TurboVS
Patriot Viper Xtreme 5 RGB DDR5-6000 C30 32GB (2x16GB) specifications and in-depth review

Patriot Viper Xtreme 5 RGB DDR5-6000 C30 32GB (2x16GB)

Manufacturer: Patriot

The Patriot Viper Xtreme 5 RGB DDR5-6000 C30 is a 32GB dual-channel memory kit designed for desktop platforms. It ships as two 16GB 288-pin DIMM modules and features an integrated heatsink alongside RGB lighting, making it a visually distinctive option within the DDR5 memory category.

Operating at a tested speed of 6000 MHz with a native SPD speed of 4800 MHz, the kit runs at CL30-40-40-76 timings and a voltage of 1.35V. True latency comes in at 10 ns. Compatibility is covered through both Intel XMP 3.0 and AMD EXPO profiles, though the kit does not use Samsung B-Die ICs and does not support ECC. Module height is 44 mm.

Pros
  • Supports both Intel XMP 3.0 and AMD EXPO profiles, covering a wide range of compatible desktop platforms
  • Includes an integrated heatsink for thermal management during operation
  • RGB lighting is built in for users who want visual customization in their build
  • Tested speed of 6000 MHz with a true latency of 10 ns reflects a well-tuned timing configuration
  • Ships as a matched dual-channel kit, which simplifies installation and channel pairing
Cons
  • Does not support ECC memory, ruling it out for workloads that require error-correcting functionality
  • SPD speed is rated at 4800 MHz, meaning XMP or EXPO must be enabled manually to reach the advertised 6000 MHz
  • Does not use Samsung B-Die ICs, which may matter to users who specifically seek that memory configuration
  • At 44 mm tall, the heatsink height may cause clearance issues with certain CPU coolers
Who is this for?

This kit is well-suited for desktop system builders who want to take advantage of DDR5 on both Intel and AMD platforms, thanks to its native support for XMP 3.0 and EXPO profiles. The 6000 MHz tested speed with CL30 timings makes it a reasonable fit for users engaged in gaming or content creation workloads that benefit from higher memory bandwidth. Those who prioritize a visually cohesive build will also find the integrated heatsink and RGB lighting a practical match for illuminated setups.

Who is this NOT for?

This kit is not appropriate for server or workstation environments that depend on ECC memory for error correction and data integrity. Users who specifically seek Samsung B-Die ICs — often for aggressive manual overclocking beyond rated speeds — will need to look elsewhere, as this kit does not use that configuration. Additionally, builders using large tower CPU coolers with limited clearance may find the 44 mm module height a physical constraint depending on their specific cooler design.

Performance:

true latency 10 ns
memory speed (Tested Speed) 6000
memory speed (SPD) 4800 MHz
DDR memory version 5
CAS Latency (CL) 30
tRAS timing 76
tRCD timing 40
tRP timing 40

This DDR5 kit operates at a tested speed of 6000 MHz, while its SPD-rated speed sits at 4800 MHz. The primary timings are set at CL30-40-40-76, covering CAS Latency, tRCD, tRP, and tRAS respectively, with a resulting true latency of 10 ns.

General info:

form factor 288-pin DIMM
memory size (total) 2 x 16GB
has Samsung B-Die ✕
voltage 1.35V
height 44 mm
memory size 16GB

The kit consists of two 16GB 288-pin DIMM modules, totaling 32GB of capacity, and operates at a voltage of 1.35V. Each module stands 44 mm tall, and the kit does not use Samsung B-Die ICs.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0, AMD EXPO
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✓

The kit supports both Intel XMP 3.0 and AMD EXPO profiles for straightforward speed configuration on compatible platforms. It includes an integrated heatsink and RGB lighting, though it does not support ECC memory.

Benchmarks:

Final Verdict

The Patriot Viper Xtreme 5 RGB DDR5-6000 C30 32GB kit is a straightforward DDR5 option for desktop builders seeking a dual-channel setup with broad platform compatibility across both Intel and AMD systems. Its 6000 MHz tested speed paired with CL30-40-40-76 timings represents a well-calibrated out-of-box configuration, and the inclusion of both XMP 3.0 and EXPO profiles removes much of the manual setup burden. The integrated heatsink and RGB lighting add practical and aesthetic value for those building illuminated systems. It does carry notable limitations — no ECC support, no Samsung B-Die ICs, and a module height that may not suit all cooler configurations — so it is best matched to mainstream gaming or general-purpose desktop builds rather than workstation or enthusiast overclocking scenarios. Within that scope, it delivers a cohesive and reliable DDR5 package.