TurboVS
Orico e7400 2TB specifications and in-depth review

Orico e7400 2TB

Manufacturer: Orico

The Orico e7400 2TB is an M.2 NVMe solid-state drive built around the MaxioTech MAP1602A Falcon Lite controller, offering sequential read speeds of up to 7400 MB/s and sequential write speeds reaching 6800 MB/s. It ships without an integrated heatsink or RGB lighting, keeping the design straightforward and focused on core storage performance.

Running on the PCIe 4.0 interface with NVMe version 2, the drive uses QLC NAND storage and relies on Host Memory Buffer caching rather than dedicated DRAM. The four-channel controller supports random read performance of up to 1,000,000 IOPS and random write performance of up to 800,000 IOPS. Orico rates the drive for a maximum operating temperature of 70 °C, a total endurance of 1200 TBW, and backs it with a five-year warranty.

Pros
  • Sequential read speed of 7400 MB/s and write speed of 6800 MB/s indicate strong throughput for large file operations
  • Random read performance reaches 1,000,000 IOPS, supporting demanding workloads with frequent small file access
  • Backed by a 5-year warranty, which is a solid coverage period for a storage device
  • TBW rating of 1200 terabytes reflects reasonable long-term endurance for a 2TB QLC drive
  • Uses the NVMe 2 protocol over PCIe 4.0, representing a current-generation interface standard
  • No integrated heatsink or RGB lighting keeps the physical footprint minimal and avoids unnecessary bulk
Cons
  • QLC NAND typically offers lower write endurance per cell compared to TLC or MLC alternatives, which is reflected in the relatively moderate TBW figure for the capacity
  • Relies on Host Memory Buffer instead of dedicated DRAM cache, which can affect sustained performance consistency under heavy mixed workloads
  • Absence of an integrated heatsink means thermal management depends entirely on the host system or motherboard solution
  • Four controller channels may limit parallelism compared to higher-channel configurations available in other drives at this capacity
Who is this for?

This drive is well-suited for users who regularly work with large sequential file transfers, such as those handling video editing projects, high-capacity backups, or operating system and application installations that benefit from the 7400 MB/s read throughput. The PCIe 4.0 interface with NVMe 2 support also makes it a practical fit for current-generation desktop and laptop builds that can take full advantage of the bandwidth. With a 2TB capacity and a 1200 TBW endurance rating backed by a five-year warranty, it also serves users who need substantial storage headroom for long-term daily use without frequent drive replacements.

Who is this NOT for?

Users running sustained heavy write workloads — such as database servers, high-frequency logging systems, or professional NAS environments — may find the QLC NAND and HMB-based caching less consistent under prolonged stress compared to drives with dedicated DRAM and higher-endurance NAND. The lack of an integrated heatsink makes it a less reliable fit for systems with poor airflow or high-ambient-temperature enclosures, where thermal throttling could become a concern during intensive use. It is also not a practical choice for users with platforms limited to PCIe 3.0 or older interfaces, as they would be unable to utilize the drive's full performance potential.

Read speed:

sequential read speed 7400 MB/s
random read speed 1000000 IOPS

The Orico e7400 2TB delivers a sequential read speed of 7400 MB/s, making it well-suited for handling large file transfers and data-intensive workloads. On the random side, it reaches 1,000,000 IOPS, reflecting strong performance when accessing smaller, scattered data across the drive.

Write speed:

sequential write speed 6800 MB/s
random write speed 800000 IOPS

The Orico e7400 2TB supports a sequential write speed of 6800 MB/s, allowing large volumes of data to be written to the drive at a sustained pace. For workloads that involve writing many small files in rapid succession, the drive is rated at 800,000 random write IOPS, indicating solid throughput under fragmented write conditions.

Benchmarks:

General info:

type M2
SSD cache HMB (Host Memory Buffer)
Is an NVMe SSD ✓
NVMe version 2
internal storage 2000GB
controller MaxioTech MAP1602A Falcon Lite
SSD storage type QLC
PCI Express (PCIe) version 4
Controller channels 4
Terabytes Written (TBW) 1200
warranty period 5 years
Has an integrated heatsink ✕
maximum operating temperature 70 °C
has RGB lighting ✕

The Orico e7400 2TB is an M.2 NVMe SSD running on PCIe 4.0 with NVMe version 2, offering 2000GB of internal storage built on QLC NAND. It is powered by the MaxioTech MAP1602A Falcon Lite controller with 4 channels, and uses Host Memory Buffer caching in place of dedicated DRAM. The drive carries a TBW rating of 1200 terabytes and a maximum operating temperature of 70 °C, with a 5-year warranty included. It does not feature an integrated heatsink or RGB lighting.

Final Verdict

The Orico e7400 2TB is a capable M.2 NVMe SSD that delivers on its core promise of high sequential throughput, with 7400 MB/s read and 6800 MB/s write speeds making it a dependable choice for users on PCIe 4.0 platforms who regularly move large amounts of data. The MaxioTech MAP1602A Falcon Lite controller, NVMe 2 protocol support, and 2TB capacity give it a well-rounded technical foundation for everyday and prosumer workloads alike. However, its reliance on Host Memory Buffer caching and QLC NAND means it is best matched to mixed general-purpose use rather than write-heavy professional environments. Backed by a five-year warranty and a 1200 TBW endurance rating, it represents a straightforward, no-frills storage option for users who prioritize capacity and read performance within a current-generation form factor.