wireless or semi-wireless setups will not find what they need here, as the product is strictly a wired in-ear monitor with no indicated wireless capability.

General info:

Driver configuration 5BA
Type of drivers Balanced armature (BA)
Shell material/process 3D-printed resin
has a built-in microphone ✕
travel bag is included ✕
Has an in-line control panel ✕

The KZ AS10 Pro uses a 5-driver balanced armature (BA) configuration, placing five BA drivers within a shell formed through a 3D-printed resin process. The unit does not include a built-in microphone, an in-line control panel, or a travel bag.

Specifications:

drivers count 5
impedance 26 Ohms

The KZ AS10 Pro is equipped with 5 drivers and operates at an impedance of 26 Ohms, a figure that reflects its compatibility with a range of standard audio sources.

Cable:

Connector type 3.5 mm
Pin connector 2-Pin (0.75 mm)
Cable material Silver-plated copper (SPC)
cable length 1.2 m
has a detachable cable ✓

The KZ AS10 Pro comes with a detachable cable made from silver-plated copper (SPC), measuring 1.2 m in length and terminating in a standard 3.5 mm connector. It attaches to the earpieces via a 2-pin 0.75 mm pin connector, allowing the cable to be swapped out if needed.

Final Verdict

The KZ AS10 Pro is a wired in-ear monitor that centers its identity around a five balanced armature driver configuration housed in a 3D-printed resin shell, offering a multi-driver setup alongside the practical convenience of a detachable silver-plated copper cable. Its 26 Ohms impedance keeps it accessible to standard consumer sources, and the swappable cable adds a degree of long-term flexibility that purely fixed-cable designs lack. That said, the absence of a microphone, in-line controls, and any bundled accessories does narrow its appeal to users focused solely on passive listening. For those whose needs align with a straightforward, cable-upgradeable wired IEM with a dense driver array, the AS10 Pro delivers a technically coherent package within its defined scope.