TurboVS
Patriot Viper Venom RGB DDR5-6000 C30 16GB (1x16GB) specifications and in-depth review

Patriot Viper Venom RGB DDR5-6000 C30 16GB (1x16GB)

Manufacturer: Patriot

The Patriot Viper Venom RGB DDR5-6000 is a single-module DDR5 kit designed for desktop systems, offering 16GB of capacity in a standard 288-pin DIMM form factor. It operates at a tested speed of 6000 MHz, making it a notable option for users building or upgrading a DDR5-compatible platform. The module features an integrated heatsink and RGB lighting, giving it a visually distinctive appearance alongside its functional design.

On the technical side, the Viper Venom DDR5-6000 carries CL30-40-40-76 primary timings at 1.35V, with a true latency of 10 ns at its rated speed. Its SPD base speed is 4800 MHz, and it supports both Intel XMP 3.0 and AMD EXPO profiles for straightforward frequency enablement on compatible motherboards. The module does not use Samsung B-Die and does not support ECC, and it measures 43 mm in height, which may be relevant for builds using low-profile CPU coolers.

Pros
  • Supports both Intel XMP 3.0 and AMD EXPO profiles, making it compatible with a wider range of current desktop platforms
  • Tested speed of 6000 MHz is well above the DDR5 SPD baseline of 4800 MHz
  • Includes an integrated heatsink to help manage heat during operation
  • RGB lighting is built into the module for users who want a visually lit build
  • True latency of 10 ns at rated speed reflects a reasonable balance between frequency and access delay
Cons
  • Ships as a single 16GB module, so a dual-channel configuration requires purchasing a second unit separately
  • Does not use Samsung B-Die, which some users specifically seek out for overclocking headroom
  • CL30 primary timings are not among the tightest available at this frequency tier
  • At 43 mm tall, the module may create clearance issues with certain CPU coolers
  • ECC is not supported, ruling it out for workloads that require error-correcting memory
Who is this for?

This module is well-suited for desktop users building or upgrading a DDR5 platform who want a single 16GB stick running at a tested speed of 6000 MHz without manual tuning, thanks to its support for both Intel XMP 3.0 and AMD EXPO profiles. The integrated heatsink and RGB lighting also make it a practical fit for mid-range gaming builds where aesthetics and thermal management matter, and the 43 mm height should work comfortably in most standard ATX cases with typical cooler configurations.

Who is this NOT for?

Users who specifically require dual-channel memory out of the box will find this kit limiting, as it ships as a single module and a second purchase is needed to enable that configuration. It is also not appropriate for workstation or server environments that depend on ECC support for data integrity, and those prioritizing the tightest possible sub-timings at this frequency range may find the CL30-40-40-76 timing profile less appealing for latency-sensitive workloads.

Performance:

true latency 10 ns
memory speed (Tested Speed) 6000
memory speed (SPD) 4800 MHz
DDR memory version 5
CAS Latency (CL) 30
tRAS timing 76
tRCD timing 40
tRP timing 40

This DDR5 module has a tested speed of 6000 MHz, stepping up from its SPD base frequency of 4800 MHz when the appropriate XMP or EXPO profile is enabled. It runs with a CAS Latency of 30, accompanied by tRCD and tRP timings of 40 and a tRAS of 76, translating to a true latency of 10 ns at its rated speed. These timings reflect the balance the module strikes between clock frequency and access delay within the DDR5 specification.

General info:

form factor 288-pin DIMM
memory size (total) 1 x 16GB
has Samsung B-Die ✕
voltage 1.35V
height 43 mm
memory size 16GB

The module ships as a single 16GB DDR5 DIMM, using the standard 288-pin form factor common to desktop memory installations. It operates at 1.35V and stands 43 mm tall, which is worth noting for builds where cooler clearance is a concern. The module does not use Samsung B-Die integrated circuits.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0, AMD EXPO
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✓

The module supports both Intel XMP 3.0 and AMD EXPO profiles, allowing compatible motherboards to apply the rated frequency and timings automatically. It includes an integrated heatsink and RGB lighting, both of which are present on the physical module. ECC memory is not supported.

Benchmarks:

Final Verdict

The Patriot Viper Venom RGB DDR5-6000 is a straightforward single-module DDR5 kit that covers the essentials for a modern desktop build — a tested speed of 6000 MHz, broad platform compatibility through Intel XMP 3.0 and AMD EXPO support, and a heatsink-equipped design with RGB lighting. It is best suited to users assembling a DDR5 system who want reliable plug-and-play frequency enablement without manual tuning, though those planning a dual-channel setup or needing ECC support will need to look elsewhere. As a 16GB single-stick entry into the DDR5 space, it represents a clearly defined option for mainstream gaming and general-purpose desktop use.