MSI Pro MP273L E14 27" specifications and in-depth review

MSI Pro MP273L E14 27"

Manufacturer: MSI

The MSI Pro MP273L E14 is a 27-inch standard desktop monitor built around an IPS panel with LED backlighting, offering wide 178-degree viewing angles both horizontally and vertically. Its matte, anti-glare surface makes it a practical choice for everyday use in varied lighting conditions, and the display supports AMD FreeSync adaptive synchronization to reduce screen tearing during use. The stand accommodates tilt adjustments and portrait mode rotation, while VESA mount compatibility gives users additional flexibility in how they position the screen.

On the technical side, the panel outputs a native resolution of 1920 x 1080 pixels across the 27-inch screen, yielding a pixel density of 81 ppi, and reaches a 144Hz refresh rate with a 1ms response time. Color output covers 102% of the sRGB color space at 8-bit depth with 16.7 million displayable colors, a typical brightness of 250 nits, and a contrast ratio of 1500:1. Connectivity is handled through a single HDMI 2.0 port and a VGA connector, with no DisplayPort, USB, or audio jack present. The monitor weighs approximately 4050 g and measures 613 mm wide by 362 mm tall with a depth of 49 mm.

Pros
  • The IPS panel delivers wide 178-degree viewing angles both horizontally and vertically, keeping colors and contrast consistent when viewed from off-center positions
  • A 144Hz refresh rate combined with a 1ms response time supports smooth motion during fast-paced use
  • AMD FreeSync adaptive synchronization helps reduce screen tearing without requiring additional hardware setup
  • The matte, anti-glare coating reduces reflections in environments with variable lighting conditions
  • sRGB coverage of 102% and support for color calibration make the display suitable for color-sensitive work
  • VESA mount compatibility and portrait mode rotation provide meaningful flexibility in how and where the monitor can be positioned
Cons
  • A single HDMI 2.0 port and one VGA connector offer very limited input options, with no DisplayPort or USB Type-C available
  • There are no USB ports on the monitor, so it cannot function as a hub for connected peripherals
  • The absence of a 3.5 mm audio jack means audio passthrough to headphones or speakers is not possible directly from the monitor
  • At 81 ppi, pixel density is relatively low for a 27-inch screen at 1080p resolution, which may result in visible individual pixels at close viewing distances
  • Typical brightness of 250 nits may be insufficient in very bright environments
  • The stand does not support swivel adjustment, limiting horizontal repositioning without moving the entire unit
Who is this for?

This monitor suits users who need a reliable everyday display for general productivity, office work, or casual gaming. The 144Hz refresh rate paired with AMD FreeSync makes it a reasonable fit for gamers who play at moderate settings and want smoother motion without screen tearing. The wide 178-degree IPS viewing angles and 102% sRGB coverage also make it a workable option for users engaged in color-sensitive tasks like photo editing or graphic design at a basic level, particularly those who can take advantage of the built-in color calibration support. The VESA mount compatibility and portrait mode rotation add practical value for users building multi-monitor setups or working in vertically oriented workflows.

Who is this NOT for?

Users who rely on a monitor as a connectivity hub will find this display limiting, as it offers no USB ports, no USB Type-C, and no 3.5 mm audio jack, making it a poor fit for those who need to connect peripherals or headphones directly. The 1920x1080 resolution across a 27-inch panel results in a pixel density of just 81 ppi, which is likely to feel soft to users who work with fine text, detailed imagery, or high-resolution content at close range. Additionally, professionals in high-end color-critical environments or those requiring HDR, deep blacks, or a wide color gamut beyond sRGB would find the 250-nit brightness ceiling and 1500:1 contrast ratio insufficient for demanding visual production work.

Display:

Display type LED-backlit, LCD, IPS
response time 1 ms
screen size 27"
resolution 1920 x 1080 px
pixel density 81 ppi
Adaptive synchronization AMD FreeSync
has anti-glare coating
refresh rate 144Hz
maximum horizontal viewing angle 178º
maximum vertical viewing angle 178º
has a matte panel
has a glossy panel
has a touch screen

The display uses an IPS panel with LED backlighting, spanning 27 inches at a resolution of 1920 x 1080 pixels and a pixel density of 81 ppi. It supports a 144Hz refresh rate alongside a 1ms response time, and includes AMD FreeSync adaptive synchronization to help maintain smooth output. Viewing angles reach 178 degrees on both the horizontal and vertical axes, and the matte, anti-glare panel reduces reflections without a glossy finish. The screen does not support touch input.

General info:

Type Standard
supports total tilt
Has a swivel stand
Supports VESA mount
height 362 mm
width 613 mm
thickness 49 mm
weight 4050 g
supports portrait mode
volume 10873.394 cm³

This is a standard-type monitor measuring 613 mm wide, 362 mm tall, and 49 mm thick, with a total weight of 4050 g and a volume of 10873.394 cm³. The stand supports tilt adjustment and portrait mode rotation, though it does not include swivel functionality. VESA mount support is available for users who prefer to wall-mount or use a third-party arm instead of the included stand.

Colors:

brightness (typical) 250 nits
supports color calibration
display colors 16.7 million
bit depth 8-bit
contrast ratio 1500:1
sRGB coverage 102%

The display renders 16.7 million colors at an 8-bit depth, with an sRGB coverage of 102% and a contrast ratio of 1500:1. Typical brightness is rated at 250 nits, and the monitor supports color calibration for users who need to adjust color output to a specific profile.

Connectivity:

HDMI ports 1
supports Thunderbolt
DisplayPort outputs 0
has a socket for a 3.5 mm audio jack
has a DVI connector
USB ports 0
Has USB Type-C
HDMI version HDMI 2.0
supports Ethernet
supports Wi-Fi
has AirPlay
mini DisplayPort outputs 0
has a VGA connector

Connectivity on this monitor is limited to a single HDMI 2.0 port and a VGA connector, with no DisplayPort, mini DisplayPort, DVI, or USB Type-C inputs available. There are no USB ports of any kind, and the monitor lacks a 3.5 mm audio jack. Wireless options are absent as well, with no support for Wi-Fi, Ethernet, or AirPlay.

Power:

Features:

has PiP
has stereo speakers
has built-in smart TV
has a remote control
supports Dolby Digital
supports Dolby Digital Plus
has DTS Surround
has an ambient light sensor
has a front camera

This monitor does not include any of the additional features covered in this section. There are no built-in speakers, no audio format support such as Dolby Digital, Dolby Digital Plus, or DTS Surround, and no Picture-in-Picture functionality. It also lacks a front camera, an ambient light sensor, a remote control, and any built-in smart TV capabilities.

Final Verdict

The MSI Pro MP273L E14 is a straightforward 27-inch IPS monitor that covers the essentials for everyday computing and casual gaming without overreaching. Its most compelling attribute is the 144Hz refresh rate with AMD FreeSync support, which delivers noticeably smoother motion handling than standard 60Hz displays, while the wide viewing angles and 102% sRGB coverage add genuine value for users with basic color work needs. That said, the limited connectivity — just one HDMI 2.0 port and a VGA connector, with no USB ports or audio output — and the modest pixel density of 81 ppi at this screen size mean it is best suited to users with straightforward requirements rather than those demanding a versatile or detail-rich workstation display. For general office use or entry-level gaming where smooth performance matters more than pixel sharpness or peripheral integration, it represents a focused and functional option.