TurboVS
Patriot Viper Xtreme 5 RGB DDR5-6000 C36 32GB (2x16GB) specifications and in-depth review

Patriot Viper Xtreme 5 RGB DDR5-6000 C36 32GB (2x16GB)

Manufacturer: Patriot

The Patriot Viper Xtreme 5 RGB DDR5-6000 C36 is a 32GB dual-channel memory kit designed for systems that support DDR5. It comes as two 16GB modules in the standard 288-pin DIMM form factor and features an integrated heatsink alongside RGB lighting, keeping both thermals and aesthetics in mind without adding excessive height at 44 mm.

Operating at a tested speed of 6000 MHz with a CL36-36-36-76 timing configuration, the kit achieves a true latency of 12 ns at 1.35V. It supports both Intel XMP 3.0 and AMD EXPO profiles for straightforward setup on compatible platforms. The SPD base speed sits at 4800 MHz, ECC is not supported, and the modules do not use Samsung B-Die.

Pros
  • Supports both Intel XMP 3.0 and AMD EXPO profiles, making it compatible with a wider range of platforms without manual timing configuration
  • Runs at 6000 MHz tested speed with a true latency of 12 ns, reflecting a well-balanced clock and timing relationship
  • Integrated heatsink helps manage heat dissipation during operation
  • RGB lighting is included for users who want visual customization in their build
  • Ships as a matched dual-channel kit, which is preferable for memory controller stability over mixing modules
Cons
  • CL36 primary timings are relatively loose for DDR5 memory running at 6000 MHz
  • Does not use Samsung B-Die, which some enthusiasts specifically seek out for overclocking headroom
  • ECC is not supported, limiting use in workloads or platforms that require error-correcting memory
  • At 44 mm tall, the heatsink may conflict with large CPU coolers depending on motherboard layout
Who is this for?

This kit is a solid fit for desktop builders running platforms that support Intel XMP 3.0 or AMD EXPO, as the automatic profile loading removes the need for manual tuning. Users assembling a mainstream to upper-midrange DDR5 system who also want RGB lighting and an integrated heatsink without sourcing separate cooling solutions will find the package practical. It also suits those building a dual-channel 32GB configuration for general productivity or gaming workloads where a matched kit matters for memory controller stability.

Who is this NOT for?

Users who prioritize tight sub-latency timings will find the CL36 timings relatively loose for the 6000 MHz speed, making this less appealing for enthusiasts focused on squeezing out maximum memory performance. It is also unsuitable for workstation or server environments that require ECC support, as error-correcting memory is not available on these modules. Additionally, builders pairing this kit with a large tower CPU cooler should verify clearance, as the 44 mm module height may cause fitment issues depending on the motherboard and cooler layout.

Performance:

true latency 12 ns
memory speed (Tested Speed) 6000
memory speed (SPD) 4800 MHz
DDR memory version 5
CAS Latency (CL) 36
tRAS timing 76
tRCD timing 36
tRP timing 36

This kit operates on DDR5 and runs at a tested speed of 6000 MHz, with a base SPD speed of 4800 MHz. The primary timings are set at CL36-36-36-76, covering CAS Latency, tRCD, tRP, and tRAS respectively, which together produce a true latency of 12 ns at these operating conditions.

General info:

form factor 288-pin DIMM
memory size (total) 2 x 16GB
has Samsung B-Die ✕
voltage 1.35V
height 44 mm
memory size 16GB

The kit uses the standard 288-pin DIMM form factor and consists of two 16GB modules for a total capacity of 32GB. Each module operates at 1.35V and stands 44 mm tall, which is worth noting for builds with tighter clearance. Samsung B-Die is not used in these modules.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0, AMD EXPO
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✓

The modules support both Intel XMP 3.0 and AMD EXPO profiles, allowing compatible platforms to load the rated speed and timings automatically. An integrated heatsink is included, and the kit features RGB lighting. ECC memory is not supported.

Benchmarks:

Final Verdict

The Patriot Viper Xtreme 5 RGB DDR5-6000 C36 32GB kit lands in a practical spot for DDR5 desktop builds where broad platform compatibility and a complete out-of-the-box experience matter. Its dual support for Intel XMP 3.0 and AMD EXPO makes it accessible across a wide range of current-generation motherboards, and the combination of an integrated heatsink and RGB lighting means the kit is ready to install without additional considerations. The CL36 timings and absence of ECC mean it is not aimed at users with demanding latency sensitivity or error-correcting requirements, but for a mainstream 32GB dual-channel DDR5 configuration running at 6000 MHz, it covers the essentials competently and without unnecessary compromise.