TurboVS
Patriot Viper Venom RGB DDR5-5600 C36 16GB (1x16GB) specifications and in-depth review

Patriot Viper Venom RGB DDR5-5600 C36 16GB (1x16GB)

Manufacturer: Patriot

The Patriot Viper Venom RGB DDR5-5600 is a single-module DDR5 memory kit aimed at desktop systems that support the latest generation of memory technology. It comes as a 16GB stick in a 288-pin DIMM form factor, making it a straightforward option for builds that benefit from expandable configurations. The module features an integrated heatsink alongside RGB lighting, giving it a visible presence inside a windowed chassis.

Operating at a tested speed of 5600 MHz with primary timings of CL36-36-36-68, the module delivers a true latency of 13.85 ns at 1.25V. Its SPD base speed sits at 4800 MHz, with higher performance unlocked through Intel XMP 3.0 or AMD EXPO profiles. The kit does not use Samsung B-Die and does not support ECC memory. At 43 mm tall, it falls within a moderate height range that should clear most air coolers.

Pros
  • Supports both Intel XMP 3.0 and AMD EXPO profiles, making it compatible with a wide range of modern platforms without manual tuning
  • Includes an integrated heatsink to help manage heat during operation
  • RGB lighting is built in for users who want visible illumination inside their system
  • Runs at 5600 MHz tested speed, stepping up from the 4800 MHz SPD base when the appropriate profile is activated
  • Operates at 1.25V, which is a relatively modest voltage for a DDR5 module running at this speed
Cons
  • Ships as a single 16GB module, which limits out-of-the-box dual-channel capability
  • Does not use Samsung B-Die, which may matter to users who prioritize that chip type for manual overclocking
  • ECC memory is not supported, ruling it out for workloads that require error-correcting memory
  • At 43 mm tall, the heatsink height could conflict with certain large air coolers depending on the case and motherboard layout
Who is this for?

This module is a practical fit for users building or upgrading a desktop system on a platform that supports Intel XMP 3.0 or AMD EXPO, since those profiles allow the full 5600 MHz rated speed to be reached without manual configuration. It suits those who want a straightforward single-stick starting point with room to add more capacity later, and the built-in heatsink and RGB lighting make it a reasonable choice for anyone assembling a system inside a windowed case where component visibility matters.

Who is this NOT for?

Users who intend to run dual-channel memory immediately will find a single-module kit limiting, as a matched pair would be needed to enable that configuration. It is also not appropriate for workstation or server environments that require ECC support for error-corrected memory operation. Additionally, those who specifically seek Samsung B-Die chips for aggressive manual overclocking will need to look elsewhere, since this module does not use that die type.

Performance:

true latency 13.85 ns
memory speed (Tested Speed) 5600
memory speed (SPD) 4800 MHz
DDR memory version 5
CAS Latency (CL) 36
tRAS timing 68
tRCD timing 36
tRP timing 36

The Patriot Viper Venom RGB DDR5-5600 operates on DDR5 and runs at a tested speed of 5600 MHz, stepping up from its SPD base of 4800 MHz when the appropriate profile is enabled. Its primary timings are set at CL36-36-36-68, covering CAS Latency, tRCD, tRP, and tRAS respectively, which translates to a true latency of 13.85 ns under those conditions.

General info:

form factor 288-pin DIMM
memory size (total) 1 x 16GB
has Samsung B-Die ✕
voltage 1.25V
height 43 mm
memory size 16GB

This module ships as a single 16GB stick in a standard 288-pin DIMM form factor, operating at 1.25V and standing 43 mm tall. It does not use Samsung B-Die memory chips, which is worth noting for those with specific overclocking preferences tied to die type.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0, AMD EXPO
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✓

The module supports both Intel XMP 3.0 and AMD EXPO profiles, allowing compatible platforms to automatically apply the rated speed and timings without manual configuration. It includes an integrated heatsink and RGB lighting, while ECC memory is not supported.

Benchmarks:

Final Verdict

The Patriot Viper Venom RGB DDR5-5600 is a single-module DDR5 kit that covers the essentials for a modern desktop build — offering a tested speed of 5600 MHz with broad platform compatibility through Intel XMP 3.0 and AMD EXPO support, an integrated heatsink, and RGB lighting for those who care about system aesthetics. Its single-stick configuration does mean dual-channel operation requires a second module, and the absence of ECC support and Samsung B-Die limits its appeal for specialized workloads or aggressive manual overclocking. For a straightforward DDR5 upgrade or starting point on a compatible Intel or AMD platform, however, it delivers a well-rounded specification set without unnecessary complexity.