TurboVS
Patriot Viper Elite 5 DDR5-7000 32GB (2x16GB) specifications and in-depth review

Patriot Viper Elite 5 DDR5-7000 32GB (2x16GB)

Manufacturer: Patriot

The Patriot Viper Elite 5 DDR5-7000 is a dual-module desktop memory kit designed for DDR5 platforms, offering a total capacity of 32GB across two 16GB modules. It operates at a tested speed of 7000 MHz and carries Intel XMP 3.0 support for straightforward profile-based configuration. The kit includes an integrated heatsink and forgoes RGB lighting, keeping its profile focused on thermal management rather than aesthetics. At 44 mm tall, it fits within a standard 288-pin DIMM form factor.

On the timing side, the Viper Elite 5 DDR5-7000 runs with a CAS latency of CL38, accompanied by tRCD and tRP values of 48 and a tRAS of 88, which translates to a true latency of approximately 10.86 ns at its rated speed. The kit operates at 1.45V, stepping above the DDR5 baseline to sustain its higher frequency. Its SPD speed is rated at 4800 MHz, meaning it will default to that frequency without an XMP profile active. ECC support is not included, and the modules do not use Samsung B-Die.

Pros
  • Runs at a tested speed of 7000 MHz, well above the DDR5 baseline, offering a meaningful step up from standard out-of-the-box frequencies
  • Intel XMP 3.0 support allows the kit to reach its rated speed automatically on compatible motherboards without manual tuning
  • Includes an integrated heatsink to assist with heat dissipation during sustained operation
  • At 44 mm tall, the module height is relatively compact, reducing the likelihood of clearance conflicts with large CPU coolers
  • The absence of RGB lighting keeps the build straightforward and avoids the added complexity of lighting software or synchronization
Cons
  • SPD speed defaults to 4800 MHz, meaning XMP must be manually enabled to reach the rated 7000 MHz frequency
  • Does not use Samsung B-Die, which some users specifically seek out for overclocking headroom beyond rated speeds
  • ECC memory support is not available, limiting use to standard consumer desktop configurations
  • CL38 timings at 7000 MHz, while resulting in a true latency of 10.86 ns, reflect relatively loose primary timings for this speed tier
  • Operating voltage of 1.45V is higher than the DDR5 base specification, which may be a consideration for systems with strict power delivery constraints
Who is this for?

This kit is well-suited for desktop builders targeting high-frequency DDR5 platforms who want to push beyond standard speeds without manual overclocking, thanks to Intel XMP 3.0 support that automates configuration on compatible motherboards. The 32GB total capacity across two modules makes it a practical fit for demanding workloads such as content creation, video editing, or heavily multitasked gaming sessions where memory headroom matters. The integrated heatsink and relatively low-profile 44 mm height also make it a reasonable choice for builds with tighter cooler clearance requirements where taller RGB-heavy modules would be problematic.

Who is this NOT for?

This kit is not a good fit for users building on AMD EXPO-dependent platforms, as it only supports Intel XMP 3.0 and lacks EXPO certification for optimized out-of-the-box performance on AMD systems. Those who specifically prioritize Samsung B-Die memory for aggressive manual overclocking beyond rated speeds will need to look elsewhere, as these modules do not use that integrated circuit. It is also unsuitable for any workstation or server environment requiring ECC memory support, since error-correcting capability is entirely absent from this kit.

Performance:

true latency 10.86 ns
memory speed (Tested Speed) 7000
memory speed (SPD) 4800 MHz
DDR memory version 5
CAS Latency (CL) 38
tRAS timing 88
tRCD timing 48
tRP timing 48

The Performance section of this DDR5 kit centers on a tested speed of 7000 MHz, well above its SPD-rated 4800 MHz baseline, which reflects the frequency achieved under an active XMP profile. Timings are set at CL38-48-48-88, covering CAS latency, tRCD, tRP, and tRAS respectively, and these figures combine with the operating frequency to yield a true latency of 10.86 ns. The module conforms to the DDR5 memory standard, placing it within the current generation of desktop memory architecture.

General info:

form factor 288-pin DIMM
memory size (total) 2 x 16GB
has Samsung B-Die ✕
voltage 1.45V
height 44 mm
memory size 16GB

This kit uses the standard 288-pin DIMM form factor and consists of two 16GB modules for a total installed capacity of 32GB. Each module stands 44 mm tall and operates at 1.45V. The modules do not use Samsung B-Die integrated circuits.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✕

The kit supports Intel XMP 3.0 for automatic frequency and timing configuration on compatible platforms. An integrated heatsink is included to help manage thermals during operation. RGB lighting is not present, and ECC memory support is not available on these modules.

Benchmarks:

Final Verdict

The Patriot Viper Elite 5 DDR5-7000 32GB (2x16GB) is a capable DDR5 kit built around a clear purpose: delivering a high tested frequency with minimal setup friction through Intel XMP 3.0 automation. Its 7000 MHz operating speed, paired with an integrated heatsink and a practical 44 mm height, makes it a sensible choice for Intel-platform desktop builds that prioritize memory throughput and thermal management without the overhead of RGB hardware. The kit's scope is narrowed by its absence of AMD EXPO support and ECC capability, and those chasing extreme manual overclocking may find the non-B-Die configuration a limiting factor. Within its intended use case, however, it delivers a well-rounded DDR5 package for users who want meaningful frequency headroom above the DDR5 baseline and straightforward XMP-based configuration.

Popular Comparisons

Patriot Viper Elite 5 DDR5-7000 32GB (2x16GB)
Patriot Viper Elite 5 DDR5-7000 32GB (2x16GB)
VS
Patriot Viper Venom DDR5-6400 C32 32GB (2x16GB)
Patriot Viper Venom DDR5-6400 C32 32GB (2x16GB)
Patriot Viper Elite 5 DDR5-7000 32GB (2x16GB)
Patriot Viper Elite 5 DDR5-7000 32GB (2x16GB)
VS
Patriot Viper Venom DDR5-6000 C30 32GB (1x32GB)
Patriot Viper Venom DDR5-6000 C30 32GB (1x32GB)
Patriot Viper Elite 5 DDR5-7000 32GB (2x16GB)
Patriot Viper Elite 5 DDR5-7000 32GB (2x16GB)
VS
Patriot Viper Venom DDR5-6000 C30 48GB (2x24GB)
Patriot Viper Venom DDR5-6000 C30 48GB (2x24GB)