TurboVS
Moondrop Meteor specifications and in-depth review

Moondrop Meteor

Manufacturer: Moondrop

The Moondrop Meteor is a tribrid in-ear monitor that brings together three distinct driver technologies within a 3D-printed resin shell. With seven total drivers working in concert — one dynamic, two balanced armature, and four planar magnetic units — it represents a fairly ambitious approach to multi-driver IEM design from Moondrop.

On the technical side, the Meteor operates at 18.5 Ohms impedance and covers a frequency range of 20 Hz to 20,000 Hz, with total harmonic distortion rated at ≤0.6% at 1 kHz and 94 dB. It ships with a 1.2-meter silver-plated copper cable terminated in a 3.5 mm connector, attached via a 0.78 mm 2-pin connection. The cable is not detachable, and the unit does not include an inline remote, built-in microphone, or travel case.

Pros
  • The tribrid driver setup combining dynamic, balanced armature, and planar magnetic drivers represents a notably complex driver configuration for an IEM
  • Seven total drivers working across three different driver technologies allows each type to handle distinct aspects of sound reproduction
  • A silver-plated copper cable is a step above basic copper wiring and is generally associated with better signal conductivity
  • The 3D-printed resin shell enables precise internal driver placement and a well-fitted form factor
  • At 18.5 Ohms impedance, the IEM is easy to drive from portable sources without requiring dedicated amplification
  • THD rated at 0.6% or below at 1 kHz and 94 dB reflects a controlled distortion spec for a multi-driver design
Cons
  • The cable is non-detachable, meaning any damage to it requires replacing the entire assembly rather than just the cable
  • No travel bag is included, leaving users to source their own protective carrying solution
  • The absence of an inline remote or microphone makes it unsuitable for hands-free calls or basic playback control on the go
  • A full frequency range of 20 Hz to 20,000 Hz without extended high-frequency reach may limit appeal for listeners seeking ultra-high-frequency extension beyond standard audible limits
Who is this for?

This IEM is well-suited to dedicated audio enthusiasts who prioritize a complex, multi-driver sound presentation and are comfortable using a tribrid driver configuration for critical listening sessions. Its low 18.5 Ohm impedance means it pairs readily with smartphones and portable DAPs without the need for a separate amplifier, making it practical for on-the-go listening. The 3D-printed resin shell and precise driver layout also make it a reasonable fit for users who value a tailored, structured build in a compact IEM form factor.

Who is this NOT for?

Users who need versatility in cable options will find the non-detachable cable a significant limitation, as any wear or damage means the entire unit is affected. Those who require hands-free communication or inline playback controls — such as commuters or remote workers — will find this IEM lacking, given the absence of both a microphone and an inline remote. Additionally, users who frequently travel and expect a complete out-of-the-box experience may be inconvenienced by the lack of an included carrying case, which leaves the IEM with no dedicated protection during transport.

General info:

Driver configuration 1DD + 2BA + 4PM
Type of drivers Dynamic driver (DD), Balanced armature (BA), Planar magnetic
Diaphragm material Composite
Shell material/process 3D-printed resin
has a built-in microphone ✕
travel bag is included ✕
Has an in-line control panel ✕

The Moondrop Meteor uses a tribrid driver configuration of 1 dynamic driver, 2 balanced armature, and 4 planar magnetic drivers, with the dynamic driver featuring a composite diaphragm material. Its housing is constructed from 3D-printed resin, giving it a precisely formed shell. The unit does not include a built-in microphone, an in-line control panel, or a travel bag.

Specifications:

drivers count 7
impedance 18.5 Ohms
Total harmonic distortion (THD) ≤0.6% (@1kHz, 94dB)
lowest frequency 20 Hz
highest frequency 20000 Hz

The Moondrop Meteor houses a total of 7 drivers and operates at an impedance of 18.5 Ohms. Its frequency response spans from 20 Hz up to 20,000 Hz, covering the full audible range. Total harmonic distortion is rated at ≤0.6% measured at 1 kHz and 94 dB, indicating a relatively controlled distortion figure at that reference point.

Cable:

Connector type 3.5 mm
Pin connector 2-Pin (0.78 mm)
Cable material Silver-plated copper (SPC)
cable length 1.2 m
has a detachable cable ✕

The Moondrop Meteor comes with a 1.2-meter cable made from silver-plated copper (SPC), terminated with a standard 3.5 mm connector on one end and attaching to the earpieces via a 2-pin 0.78 mm connector. The cable is not detachable, meaning it is fixed to the IEM housing and cannot be swapped out.

Final Verdict

The Moondrop Meteor is a technically ambitious in-ear monitor that makes a strong case for its place among multi-driver IEMs, largely on the strength of its tribrid 1DD + 2BA + 4PM driver configuration packed into a 3D-printed resin shell. Its low impedance keeps it accessible to everyday portable sources, and the silver-plated copper cable adds a thoughtful touch to the overall package. That said, the fixed cable and the absence of a microphone, inline controls, or a carry case do impose real practical limits depending on how and where it is used. For listeners whose priority is a richly layered, driver-diverse listening experience in a dedicated audio context, the Meteor delivers a compelling and well-considered spec sheet — just with the understanding that convenience-oriented features have largely been set aside in favor of acoustic hardware.