The Logitech Zone Wireless 2 ES uses an on-ear fit and weighs 212 g, keeping the overall form relatively lightweight for extended wear. It features stereo speakers and a closed-back design, and includes a 1.5 m cable for wired use. The headset carries an IP68 ingress protection rating, though no specific water resistance feature is listed separately. It is not designed for kids, and is intended as a general-use adult headset.
The headset includes active noise cancellation (ANC) to reduce ambient sound, while passive noise reduction is not part of its design. Audio is handled through 40 mm drivers covering a full 20 Hz to 20,000 Hz frequency range, with an impedance of 36 Ohms and a sound pressure level of 97 dB/mW. Spatial audio is not supported, and the drivers do not use a neodymium magnet configuration.
The headset is powered by a built-in rechargeable battery that is not removable and does not support wireless or solar charging. Battery life is rated at 25 hours under standard use, while battery life with ANC active extends to 48 hours. A full charge takes 2 hours via USB Type-C, and a battery level indicator is included to keep track of remaining charge.
The headset supports both wireless and wired connectivity, using Bluetooth 5.3 for wireless operation with a maximum range of 50 m. Advanced audio codecs including aptX, aptX Adaptive, aptX HD, aptX Low Latency, aptX Lossless, AAC, LDAC, and LDHC are not supported, and Bluetooth LE Audio with Auracast is also absent. On the pairing side, neither fast pairing nor NFC-based pairing is available.
The headset can be used as a headset for calls and includes two microphones with noise-canceling capability, along with an ambient sound mode for hearing surrounding audio when needed. It supports multipoint connection for up to two devices simultaneously, and controls are handled via an on-device panel rather than an in-line control on the cable. In/on-ear detection and a dedicated mute function are not included. The headset comes with a 2-year warranty.