TurboVS
LG 27U411A-B 27" specifications and in-depth review

LG 27U411A-B 27"

Manufacturer: LG

The LG 27U411A-B is a 27-inch standard desktop monitor built around an IPS panel with LED backlighting. It carries a 120Hz refresh rate, which places it a step above typical entry-level displays in terms of motion handling, and its glossy screen surface helps deliver vivid color rendering in controlled lighting environments. With 16.7 million displayable colors and a stated 99% sRGB coverage, the panel is positioned for general-purpose use where color consistency matters.

On the technical side, the monitor outputs at 1920x1080 pixels across its 27-inch screen, resulting in a pixel density of 81 ppi. Brightness is rated at 250 nits typical, with a contrast ratio of 3000:1 and a 5ms response time. Viewing angles reach 178 degrees both horizontally and vertically. Connectivity includes one HDMI 2.0 port and a VGA connector, along with a 3.5mm audio jack. The stand supports tilt adjustment and the display is VESA mount compatible, though it does not offer swivel or portrait mode rotation. Standby power draw is rated at 0.5W.

Pros
  • The 120Hz refresh rate provides noticeably smoother motion handling compared to standard 60Hz panels, which benefits everyday scrolling and fast-moving content
  • Wide 178-degree viewing angles both horizontally and vertically mean the image holds up well even when viewed from off-center positions
  • 99% sRGB coverage combined with support for color calibration makes this a practical choice for tasks where color consistency within the standard gamut is important
  • A contrast ratio of 3000:1 allows for a meaningful difference between dark and bright areas on screen
  • VESA mount support gives users the option to remove the stand and mount the display on a wall or third-party arm
  • The 0.5W standby power draw reflects efficient power management when the display is idle
Cons
  • The glossy panel without any anti-glare coating can produce distracting reflections in bright or mixed-lighting environments
  • At 81 ppi, the pixel density on a 27-inch screen at 1080p is relatively low, which can result in a less sharp image when viewed up close
  • Connectivity is limited to a single HDMI 2.0 port and a VGA connector, with no DisplayPort, USB Type-C, or USB ports available
  • The stand does not support swivel adjustment or portrait mode rotation, reducing ergonomic flexibility
  • There are no built-in speakers, meaning users must rely on an external audio solution or headphones connected via the 3.5mm jack
  • The 250-nit typical brightness is modest and may be insufficient in well-lit or bright room conditions
Who is this for?

This monitor is a practical fit for everyday home and office use, particularly for users who need reliable color consistency within the sRGB color space — such as those doing general photo editing, document work, or content review. The 99% sRGB coverage and color calibration support make it a reasonable tool where standard gamut accuracy matters without requiring a specialist display. The 120Hz refresh rate also benefits users who work with fast-moving content or simply prefer a smoother desktop experience. Additionally, those who plan to use a third-party monitor arm will appreciate the included VESA mount compatibility, which adds flexibility to workspace setups.

Who is this NOT for?

Users working in bright or mixed-lighting environments will likely struggle with this monitor, as the glossy panel without anti-glare coating tends to produce noticeable reflections that can interfere with extended viewing sessions. It is also a poor match for those who sit close to large screens, since the 81 ppi pixel density at 27 inches can make individual pixels discernible, resulting in a softer image for detail-sensitive tasks like fine illustration or precise photo retouching. Furthermore, users who need a versatile connectivity setup — such as those connecting multiple devices, docking laptops, or routing audio through the display — will find the limited port selection and absence of USB ports and speakers a significant constraint.

Display:

Display type LED-backlit, LCD, IPS
response time 5 ms
screen size 27"
resolution 1920 x 1080 px
pixel density 81 ppi
has anti-glare coating ✕
refresh rate 120Hz
maximum horizontal viewing angle 178º
maximum vertical viewing angle 178º
has a matte panel ✕
has a glossy panel ✓
has a touch screen ✕

The display section of this monitor centers on a 27-inch IPS panel with LED backlighting, delivering a resolution of 1920x1080 pixels at a pixel density of 81 ppi. It runs at a 120Hz refresh rate with a 5ms response time, and both horizontal and vertical viewing angles extend to 178 degrees. The screen uses a glossy surface rather than a matte finish, and it does not include an anti-glare coating or touch screen functionality.

General info:

Type Standard
supports total tilt ✓
Has a swivel stand ✕
Supports VESA mount ✓
height 457 mm
width 612 mm
thickness 220 mm
weight 3311 g
supports portrait mode ✕
volume 61530.48 cm³

This is a standard-type monitor measuring 612 mm wide, 457 mm tall, and 220 mm thick, with a total weight of 3311 g. The stand supports tilt adjustment and the unit is VESA mount compatible, offering some flexibility in how it can be positioned or wall-mounted. However, it does not include a swivel stand and does not support portrait mode rotation. The overall volume of the unit comes in at 61530.48 cm³.

Colors:

brightness (typical) 250 nits
supports color calibration ✓
display colors 16.7 million
contrast ratio 3000:1
sRGB coverage 99%

The panel reproduces 16.7 million colors with a 99% sRGB coverage, making it well-suited for tasks where color accuracy across the standard gamut matters. Typical brightness is rated at 250 nits, and the contrast ratio sits at 3000:1, which contributes to a noticeable distinction between light and dark areas on screen. The monitor also supports color calibration, allowing users to fine-tune output to meet specific accuracy requirements.

Connectivity:

HDMI ports 1
supports Thunderbolt ✕
DisplayPort outputs 0
has a socket for a 3.5 mm audio jack ✓
has a DVI connector ✕
USB ports 0
Has USB Type-C ✕
HDMI version HDMI 2.0
supports Ethernet ✕
supports Wi-Fi ✕
has AirPlay ✕
mini DisplayPort outputs 0
has a VGA connector ✓

Connectivity on this monitor is straightforward, centered around a single HDMI 2.0 port and a VGA connector as the available video inputs. A 3.5mm audio jack is also present for headset or speaker use. The monitor does not include DisplayPort, mini DisplayPort, DVI, USB Type-C, or any USB ports, and there is no support for Thunderbolt, Ethernet, Wi-Fi, or AirPlay.

Power:

standby power consumption 0.5W

The only available power specification for this monitor is its standby power consumption of 0.5W, indicating the draw when the display is in a low-power idle state rather than actively in use.

Features:

has PiP ✕
has stereo speakers ✕
has built-in smart TV ✕
has a remote control ✕
supports Dolby Digital ✕
supports Dolby Digital Plus ✕
has DTS Surround ✕
has an ambient light sensor ✕
has a front camera ✕

This monitor is light on additional features, omitting several capabilities commonly found on more fully equipped displays. It does not include stereo speakers, a front camera, an ambient light sensor, or a remote control. Picture-in-Picture is not supported, and on the audio side, there is no Dolby Digital, Dolby Digital Plus, or DTS Surround. Built-in smart TV functionality is also absent, positioning this as a straightforward display without extended multimedia or smart features.

Final Verdict

The LG 27U411A-B is a straightforward 27-inch monitor that covers the essentials competently, making it a reasonable fit for general home and office environments where demands are moderate. Its 99% sRGB coverage with color calibration support gives it more color credibility than many displays in its class, and the 120Hz refresh rate adds a degree of smoothness that elevates the everyday experience. That said, the glossy panel, limited connectivity, and modest pixel density at this screen size do narrow its appeal — users with more demanding visual workflows or complex desk setups may find its capabilities restrictive. Taken as a whole, the LG 27U411A-B is best understood as a focused, no-frills display that performs reliably within a defined range of everyday tasks rather than a versatile option for specialized or demanding use.