TurboVS
Moondrop Concerto specifications and in-depth review

Moondrop Concerto

Manufacturer: Moondrop

The Moondrop Concerto is an in-ear monitor built around a single dynamic driver configuration, housed in a shell formed through a 3D-printed resin process. It connects via a 2-Pin 0.78 mm socket and ships with a 1.2-metre cable terminated in USB-C. The earphone does not include a built-in microphone, an in-line control panel, or a travel bag.

On the technical side, the Concerto operates at 13 ohms impedance and covers a frequency range of 20 Hz to 20,000 Hz. Total harmonic distortion is rated at no more than 0.05% measured at 1 kHz and 94 dB, and the driver count as listed in the specifications stands at 2. The cable, measuring 1.2 metres in length, uses a USB-C connector at the source end.

Pros
  • The 13-ohm impedance makes it easy to drive from a wide range of source devices without requiring a dedicated amplifier
  • Total harmonic distortion is rated at no more than 0.05% at 1kHz and 94dB, indicating a low distortion figure under those test conditions
  • The 3D-printed resin shell allows for precise cavity shaping, which is well-suited to the in-ear monitor form factor
  • The USB-C connector at the cable end aligns with modern source devices that have moved away from older port standards
  • The frequency response covers the full standard audible range from 20Hz to 20,000Hz
Cons
  • The cable is not detachable, so any damage to it requires replacing the entire unit rather than just swapping the cable
  • There is no in-line control panel, meaning volume adjustment and playback control must be handled directly on the source device
  • No built-in microphone is included, limiting hands-free use for calls or voice input
  • No travel bag is included, leaving the user to source their own storage solution for transport and protection
  • The 2-Pin 0.78mm connector, while standard in the IEM market, cannot be utilized independently since the cable is fixed and non-removable
Who is this for?

The Moondrop Concerto suits listeners who prioritize a straightforward, no-frills listening setup and value a low-impedance, easy-to-drive earphone that pairs directly with smartphones, laptops, or USB-C-equipped sources without additional amplification. Its 3D-printed resin shell and single dynamic driver configuration make it a reasonable fit for everyday personal listening where compactness and simplicity are more important than modularity. Users who primarily consume music through a fixed listening chain and do not need to swap cables or accessories will find its fixed-cable design unproblematic in daily use.

Who is this NOT for?

This earphone is not well-suited for users who require hands-free calling or voice assistant functionality, as it lacks both a built-in microphone and an in-line control panel, making it impractical for communication-focused use. Those who travel frequently or carry their gear across different environments may find the absence of a bundled travel bag inconvenient, as the earphone ships with no dedicated storage or protection solution. Additionally, users who prefer the flexibility of upgrading or replacing their cable — whether for fit, length, or connector preference — will be limited by the non-detachable cable, which cannot be swapped out independently.

General info:

Driver configuration 1DD
Type of drivers Dynamic driver (DD)
Shell material/process 3D-printed resin
has a built-in microphone ✕
travel bag is included ✕
Has an in-line control panel ✕

The Moondrop Concerto uses a single dynamic driver (1DD) configuration, relying on one dynamic driver unit to handle the full audio range. Its shell is formed through a 3D-printed resin process, a construction method commonly associated with precise cavity shaping in in-ear monitor design. The earphone does not include a built-in microphone, an in-line control panel, or a travel bag.

Specifications:

drivers count 2
impedance 13 Ohms
Total harmonic distortion (THD) ≤0.05% (@1kHz, 94dB)
lowest frequency 20 Hz
highest frequency 20000 Hz

The Moondrop Concerto lists a driver count of 2 and operates at an impedance of 13 ohms, placing it on the lower end of the impedance range. Its frequency response spans from 20 Hz up to 20,000 Hz, covering the full standard audible range. Total harmonic distortion (THD) is rated at no more than 0.05% when measured at 1 kHz and 94 dB, indicating a low distortion figure under those specific test conditions.

Cable:

Connector type USB-C
Pin connector 2-Pin (0.78 mm)
cable length 1.2 m
has a detachable cable ✕

The Moondrop Concerto comes with a 1.2-metre cable that terminates in a USB-C connector at the source end and connects to the earphones via a 2-Pin 0.78 mm socket. The cable is not detachable, meaning it is fixed to the earphone housings and cannot be swapped out for an alternative.

Final Verdict

The Moondrop Concerto is a focused, no-frills in-ear monitor that keeps its proposition clear: a single dynamic driver housed in a 3D-printed resin shell, low 13-ohm impedance for effortless pairing with USB-C sources, and a distortion rating of no more than 0.05% at 1kHz and 94dB — all packaged into a straightforward listening tool. It is most at home in the hands of users who want a clean, uncomplicated daily driver and are not dependent on hands-free functionality, cable upgradability, or travel accessories. Those who can work within those constraints will find the Concerto a coherent and well-defined option; those who need more flexibility in either features or modularity should look toward earphones with a broader accessory and connectivity offering.