TurboVS
Noise Airwave Max 6 specifications and in-depth review

Noise Airwave Max 6

Manufacturer: Noise

The Noise Airwave Max 6 is an over-ear headphone that covers a broad range of use cases, from daily commutes to extended listening sessions. Weighing 251.4 g, it folds for easy storage and ships with a travel bag, making it reasonably portable. The unit supports both wired and wireless operation, includes a detachable, tangle-free cable, and carries an IPX5 water-resistance rating, adding a degree of durability for outdoor use.

On the technical side, the Airwave Max 6 is built around 40 mm driver units covering a 20 Hz to 20 Hz frequency range and pairs active noise cancellation with passive noise isolation. Battery life is rated at 120 hours, with a 1.5-hour charge time via USB Type-C. Bluetooth 6 is on board alongside LDAC and AAC codec support, while an 80 ms audio latency figure and a 10 m maximum wireless range round out the connectivity profile. A four-microphone array handles calls and voice input, ambient sound mode is included, and multipoint connectivity supports simultaneous pairing with two devices.

Pros
  • 120-hour battery life means the headphones can go extended periods between charges, and a full recharge takes only 1.5 hours via USB Type-C
  • Foldable design combined with an included travel bag makes them practical to carry and store when not in use
  • IPX5 water resistance provides reliable protection against splashes and light rain during outdoor use
  • LDAC codec support alongside Bluetooth 6 allows for high-quality wireless audio transmission
  • A four-microphone noise-canceling array makes the headphones capable for calls in addition to music listening
  • Multipoint connectivity allows simultaneous pairing with two devices, reducing the need to manually switch connections
Cons
  • No wireless charging support, so the headphones must always be physically connected to charge
  • Wireless Bluetooth range is limited to 10 m, which may be restrictive in larger spaces
  • In/on-ear detection is absent, meaning playback does not pause automatically when the headphones are removed
  • No NFC pairing support, making initial Bluetooth setup slightly less convenient on compatible devices
  • The headphones do not support aptX in any of its variants, which limits high-quality audio options for devices that rely on the aptX codec family
Who is this for?

These headphones are well-suited to users who need reliable all-day or multi-day wireless listening without frequent charging, given the 120-hour battery life. The combination of active noise cancellation, passive noise isolation, and ambient sound mode makes them a practical choice for commuters, travelers, or those working in noisy environments who want control over how much of their surroundings they hear. The IPX5 water resistance and foldable build with an included travel bag also make them a reasonable fit for on-the-go and outdoor use, while the four-microphone noise-canceling array and headset capability suit users who frequently take calls or participate in voice meetings.

Who is this NOT for?

Users who prioritize lossless or low-latency wireless audio may find the connectivity options limiting, as aptX, aptX HD, aptX Lossless, and aptX Low Latency are all absent, and the 80 ms Bluetooth latency makes the headphones less suitable for activities like gaming or video editing where tight audio sync is important. Those who prefer headphones that pause automatically when taken off will not find that convenience here, as in/on-ear detection is not supported. Additionally, users who rely on NFC for quick wireless pairing, or who want the flexibility of wireless charging, will need to work around those absences in their daily routine.

Design:

Fit Over-ear
weight 251.4 g
has a detachable cable ✓
Ingress Protection (IP) rating IPX5
water resistance Water resistant
can be folded ✓
is designed for kids ✕
has a tangle free cable ✓
travel bag is included ✓
has an open-back design ✕
has stereo speakers ✓

The Noise Airwave Max 6 uses an over-ear fit and weighs 251.4 g, sitting on the lighter side for a full-size headphone. It features a foldable build and comes bundled with a travel bag, making it straightforward to pack away. The cable is both detachable and tangle-free, offering flexibility for wired use. With a closed-back design and stereo speakers, it is built for personal listening rather than open, shared sound. The headphones carry an IPX5 water-resistance rating, meaning they can handle splashes and light moisture without issue, though they are not designed specifically for children.

Sound quality:

has active noise cancellation (ANC) ✓
lowest frequency 20 Hz
highest frequency 20 Hz
driver unit size 40 mm
supports spatial audio ✓
has a neodymium magnet ✕
has passive noise reduction ✓

The Noise Airwave Max 6 handles noise reduction on two fronts, combining active noise cancellation (ANC) with passive noise isolation to reduce unwanted ambient sound. Audio is driven by 40 mm driver units, and the headphones cover a frequency range from 20 Hz on the low end to 20 Hz at the top end as listed in the specifications. Spatial audio is supported, adding a dimensional quality to compatible content. The drivers do not use a neodymium magnet configuration.

Power:

Battery life 120 hours
charge time 1.5 hours
Has USB Type-C ✓
has a battery level indicator ✓
has wireless charging ✕
Has a solar power battery ✕
has a rechargeable battery ✓
has a removable battery ✕

The Noise Airwave Max 6 is equipped with a rechargeable battery rated at 120 hours of battery life, and the battery is not removable. Charging is handled via USB Type-C with a charge time of 1.5 hours, though wireless and solar charging are not supported. A battery level indicator is built in, giving users a straightforward way to monitor remaining charge.

Connectivity:

connectivity Wireless & wired
Bluetooth version 6
has aptX Adaptive ✕
has aptX ✕
has LDAC ✓
has LDHC ✕
has Bluetooth LE Audio ✕
has aptX Low Latency ✕
has aptX HD ✕
has aptX Lossless ✕
has AAC ✓
has Auracast ✕
audio latency 80 ms
maximum Bluetooth range 10 m
has fast pairing ✓
supports Bluetooth pairing using NFC ✕

The Noise Airwave Max 6 supports both wireless and wired connectivity, with the wireless side running on Bluetooth 6 and offering a maximum range of 10 m. For audio codecs, LDAC and AAC are supported, while aptX, aptX HD, aptX Adaptive, aptX Low Latency, aptX Lossless, and LDHC are not. Bluetooth LE Audio and Auracast are also absent. Audio latency over Bluetooth is listed at 80 ms. Fast pairing is available for quicker wireless setup, though NFC-based pairing is not supported.

Features:

release date February 2026
has a noise-canceling microphone ✓
has ambient sound mode ✓
has in/on-ear detection ✕
number of microphones 4
multipoint count 2
control panel placed on a device ✓
can be used as a headset ✓
Has an in-line control panel ✕

The Noise Airwave Max 6 includes a four-microphone array with noise cancellation, making it usable as a headset for calls and voice applications. Ambient sound mode is on board, allowing users to let in external audio when needed. Controls are handled through a panel placed directly on the headphone unit itself, with no in-line control panel on the cable. Multipoint connectivity supports two devices simultaneously, and the headphones do not feature automatic in/on-ear detection to pause playback.

Final Verdict

The Noise Airwave Max 6 is a feature-complete over-ear headphone that covers the essentials for everyday wireless listening with few compromises on convenience. Its most compelling attribute is the 120-hour battery life paired with a 1.5-hour USB-C charge time, which removes battery anxiety from the equation almost entirely. Add active noise cancellation, passive isolation, LDAC support, a foldable design, and IPX5 water resistance, and the package is well-rounded for commuters, travelers, and regular daily users. Where it falls short — notably the absence of aptX codecs, 80 ms Bluetooth latency, and no in-ear detection — matters more to specific user segments like gamers or audiophiles with aptX-dependent devices than it does to the general listener. For users who want dependable, long-lasting wireless headphones with solid noise management and call capability, the Airwave Max 6 makes a coherent and practical case for itself.