TurboVS
Patriot Viper Xtreme 5 DDR5-7600 C36 32GB (2x16GB) specifications and in-depth review

Patriot Viper Xtreme 5 DDR5-7600 C36 32GB (2x16GB)

Manufacturer: Patriot

Patriot's Viper Xtreme 5 DDR5-7600 is a high-frequency desktop memory kit designed for systems that can take advantage of fast DDR5 operation. The kit ships as two 16GB modules for a combined 32GB of capacity, and each stick features an integrated heatsink to help manage thermal output during sustained workloads. Notably, the design foregoes RGB lighting entirely, keeping the aesthetic straightforward. Operating voltage sits at 1.45V, which reflects the demands of pushing DDR5 well beyond its base specification.

On the timing side, the modules run at a tested speed of 7600 MHz with a CAS Latency of 36, translating to a true latency of approximately 9.47 ns. Secondary timings are set at tRCD 48, tRP 48, and tRAS 84. The SPD-programmed speed is 5600 MHz, with the full 7600 MHz profile activated through Intel XMP 3.0. The modules use the standard 288-pin DIMM form factor, measure 44 mm in height, and do not support ECC or use Samsung B-Die memory chips.

Pros
  • Tested speed of 7600 MHz offers a substantial uplift over the 5600 MHz SPD baseline, making full use of the XMP 3.0 profile
  • Intel XMP 3.0 support allows the full frequency profile to be enabled with minimal manual configuration
  • Integrated heatsink helps manage heat output at the elevated 1.45V operating voltage
  • No RGB lighting keeps the physical footprint visually neutral, which suits builds where aesthetics are not a priority
  • 32GB total capacity across two modules provides a reasonable amount of memory for demanding workloads
Cons
  • CAS Latency of 36 is relatively high for a kit running at this speed, which tempers the true latency figure of 9.47 ns
  • Operating voltage of 1.45V is elevated compared to standard DDR5 specifications, which may be a consideration for power-sensitive builds
  • Does not use Samsung B-Die chips, which some users specifically seek out for manual overclocking flexibility
  • ECC is not supported, ruling out use cases where memory error correction is required
  • The 44 mm module height may create clearance conflicts with certain CPU coolers in compact builds
Who is this for?

This kit is well-suited to desktop builders targeting high-frequency DDR5 performance through Intel XMP 3.0-compatible platforms, where enabling the 7600 MHz profile requires no manual timing configuration. The 32GB dual-channel capacity makes it a practical fit for memory-intensive tasks such as content creation, video editing, or heavy multitasking workloads. Users who prefer a clean, utilitarian build aesthetic will also find the no-RGB heatsink design a natural match for understated system builds.

Who is this NOT for?

This kit is not well-suited to users who require ECC memory support, such as those running workstation or server environments where data integrity and error correction are essential. The elevated CAS Latency of 36 and 1.45V operating voltage make it a poor fit for users prioritizing tight timings or low power consumption over raw clock speed. Additionally, builders working with compact cases or low-profile CPU coolers may find the 44 mm module height a physical limitation, and those who specifically rely on Samsung B-Die chips for manual overclocking will need to look elsewhere.

Performance:

true latency 9.47 ns
memory speed (Tested Speed) 7600
memory speed (SPD) 5600 MHz
DDR memory version 5
CAS Latency (CL) 36
tRAS timing 84
tRCD timing 48
tRP timing 48

The Patriot Viper Xtreme 5 DDR5-7600 operates under the DDR5 standard and achieves a tested memory speed of 7600 MHz, well above its SPD-programmed frequency of 5600 MHz. The primary CAS Latency is set to 36, which at that speed works out to a true latency of 9.47 ns. Supporting timings are configured at tRCD 48, tRP 48, and tRAS 84, rounding out the full primary timing profile for this kit.

General info:

form factor 288-pin DIMM
memory size (total) 2 x 16GB
has Samsung B-Die ✕
voltage 1.45V
height 44 mm
memory size 16GB

This kit uses the standard 288-pin DIMM form factor and consists of two 16GB modules, bringing the total installed capacity to 32GB. Each module stands 44 mm tall and operates at a voltage of 1.45V. The kit does not use Samsung B-Die memory chips.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✕

The modules ship with an integrated heatsink and support Intel XMP 3.0 for straightforward frequency profile activation. RGB lighting is not included, giving the kit a plain, understated appearance. ECC memory is not supported.

Benchmarks:

Final Verdict

The Patriot Viper Xtreme 5 DDR5-7600 is a straightforward, no-frills DDR5 kit built around a single clear objective: delivering a high tested clock speed through an easy-to-activate Intel XMP 3.0 profile. Its 7600 MHz operating frequency combined with 32GB of dual-channel capacity makes it a competent choice for users on compatible Intel platforms who want meaningful memory bandwidth without investing time in manual tuning. The trade-offs — a CL36 primary latency, elevated voltage, and the absence of ECC support — define its boundaries clearly, and users who fall outside those boundaries will want to consider alternatives. Within its intended scope, however, this kit delivers a well-defined performance profile in a clean, heatsink-equipped package that suits productivity-focused desktop builds.