TurboVS
Oloy Blade DDR4-3600 C18 32GB (2x16GB) specifications and in-depth review

Oloy Blade DDR4-3600 C18 32GB (2x16GB)

Manufacturer: Oloy

The OLOy Blade DDR4-3600 is a dual-module desktop memory kit designed for systems that support DDR4. Offered in a 2x16GB configuration for a total of 32GB, it uses a standard 288-pin DIMM form factor and fits within a relatively compact 39mm height, making it compatible with a wide range of mid-tower and full-tower builds. An integrated heatsink is included, and the kit foregoes RGB lighting in favor of a more understated appearance.

On the technical side, the kit is rated to run at 3600 MHz with CL18-22-22-42 timings, which translates to a true latency of 10 ns at its tested speed. The SPD default sits at 2133 MHz, with the higher 3600 MHz profile activated through Intel XMP 2.0. Operating voltage is set at 1.35V, ECC is not supported, and the modules do not use Samsung B-Die memory.

Pros
  • Supports Intel XMP 2.0, enabling the 3600 MHz rated speed to be activated through the BIOS without manual timing configuration
  • Includes an integrated heatsink to help dissipate heat during operation
  • Total capacity of 32GB across two modules suits memory-intensive workloads
  • At 39 mm in height, the modules are relatively low-profile, reducing the likelihood of clearance conflicts with CPU coolers
  • Operates at 1.35V, which is within the standard DDR4 voltage range
Cons
  • CAS Latency of 18 is on the higher side for a 3600 MHz kit, resulting in a true latency of 10 ns
  • SPD speed defaults to 2133 MHz, meaning XMP must be manually enabled to reach the rated 3600 MHz
  • Does not support ECC memory, ruling it out for error-sensitive or server-grade applications
  • Does not use Samsung B-Die, which some users specifically seek out for overclocking headroom
Who is this for?

This kit is a reasonable fit for desktop users building a general-purpose or mid-range system who need a solid 32GB total capacity across two channels. The Intel XMP 2.0 support makes it straightforward to enable the 3600 MHz rated frequency on compatible platforms without manual tuning, which suits users who prefer a simpler setup process. The low-profile 39 mm height also makes it a practical choice for builds where CPU cooler clearance is a concern.

Who is this NOT for?

Users focused on maximizing overclocking potential may find this kit limiting, as it does not use Samsung B-Die memory, which is often preferred for pushing beyond rated frequencies. The CL18 CAS Latency makes it a poor match for those who prioritize low-latency memory for latency-sensitive tasks. Additionally, since ECC is not supported, it is entirely unsuitable for workstation or server environments where memory error correction is a requirement.

Performance:

true latency 10 ns
memory speed (Tested Speed) 3600
memory speed (SPD) 2133 MHz
DDR memory version 4
CAS Latency (CL) 18
tRAS timing 42
tRCD timing 22
tRP timing 22

The OLOy Blade DDR4-3600 operates as a DDR4 module with a tested speed of 3600 MHz, while its SPD default sits at 2133 MHz, meaning the higher frequency requires XMP activation. The primary timings are CL18-22-22-42, covering CAS Latency, tRCD, tRP, and tRAS respectively, which together produce a true latency of 10 ns at the rated speed.

General info:

form factor 288-pin DIMM
memory size (total) 2 x 16GB
has Samsung B-Die ✕
voltage 1.35V
height 39 mm
memory size 16GB

This kit uses the standard 288-pin DIMM form factor and consists of two 16GB modules for a total of 32GB. Each module stands 39 mm tall and operates at a voltage of 1.35V. The modules do not use Samsung B-Die memory.

Features:

Intel XMP / AMD EXPO Intel XMP 2.0
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✕

The kit supports Intel XMP 2.0, allowing the higher rated frequency to be enabled through the motherboard BIOS. An integrated heatsink is included to help manage heat during operation. ECC memory is not supported, and the modules do not feature RGB lighting.

Benchmarks:

Final Verdict

The OLOy Blade DDR4-3600 is a straightforward DDR4 desktop memory kit that delivers a 32GB dual-channel configuration with Intel XMP 2.0 support for reaching its 3600 MHz rated speed without manual tuning. Its integrated heatsink and modest 39 mm height add practical value for a range of standard desktop builds. That said, the CL18 timings and the absence of Samsung B-Die place it outside the consideration set for users who demand low latency or extended overclocking flexibility. For a general-purpose desktop build where capacity and ease of setup matter more than outright tuning potential, this kit covers the essentials reliably.