TurboVS
Meze Audio Alba specifications and in-depth review

Meze Audio Alba

Manufacturer: Meze Audio

The Meze Audio Alba is an in-ear monitor centered around a straightforward single dynamic driver configuration housed in a 3D-printed resin shell. The build reflects a focused approach to driver selection, relying on one dynamic driver to handle the full frequency range without additional balanced armature or planar elements in the mix.

On the technical side, the Alba operates at 32 Ohms impedance, which makes it compatible with a broad range of sources. The cable measures 1.2 meters in length, is constructed from silver-plated copper, and connects via a standard 3.5 mm jack. A detachable 2-pin (0.78 mm) connector allows the cable to be swapped out if needed. The unit does not include an in-line control panel, built-in microphone, or travel bag.

Pros
  • The detachable 2-pin (0.78 mm) cable allows for straightforward cable replacement without discarding the entire unit
  • The silver-plated copper cable material is a step above basic copper wiring, which can affect signal conductivity
  • The 3D-printed resin shell enables a precise and consistent earpiece shape
  • A single dynamic driver setup keeps the acoustic design simple and free from the crossover complexity found in multi-driver configurations
  • At 32 Ohms impedance, the earphones can be driven directly from standard portable sources without requiring additional amplification
  • The 1.2-meter cable length is practical for everyday seated and on-the-go use
Cons
  • No built-in microphone means the earphones cannot be used for calls or voice input without a separate device
  • The absence of an in-line control panel removes the ability to adjust volume or manage playback directly from the cable
  • No travel bag is included, leaving the user to source their own storage solution for transport and protection
  • A single dynamic driver handles the full frequency range without any additional driver support, which limits tuning flexibility
Who is this for?

The Meze Audio Alba suits listeners who prefer a straightforward, single dynamic driver setup and value cable flexibility through a detachable 2-pin connection. At 32 Ohms, it can be driven comfortably from smartphones, DAPs, and other portable sources without additional gear, making it practical for everyday portable listening. The 3D-printed resin shell also makes it a reasonable fit for users who want a precisely formed earpiece without the added bulk of heavier shell materials.

Who is this NOT for?

Users who need hands-free calling or voice assistant access will find the Alba limiting, as it lacks both a built-in microphone and an in-line control panel. It is equally unsuitable for those who require on-cable playback and volume controls for convenience during commutes or workouts. Additionally, listeners who expect a travel case or protective pouch included in the package will need to source one separately, making it a less complete out-of-the-box solution for frequent travelers.

General info:

Driver configuration 1DD
Type of drivers Dynamic driver (DD)
Shell material/process 3D-printed resin
has a built-in microphone ✕
travel bag is included ✕
Has an in-line control panel ✕

The Meze Audio Alba uses a single dynamic driver (1DD) configuration, relying on one dynamic driver to cover the full audio range without any hybrid elements. Its shell is constructed through a 3D-printed resin process, a manufacturing approach that allows for precise shaping of the earpiece body. The unit does not include a built-in microphone, an in-line control panel, or a travel bag.

Specifications:

drivers count 1
impedance 32 Ohms

The Alba is built around a single driver and carries an impedance rating of 32 Ohms, a specification that reflects how the earphone interacts electrically with whatever source it is connected to.

Cable:

Connector type 3.5 mm
Pin connector 2-Pin (0.78 mm)
Cable material Silver-plated copper (SPC)
cable length 1.2 m
has a detachable cable ✓

The Alba ships with a detachable cable that connects to the earpieces via a 2-pin (0.78 mm) socket, allowing the cable to be replaced if needed. It is made from silver-plated copper (SPC) and runs 1.2 meters in length, terminating in a standard 3.5 mm connector at the source end.

Final Verdict

The Meze Audio Alba is a focused in-ear monitor that keeps its design deliberately minimal — a single dynamic driver, a 3D-printed resin shell, and a detachable silver-plated copper cable that gives the user meaningful flexibility without overcomplicating the overall package. Its 32 Ohm impedance pairs well with portable sources, and the 2-pin connector ensures the cable can be swapped when necessary. Where it falls short is in the convenience features department — no microphone, no in-line controls, and no included case — which narrows its appeal to users who prioritize acoustic simplicity over everyday practicality. For those whose needs align with what the Alba actually offers, it presents a coherent and well-considered option within the in-ear monitor category.