TurboVS
Orico IG740 Pro 2TB specifications and in-depth review

Orico IG740 Pro 2TB

Manufacturer: Orico

The Orico IG740 Pro 2TB is a 2TB M.2 NVMe solid-state drive built around the PCIe 4.0 interface, targeting users who need high-throughput storage in a compact form factor. It uses the MaxioTech MAP1602A Falcon Lite controller paired with TLC NAND flash memory, and relies on HMB (Host Memory Buffer) caching rather than dedicated DRAM. The drive ships without an integrated heatsink or RGB lighting, keeping the hardware profile straightforward.

On the performance side, the Orico IG740 Pro 2TB is rated for sequential read and write speeds of 7400 MB/s and 6500 MB/s respectively, alongside random read performance of 1,000,000 IOPS and random write performance of 900,000 IOPS. The controller operates across four channels and supports NVMe version 2. Endurance is specified at 1,200 TBW with an MTBF figure of 1.5 million hours, and Orico backs the drive with a five-year warranty.

Pros
  • Sequential read speed of 7400 MB/s and write speed of 6500 MB/s indicate strong sustained throughput for large file operations
  • Random read performance of 1,000,000 IOPS and random write of 900,000 IOPS reflect capable handling of small, scattered data access patterns
  • A TBW rating of 1200 terabytes provides a concrete endurance figure suitable for sustained workloads over the drive's lifespan
  • The five-year warranty offers a longer coverage period than many drives in this category
  • NVMe version 2 support reflects a more current protocol implementation
  • MTBF of 1.5 million hours points to a solid reliability specification for everyday and demanding use
Cons
  • No integrated heatsink means thermal management depends entirely on the host system or separately sourced cooling solutions
  • HMB caching relies on the host system's RAM rather than dedicated onboard DRAM, which ties cache performance to system memory availability
  • The four-channel controller configuration may limit parallelism compared to eight-channel designs, potentially affecting sustained workload consistency
Who is this for?

This drive is well-suited to users who regularly work with large sequential workloads such as video editing, data processing, or software compilation, where its 7400 MB/s read and 6500 MB/s write speeds translate directly into faster file handling. System builders looking for a reliable everyday drive will also benefit from its NVMe version 2 over PCIe 4.0 interface and solid endurance ratings, while the 1200 TBW figure and 1.5 million hour MTBF make it a reasonable fit for machines that see consistent, prolonged use. The five-year warranty adds a layer of reassurance for those who want long-term coverage without additional planning.

Who is this NOT for?

Users who run thermally demanding sustained workloads in cases with poor airflow may find the drive throttles without an integrated heatsink, since all thermal dissipation depends on the host system. Workloads that stress cache-intensive operations — such as heavy database activity or continuous random writes — could be affected by the reliance on HMB caching, which draws from system RAM rather than a dedicated onboard buffer, making performance more sensitive to the host configuration. Additionally, users on platforms that do not support PCIe 4.0 or NVMe version 2 will not be able to take full advantage of the drive's specified throughput capabilities.

Read speed:

sequential read speed 7400 MB/s
random read speed 1000000 IOPS

The Orico IG740 Pro 2TB delivers a sequential read speed of 7400 MB/s, making it capable of handling large file transfers at a sustained pace. On the random side, it reaches 1,000,000 IOPS, reflecting strong performance when dealing with scattered, small-block data typical of everyday workloads.

Write speed:

sequential write speed 6500 MB/s
random write speed 900000 IOPS

The Orico IG740 Pro 2TB is rated for a sequential write speed of 6500 MB/s, allowing large volumes of data to be written at a consistent throughput. Its random write performance is specified at 900,000 IOPS, indicating solid responsiveness when handling the kind of fragmented write operations common in active system environments.

Benchmarks:

General info:

type M2
SSD cache HMB (Host Memory Buffer)
Is an NVMe SSD ✓
NVMe version 2
internal storage 2000GB
controller MaxioTech MAP1602A Falcon Lite
SSD storage type TLC
PCI Express (PCIe) version 4
Controller channels 4
Terabytes Written (TBW) 1200
MTBF 1.5million hours
warranty period 5 years
Has an integrated heatsink ✕
has RGB lighting ✕

The Orico IG740 Pro 2TB is an M.2 NVMe SSD conforming to NVMe version 2 and running over a PCIe 4.0 interface, with 2000GB of internal storage built on TLC NAND flash. It is powered by the MaxioTech MAP1602A Falcon Lite controller operating across four channels, and uses HMB (Host Memory Buffer) in place of dedicated onboard cache. Endurance is rated at 1200 TBW with an MTBF of 1.5 million hours, and the drive is backed by a five-year warranty. It does not include an integrated heatsink or RGB lighting.

Final Verdict

The Orico IG740 Pro 2TB presents a well-rounded specification sheet for an M.2 PCIe 4.0 NVMe drive, with its 7400 MB/s sequential read speed and 1200 TBW endurance rating standing out as the most tangible markers of its intended use profile. Built around the MaxioTech MAP1602A Falcon Lite controller with TLC NAND and HMB caching, it covers the fundamentals competently — NVMe version 2 support, a five-year warranty, and an MTBF of 1.5 million hours all reinforce its suitability for sustained everyday and workstation use. Users who can pair it with adequate system cooling and a compatible PCIe 4.0 platform will get the most out of what it offers; those with tighter thermal constraints or cache-sensitive workloads should factor in its lack of an onboard DRAM buffer and integrated heatsink. Overall, the Orico IG740 Pro 2TB is a technically capable drive that delivers solid throughput and reasonable long-term reliability for users whose systems are equipped to support it fully.